[ 0.000000] Linux version 2.6.31.12-0.2-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 [ 0.000000] Command line: root=/dev/disk/by-id/ata-FUJITSU_MHY2250BH_K43CT862GP1J-part2 resume=/dev/disk/by-id/ata-FUJITSU_MHY2250BH_K43CT862GP1J-part3 splash=silent quiet vga=0x317 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000becd3000 (usable) [ 0.000000] BIOS-e820: 00000000becd3000 - 00000000beed4000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000beed4000 - 00000000bef87000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bef87000 - 00000000bef89000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bef89000 - 00000000bfec3000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfec3000 - 00000000bfec5000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfec5000 - 00000000bfec8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfec8000 - 00000000bfecb000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfecb000 - 00000000bfecc000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfecc000 - 00000000bfedf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved) [ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbecd3 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000becd3000 (usable) [ 0.000000] modified: 00000000becd3000 - 00000000beed4000 (ACPI NVS) [ 0.000000] modified: 00000000beed4000 - 00000000bef87000 (ACPI data) [ 0.000000] modified: 00000000bef87000 - 00000000bef89000 (ACPI NVS) [ 0.000000] modified: 00000000bef89000 - 00000000bfec3000 (ACPI data) [ 0.000000] modified: 00000000bfec3000 - 00000000bfec5000 (ACPI NVS) [ 0.000000] modified: 00000000bfec5000 - 00000000bfec8000 (ACPI data) [ 0.000000] modified: 00000000bfec8000 - 00000000bfecb000 (ACPI NVS) [ 0.000000] modified: 00000000bfecb000 - 00000000bfecc000 (ACPI data) [ 0.000000] modified: 00000000bfecc000 - 00000000bfedf000 (ACPI NVS) [ 0.000000] modified: 00000000bfedf000 - 00000000bfef9000 (ACPI data) [ 0.000000] modified: 00000000bfef9000 - 00000000bfeff000 (reserved) [ 0.000000] modified: 00000000bfeff000 - 00000000bff00000 (ACPI data) [ 0.000000] modified: 00000000bff00000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000becd3000 [ 0.000000] 0000000000 - 00bec00000 page 2M [ 0.000000] 00bec00000 - 00becd3000 page 4k [ 0.000000] kernel direct mapping tables up to becd3000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 [ 0.000000] RAMDISK: 3799c000 - 37fef63f [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE ) [ 0.000000] ACPI: XSDT 00000000bfeee1c0 00084 (v01 APPLE Apple00 000000C1 01000013) [ 0.000000] ACPI: FACP 00000000bfeec000 000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F) [ 0.000000] ACPI: DSDT 00000000bfee1000 0498E (v01 APPLE MacBookP 00040001 INTL 20061109) [ 0.000000] ACPI: FACS 00000000bfecc000 00040 [ 0.000000] ACPI: HPET 00000000bfeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: APIC 00000000bfeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: MCFG 00000000bfee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: ASF! 00000000bfee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SBST 00000000bfee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: ECDT 00000000bfee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SSDT 00000000bfec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bfec6000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bfec5000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bfee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bfedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000023fff] [ 0.000000] bootmap [0000000000024000 - 000000000004bfff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001c4bf70] TEXT DATA BSS ==> [0001000000 - 0001c4bf70] [ 0.000000] #3 [003799c000 - 0037fef63f] RAMDISK ==> [003799c000 - 0037fef63f] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001c4c000 - 0001c4c221] BRK ==> [0001c4c000 - 0001c4c221] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001e00000-ffff8800055fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000becd3 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1043565 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3835 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 763147 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000becd3000 - 00000000beed4000 [ 0.000000] PM: Registered nosave memory: 00000000beed4000 - 00000000bef87000 [ 0.000000] PM: Registered nosave memory: 00000000bef87000 - 00000000bef89000 [ 0.000000] PM: Registered nosave memory: 00000000bef89000 - 00000000bfec3000 [ 0.000000] PM: Registered nosave memory: 00000000bfec3000 - 00000000bfec5000 [ 0.000000] PM: Registered nosave memory: 00000000bfec5000 - 00000000bfec8000 [ 0.000000] PM: Registered nosave memory: 00000000bfec8000 - 00000000bfecb000 [ 0.000000] PM: Registered nosave memory: 00000000bfecb000 - 00000000bfecc000 [ 0.000000] PM: Registered nosave memory: 00000000bfecc000 - 00000000bfedf000 [ 0.000000] PM: Registered nosave memory: 00000000bfedf000 - 00000000bfef9000 [ 0.000000] PM: Registered nosave memory: 00000000bfef9000 - 00000000bfeff000 [ 0.000000] PM: Registered nosave memory: 00000000bfeff000 - 00000000bff00000 [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages at ffff88000564b000, static data 82784 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1025542 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-FUJITSU_MHY2250BH_K43CT862GP1J-part2 resume=/dev/disk/by-id/ata-FUJITSU_MHY2250BH_K43CT862GP1J-part3 splash=silent quiet vga=0x317 [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff88000568c000 - ffff88000968c000 [ 0.000000] software IO TLB at phys 0x568c000 - 0x968c000 [ 0.000000] Memory: 4031172k/5242880k available (5500k kernel code, 1068620k absent, 143088k reserved, 4470k data, 980k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2494.124 MHz processor. [ 0.000094] Console: colour dummy device 80x25 [ 0.000097] console [tty0] enabled [ 0.000291] hpet clockevent registered [ 0.000297] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000305] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.24 BogoMIPS (lpj=2494124) [ 0.000412] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.000512] Security Framework initialized [ 0.000535] AppArmor: AppArmor initialized [ 0.000863] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003008] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004140] Mount-cache hash table entries: 256 [ 0.004328] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004330] CPU: L2 cache: 6144K [ 0.004333] CPU 0/0x0 -> Node 0 [ 0.004335] CPU: Physical Processor ID: 0 [ 0.004337] CPU: Processor Core ID: 0 [ 0.004340] mce: CPU supports 6 MCE banks [ 0.004347] CPU0: Thermal monitoring enabled (TM2) [ 0.004351] using mwait in idle threads. [ 0.004352] Performance Counters: Core2 events, Intel PMU driver. [ 0.004358] ... version: 2 [ 0.004359] ... bit width: 40 [ 0.004361] ... generic counters: 2 [ 0.004362] ... value mask: 000000ffffffffff [ 0.004363] ... max period: 000000007fffffff [ 0.004365] ... fixed-purpose counters: 3 [ 0.004366] ... counter mask: 0000000700000003 [ 0.005297] ACPI: Core revision 20090521 [ 0.013543] Setting APIC routing to flat [ 0.013931] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.023940] CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 [ 0.023996] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4987.24 BogoMIPS (lpj=2493620) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 6144K [ 0.000999] CPU 1/0x1 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] mce: CPU supports 6 MCE banks [ 0.000999] CPU1: Thermal monitoring enabled (TM2) [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.095928] CPU1: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 [ 0.095939] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.096015] Brought up 2 CPUs [ 0.096015] Total of 2 processors activated (9975.48 BogoMIPS). [ 0.096077] CPU0 attaching sched-domain: [ 0.096080] domain 0: span 0-1 level MC [ 0.096082] groups: 0 1 [ 0.096087] CPU1 attaching sched-domain: [ 0.096089] domain 0: span 0-1 level MC [ 0.096091] groups: 1 0 [ 0.099040] devtmpfs: initialized [ 0.103053] Booting paravirtualized kernel on bare hardware [ 0.103179] regulator: core version 0.5 [ 0.103179] Time: 13:30:05 Date: 06/28/10 [ 0.103179] NET: Registered protocol family 16 [ 0.103222] ACPI: bus type pci registered [ 0.103294] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 [ 0.103297] PCI: MCFG area at f0000000 reserved in E820 [ 0.103299] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.105223] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.105225] PCI: Using configuration type 1 for base access [ 0.108068] bio: create slab at 0 [ 0.112747] ACPI: EC: EC description table is found, configuring boot EC [ 0.112877] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.119010] ACPI: BIOS _OSI(Linux) query ignored [ 0.119355] ACPI: Interpreter enabled [ 0.119358] ACPI: (supports S0 S3 S4 S5) [ 0.119381] ACPI: Using IOAPIC for interrupt routing [ 0.138118] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.138120] ACPI: EC: driver started in interrupt mode [ 0.138452] ACPI: No dock devices found. [ 0.139283] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.139391] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.139395] pci 0000:00:01.0: PME# disabled [ 0.139575] pci 0000:00:1a.0: reg 20 io port: [0x80c0-0x80df] [ 0.139703] pci 0000:00:1a.1: reg 20 io port: [0x80a0-0x80bf] [ 0.139844] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdb504c00-0xdb504fff] [ 0.139981] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.139988] pci 0000:00:1a.7: PME# disabled [ 0.140074] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdb500000-0xdb503fff] [ 0.140162] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.140171] pci 0000:00:1b.0: PME# disabled [ 0.140288] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.140297] pci 0000:00:1c.0: PME# disabled [ 0.140417] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.140423] pci 0000:00:1c.2: PME# disabled [ 0.140543] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.140550] pci 0000:00:1c.4: PME# disabled [ 0.140657] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.140663] pci 0000:00:1c.5: PME# disabled [ 0.140777] pci 0000:00:1d.0: reg 20 io port: [0x8080-0x809f] [ 0.140912] pci 0000:00:1d.1: reg 20 io port: [0x8060-0x807f] [ 0.141039] pci 0000:00:1d.2: reg 20 io port: [0x8040-0x805f] [ 0.141174] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdb504800-0xdb504bff] [ 0.141306] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.141314] pci 0000:00:1d.7: PME# disabled [ 0.141553] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.141559] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.141565] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) [ 0.141571] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) [ 0.141581] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) [ 0.141662] pci 0000:00:1f.1: reg 10 io port: [0x8108-0x810f] [ 0.141676] pci 0000:00:1f.1: reg 14 io port: [0x811c-0x811f] [ 0.141692] pci 0000:00:1f.1: reg 18 io port: [0x8100-0x8107] [ 0.141705] pci 0000:00:1f.1: reg 1c io port: [0x8118-0x811b] [ 0.141713] pci 0000:00:1f.1: reg 20 io port: [0x80e0-0x80ef] [ 0.141803] pci 0000:00:1f.2: reg 10 io port: [0x80f8-0x80ff] [ 0.141812] pci 0000:00:1f.2: reg 14 io port: [0x8114-0x8117] [ 0.141821] pci 0000:00:1f.2: reg 18 io port: [0x80f0-0x80f7] [ 0.141830] pci 0000:00:1f.2: reg 1c io port: [0x8110-0x8113] [ 0.141846] pci 0000:00:1f.2: reg 20 io port: [0x8020-0x802f] [ 0.141855] pci 0000:00:1f.2: reg 24 io port: [0x4000-0x400f] [ 0.141900] pci 0000:00:1f.2: PME# supported from D3hot [ 0.141909] pci 0000:00:1f.2: PME# disabled [ 0.141953] pci 0000:00:1f.3: reg 10 32bit mmio: [0xdb505000-0xdb5050ff] [ 0.141998] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf] [ 0.142090] pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff] [ 0.142106] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] [ 0.142120] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff] [ 0.142128] pci 0000:01:00.0: reg 24 io port: [0x7000-0x707f] [ 0.142135] pci 0000:01:00.0: reg 30 32bit mmio: [0xd3000000-0xd301ffff] [ 0.142400] pci 0000:00:01.0: bridge io port: [0x7000-0x7fff] [ 0.142403] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd30fffff] [ 0.142407] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.142534] pci 0000:00:1c.0: bridge 32bit mmio: [0xdb400000-0xdb4fffff] [ 0.142673] pci 0000:00:1c.2: bridge io port: [0x6000-0x6fff] [ 0.142680] pci 0000:00:1c.2: bridge 32bit mmio: [0xd7400000-0xdb3fffff] [ 0.142689] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xd3100000-0xd70fffff] [ 0.143082] pci 0000:0b:00.0: reg 10 64bit mmio: [0xd7300000-0xd7303fff] [ 0.143341] pci 0000:0b:00.0: supports D1 D2 [ 0.143343] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.143358] pci 0000:0b:00.0: PME# disabled [ 0.143969] pci 0000:00:1c.4: bridge 32bit mmio: [0xd7300000-0xd73fffff] [ 0.144383] pci 0000:0c:00.0: reg 10 64bit mmio: [0xd7200000-0xd7203fff] [ 0.144434] pci 0000:0c:00.0: reg 18 io port: [0x5000-0x50ff] [ 0.144629] pci 0000:0c:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.144944] pci 0000:0c:00.0: supports D1 D2 [ 0.144946] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144972] pci 0000:0c:00.0: PME# disabled [ 0.147497] pci 0000:00:1c.5: bridge io port: [0x5000-0x5fff] [ 0.147506] pci 0000:00:1c.5: bridge 32bit mmio: [0xd7200000-0xd72fffff] [ 0.147599] pci 0000:0d:03.0: reg 10 32bit mmio: [0xd7104000-0xd71047ff] [ 0.147610] pci 0000:0d:03.0: reg 14 32bit mmio: [0xd7100000-0xd7103fff] [ 0.147709] pci 0000:0d:03.0: supports D1 D2 [ 0.147711] pci 0000:0d:03.0: PME# supported from D0 D1 D2 D3hot [ 0.147718] pci 0000:0d:03.0: PME# disabled [ 0.147836] pci 0000:00:1e.0: transparent bridge [ 0.147852] pci 0000:00:1e.0: bridge 32bit mmio: [0xd7100000-0xd71fffff] [ 0.147908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.148105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.148188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.148262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.148337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.148441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.157538] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.157648] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.157758] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.157868] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.157981] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.158089] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9 [ 0.158197] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.158306] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.158483] SCSI subsystem initialized [ 0.158500] libata version 3.00 loaded. [ 0.158500] usbcore: registered new interface driver usbfs [ 0.158500] usbcore: registered new interface driver hub [ 0.158500] usbcore: registered new device driver usb [ 0.158500] PCI: Using ACPI for IRQ routing [ 0.161010] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.161014] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.166061] AppArmor: AppArmor Filesystem Enabled [ 0.167981] pnp: PnP ACPI init [ 0.167989] ACPI: bus type pnp registered [ 0.180631] pnp: PnP ACPI: found 9 devices [ 0.180634] ACPI: ACPI bus type pnp unregistered [ 0.180643] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.180646] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.180649] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.180651] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.180654] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.180656] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.180659] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.180665] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.180670] system 00:07: ioport range 0x680-0x69f has been reserved [ 0.180673] system 00:07: ioport range 0x800-0x80f has been reserved [ 0.180675] system 00:07: ioport range 0x810-0x817 has been reserved [ 0.180678] system 00:07: ioport range 0x400-0x47f has been reserved [ 0.180680] system 00:07: ioport range 0x500-0x53f has been reserved [ 0.180682] system 00:07: ioport range 0x1640-0x164f has been reserved [ 0.187521] pci 0000:0c:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.187622] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.187625] pci 0000:00:01.0: IO window: 0x7000-0x7fff [ 0.187629] pci 0000:00:01.0: MEM window: 0xd0000000-0xd30fffff [ 0.187632] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.187636] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.187638] pci 0000:00:1c.0: IO window: disabled [ 0.187645] pci 0000:00:1c.0: MEM window: 0xdb400000-0xdb4fffff [ 0.187652] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.187658] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 [ 0.187663] pci 0000:00:1c.2: IO window: 0x6000-0x6fff [ 0.187671] pci 0000:00:1c.2: MEM window: 0xd7400000-0xdb3fffff [ 0.187678] pci 0000:00:1c.2: PREFETCH window: 0x000000d3100000-0x000000d70fffff [ 0.187692] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0b [ 0.187694] pci 0000:00:1c.4: IO window: disabled [ 0.187704] pci 0000:00:1c.4: MEM window: 0xd7300000-0xd73fffff [ 0.187711] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.187718] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0c [ 0.187723] pci 0000:00:1c.5: IO window: 0x5000-0x5fff [ 0.187735] pci 0000:00:1c.5: MEM window: 0xd7200000-0xd72fffff [ 0.187742] pci 0000:00:1c.5: PREFETCH window: 0xdb600000-0xdb6fffff [ 0.187751] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d [ 0.187753] pci 0000:00:1e.0: IO window: disabled [ 0.187765] pci 0000:00:1e.0: MEM window: 0xd7100000-0xd71fffff [ 0.187771] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.187785] alloc irq_desc for 16 on node 0 [ 0.187787] alloc kstat_irqs on node 0 [ 0.187792] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.187795] pci 0000:00:01.0: setting latency timer to 64 [ 0.187809] pci 0000:00:1c.0: enabling device (0000 -> 0002) [ 0.187815] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.187827] pci 0000:00:1c.0: setting latency timer to 64 [ 0.187840] pci 0000:00:1c.2: enabling device (0000 -> 0003) [ 0.187845] alloc irq_desc for 18 on node 0 [ 0.187847] alloc kstat_irqs on node 0 [ 0.187850] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.187858] pci 0000:00:1c.2: setting latency timer to 64 [ 0.187875] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.187882] pci 0000:00:1c.4: setting latency timer to 64 [ 0.187898] alloc irq_desc for 17 on node 0 [ 0.187900] alloc kstat_irqs on node 0 [ 0.187903] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.187907] pci 0000:00:1c.5: setting latency timer to 64 [ 0.187975] pci 0000:00:1e.0: power state changed by ACPI to D0 [ 0.187988] pci 0000:00:1e.0: setting latency timer to 64 [ 0.187994] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.187996] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.187999] pci_bus 0000:01: resource 0 io: [0x7000-0x7fff] [ 0.188001] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd30fffff] [ 0.188003] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.188005] pci_bus 0000:02: resource 1 mem: [0xdb400000-0xdb4fffff] [ 0.188007] pci_bus 0000:03: resource 0 io: [0x6000-0x6fff] [ 0.188009] pci_bus 0000:03: resource 1 mem: [0xd7400000-0xdb3fffff] [ 0.188011] pci_bus 0000:03: resource 2 pref mem [0xd3100000-0xd70fffff] [ 0.188013] pci_bus 0000:0b: resource 1 mem: [0xd7300000-0xd73fffff] [ 0.188015] pci_bus 0000:0c: resource 0 io: [0x5000-0x5fff] [ 0.188017] pci_bus 0000:0c: resource 1 mem: [0xd7200000-0xd72fffff] [ 0.188019] pci_bus 0000:0c: resource 2 pref mem [0xdb600000-0xdb6fffff] [ 0.188022] pci_bus 0000:0d: resource 1 mem: [0xd7100000-0xd71fffff] [ 0.188024] pci_bus 0000:0d: resource 3 io: [0x00-0xffff] [ 0.188026] pci_bus 0000:0d: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.188081] NET: Registered protocol family 2 [ 0.188246] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.189383] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.193055] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.193627] TCP: Hash tables configured (established 524288 bind 65536) [ 0.193629] TCP reno registered [ 0.193806] NET: Registered protocol family 1 [ 0.193882] Unpacking initramfs... [ 0.301490] Freeing initrd memory: 6477k freed [ 0.304735] Scanning for low memory corruption every 60 seconds [ 0.304961] audit: initializing netlink socket (disabled) [ 0.304980] type=2000 audit(1277731805.304:1): initialized [ 0.308203] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.308337] VFS: Disk quotas dquot_6.5.2 [ 0.308375] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.308529] msgmni has been set to 1971 [ 0.308621] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.308624] io scheduler noop registered [ 0.308626] io scheduler anticipatory registered [ 0.308628] io scheduler deadline registered [ 0.308647] io scheduler cfq registered (default) [ 0.308922] pci 0000:01:00.0: Boot video device [ 0.309068] alloc irq_desc for 24 on node 0 [ 0.309070] alloc kstat_irqs on node 0 [ 0.309082] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.309088] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.309257] alloc irq_desc for 25 on node 0 [ 0.309258] alloc kstat_irqs on node 0 [ 0.309269] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.309281] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.309497] alloc irq_desc for 26 on node 0 [ 0.309498] alloc kstat_irqs on node 0 [ 0.309515] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.309531] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.309721] alloc irq_desc for 27 on node 0 [ 0.309723] alloc kstat_irqs on node 0 [ 0.309738] pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X [ 0.309750] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.309941] alloc irq_desc for 28 on node 0 [ 0.309943] alloc kstat_irqs on node 0 [ 0.309960] pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X [ 0.309976] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.310113] pci-stub: invalid id string "" [ 0.310273] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90005100000, using 3072k, total 14336k [ 0.310276] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 0.310278] vesafb: scrolling: redraw [ 0.310280] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.310662] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.323163] bootsplash: silentjpeg size 141141 bytes [ 0.335517] bootsplash: ...found (1024x768, 146379 bytes, v3). [ 0.383300] Console: switching to colour frame buffer device 124x44 [ 0.430804] fb0: VESA VGA frame buffer device [ 0.430813] efifb: dmi detected MacBookPro4,1 - framebuffer at 00000000c0060000 (1920x1200, stride 8192) [ 0.432238] Non-volatile memory driver v1.3 [ 0.432240] Linux agpgart interface v0.103 [ 0.432244] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.432675] ata_piix 0000:00:1f.1: version 2.13 [ 0.432725] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 0.432736] alloc irq_desc for 21 on node 0 [ 0.432737] alloc kstat_irqs on node 0 [ 0.432744] ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.432786] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.432859] scsi0 : ata_piix [ 0.432943] scsi1 : ata_piix [ 0.433514] ata1: PATA max UDMA/100 cmd 0x8108 ctl 0x811c bmdma 0x80e0 irq 21 [ 0.433516] ata2: PATA max UDMA/100 cmd 0x8100 ctl 0x8118 bmdma 0x80e8 irq 21 [ 0.433735] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 0.433745] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ] [ 0.433790] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.433863] scsi2 : ata_piix [ 0.433911] scsi3 : ata_piix [ 0.434859] ata3: SATA max UDMA/133 cmd 0x80f8 ctl 0x8114 bmdma 0x8020 irq 18 [ 0.434861] ata4: SATA max UDMA/133 cmd 0x80f0 ctl 0x8110 bmdma 0x8028 irq 18 [ 0.434914] Fixed MDIO Bus: probed [ 0.434920] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.436917] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.436938] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.436944] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.436970] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.440901] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.440910] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.440915] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xdb504c00 [ 0.449922] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.449962] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.449964] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.449966] usb usb1: Product: EHCI Host Controller [ 0.449968] usb usb1: Manufacturer: Linux 2.6.31.12-0.2-desktop ehci_hcd [ 0.449970] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.450028] usb usb1: configuration #1 chosen from 1 choice [ 0.450055] hub 1-0:1.0: USB hub found [ 0.450063] hub 1-0:1.0: 4 ports detected [ 0.451915] alloc irq_desc for 20 on node 0 [ 0.451917] alloc kstat_irqs on node 0 [ 0.451924] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20 [ 0.451936] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.451942] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.451949] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.455882] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.455892] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.455907] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdb504800 [ 0.464919] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.464933] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.464935] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.464937] usb usb2: Product: EHCI Host Controller [ 0.464939] usb usb2: Manufacturer: Linux 2.6.31.12-0.2-desktop ehci_hcd [ 0.464941] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.464991] usb usb2: configuration #1 chosen from 1 choice [ 0.465016] hub 2-0:1.0: USB hub found [ 0.465022] hub 2-0:1.0: 6 ports detected [ 0.465090] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.465103] uhci_hcd: USB Universal Host Controller Interface driver [ 0.466903] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.466917] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.466922] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.466930] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.466963] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000080c0 [ 0.467004] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.467006] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.467008] usb usb3: Product: UHCI Host Controller [ 0.467010] usb usb3: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd [ 0.467012] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.467060] usb usb3: configuration #1 chosen from 1 choice [ 0.467082] hub 3-0:1.0: USB hub found [ 0.467089] hub 3-0:1.0: 2 ports detected [ 0.468903] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.468915] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.468920] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.468931] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.468972] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000080a0 [ 0.469007] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.469010] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.469011] usb usb4: Product: UHCI Host Controller [ 0.469013] usb usb4: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd [ 0.469015] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.469063] usb usb4: configuration #1 chosen from 1 choice [ 0.469085] hub 4-0:1.0: USB hub found [ 0.469091] hub 4-0:1.0: 2 ports detected [ 0.470902] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.470917] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.470922] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.470929] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.470964] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00008080 [ 0.471000] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.471002] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.471004] usb usb5: Product: UHCI Host Controller [ 0.471006] usb usb5: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd [ 0.471008] usb usb5: SerialNumber: 0000:00:1d.0 [ 0.471063] usb usb5: configuration #1 chosen from 1 choice [ 0.471086] hub 5-0:1.0: USB hub found [ 0.471092] hub 5-0:1.0: 2 ports detected [ 0.472902] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 0.472917] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.472922] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.472929] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.472963] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00008060 [ 0.472998] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.473001] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.473002] usb usb6: Product: UHCI Host Controller [ 0.473004] usb usb6: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd [ 0.473006] usb usb6: SerialNumber: 0000:00:1d.1 [ 0.473053] usb usb6: configuration #1 chosen from 1 choice [ 0.473078] hub 6-0:1.0: USB hub found [ 0.473084] hub 6-0:1.0: 2 ports detected [ 0.474901] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.474914] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.474920] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.474927] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.474961] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00008040 [ 0.474997] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.474999] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.475001] usb usb7: Product: UHCI Host Controller [ 0.475003] usb usb7: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd [ 0.475005] usb usb7: SerialNumber: 0000:00:1d.2 [ 0.475054] usb usb7: configuration #1 chosen from 1 choice [ 0.475076] hub 7-0:1.0: USB hub found [ 0.475084] hub 7-0:1.0: 2 ports detected [ 0.475143] Initializing USB Mass Storage driver... [ 0.475175] usbcore: registered new interface driver usb-storage [ 0.475177] USB Mass Storage support registered. [ 0.475206] usbcore: registered new interface driver libusual [ 0.475216] usbcore: registered new interface driver ums-alauda [ 0.475227] usbcore: registered new interface driver ums-cypress [ 0.475237] usbcore: registered new interface driver ums-datafab [ 0.475247] usbcore: registered new interface driver ums-freecom [ 0.475258] usbcore: registered new interface driver ums-isd200 [ 0.475268] usbcore: registered new interface driver ums-jumpshot [ 0.475278] usbcore: registered new interface driver ums-karma [ 0.475289] usbcore: registered new interface driver ums-onetouch [ 0.475300] usbcore: registered new interface driver ums-sddr09 [ 0.475310] usbcore: registered new interface driver ums-sddr55 [ 0.475321] usbcore: registered new interface driver ums-usbat [ 0.475357] PNP: No PS/2 controller found. Probing ports directly. [ 0.476245] i8042.c: No controller found. [ 0.476295] mice: PS/2 mouse device common for all mice [ 0.476371] rtc_cmos 00:08: RTC can wake from S4 [ 0.476402] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.476441] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.476450] cpuidle: using governor ladder [ 0.476452] cpuidle: using governor menu [ 0.476673] usbcore: registered new interface driver hiddev [ 0.476685] usbcore: registered new interface driver usbhid [ 0.476687] usbhid: v2.6:USB HID core driver [ 0.500896] Switched to high resolution mode on CPU 1 [ 0.500907] Switched to high resolution mode on CPU 0 [ 0.558957] TCP cubic registered [ 0.559015] NET: Registered protocol family 10 [ 0.559424] lo: Disabled Privacy Extensions [ 0.559711] lib80211: common routines for IEEE802.11 drivers [ 0.559714] lib80211_crypt: registered algorithm 'NULL' [ 0.559788] PM: Checking image partition /dev/disk/by-id/ata-FUJITSU_MHY2250BH_K43CT862GP1J-part3 [ 0.600245] ata3.00: ATA-8: FUJITSU MHY2250BH, 0081000D, max UDMA/100 [ 0.600247] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.600409] ata1.00: ATAPI: MATSHITADVD-R UJ-867, HA13, max UDMA/66 [ 0.606603] ata3.00: configured for UDMA/100 [ 0.606632] ata1.00: configured for UDMA/66 [ 0.608883] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-867 HA13 PQ: 0 ANSI: 5 [ 0.609318] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2250B 0081 PQ: 0 ANSI: 5 [ 0.609409] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.609453] sd 2:0:0:0: [sda] Write Protect is off [ 0.609456] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.609478] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.609594] sda: sda1 sda2 sda3 [ 0.684676] sd 2:0:0:0: [sda] Attached SCSI disk [ 0.684681] PM: Resume from disk failed. [ 0.684693] registered taskstats version 1 [ 0.684800] Magic number: 14:958:534 [ 0.684877] rtc_cmos 00:08: setting system clock to 2010-06-28 13:30:06 UTC (1277731806) [ 0.684965] Freeing unused kernel memory: 980k freed [ 0.685364] Write protecting the kernel read-only data: 8860k [ 0.718978] Uniform Multi-Platform E-IDE driver [ 0.726638] ACPI: SSDT 00000000bfecac18 00382 (v01 APPLE Cpu0Ist 00003000 INTL 20061109) [ 0.727056] ACPI: SSDT 00000000bfec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109) [ 0.729172] Monitor-Mwait will be used to enter C-1 state [ 0.729189] Monitor-Mwait will be used to enter C-2 state [ 0.729208] Monitor-Mwait will be used to enter C-3 state [ 0.729212] Marking TSC unstable due to TSC halts in idle [ 0.729262] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.729288] processor LNXCPU:00: registered as cooling_device0 [ 0.729291] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.729668] ACPI: SSDT 00000000bfec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109) [ 0.729996] ACPI: SSDT 00000000bfec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109) [ 0.733314] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.733331] processor LNXCPU:01: registered as cooling_device1 [ 0.733334] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.739135] udev: starting version 146 [ 0.956410] usb 2-4: new high speed USB device using ehci_hcd and address 3 [ 1.000056] Clocksource tsc unstable (delta = -147141663 ns) [ 1.070926] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 1.070929] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 1.070933] PM: Marking nosave pages: 00000000becd3000 - 0000000100000000 [ 1.071771] PM: Basic memory bitmaps created [ 1.090685] PM: Basic memory bitmaps freed [ 1.096647] PM: Starting manual resume from disk [ 1.096650] PM: Resume from partition 8:3 [ 1.096651] PM: Checking hibernation image. [ 1.096923] PM: Resume from disk failed. [ 1.121466] usb 2-4: New USB device found, idVendor=05ac, idProduct=8502 [ 1.121472] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.121476] usb 2-4: Product: Built-in iSight [ 1.121480] usb 2-4: Manufacturer: Apple Inc. [ 1.121483] usb 2-4: SerialNumber: 8J86KG338ZJ63E00 [ 1.121622] usb 2-4: configuration #1 chosen from 1 choice [ 1.195212] EXT4-fs (sda2): barriers enabled [ 1.208247] kjournald2 starting: pid 255, dev sda2:8, commit interval 5 seconds [ 1.208989] EXT4-fs (sda2): internal journal on sda2:8 [ 1.209001] EXT4-fs (sda2): delayed allocation enabled [ 1.209003] EXT4-fs: file extents enabled [ 1.217709] EXT4-fs: mballoc enabled [ 1.217720] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 1.482169] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.645012] usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500 [ 1.645018] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.645023] usb 3-1: Product: BRCM2046 Hub [ 1.645026] usb 3-1: Manufacturer: Apple Inc. [ 1.645140] usb 3-1: configuration #1 chosen from 1 choice [ 1.647017] hub 3-1:1.0: USB hub found [ 1.648995] hub 3-1:1.0: 3 ports detected [ 1.860153] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 1.993002] usb 5-1: not running at top speed; connect to a high speed hub [ 2.013023] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608 [ 2.013029] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.013033] usb 5-1: Product: USB2.0 Hub [ 2.013125] usb 5-1: configuration #1 chosen from 1 choice [ 2.016067] hub 5-1:1.0: USB hub found [ 2.017984] hub 5-1:1.0: 4 ports detected [ 2.230161] usb 7-1: new low speed USB device using uhci_hcd and address 2 [ 2.396023] usb 7-1: New USB device found, idVendor=05ac, idProduct=8242 [ 2.396029] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.396033] usb 7-1: Product: IR Receiver [ 2.396037] usb 7-1: Manufacturer: Apple Computer, Inc. [ 2.396127] usb 7-1: configuration #1 chosen from 1 choice [ 2.430123] apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0 [ 2.637082] usb 7-2: new full speed USB device using uhci_hcd and address 3 [ 2.815025] usb 7-2: New USB device found, idVendor=05ac, idProduct=0231 [ 2.815032] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.815036] usb 7-2: Product: Apple Internal Keyboard / Trackpad [ 2.815040] usb 7-2: Manufacturer: Apple, Inc. [ 2.815141] usb 7-2: configuration #1 chosen from 1 choice [ 2.824557] input: Apple, Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input0 [ 2.824615] apple 0003:05AC:0231.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0 [ 3.330093] apple 0003:05AC:0231.0003: hidraw2: USB HID v1.11 Device [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input1 [ 3.400015] usb 3-1.1: new full speed USB device using uhci_hcd and address 3 [ 3.518967] usb 3-1.1: New USB device found, idVendor=05ac, idProduct=820f [ 3.518970] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.518972] usb 3-1.1: Product: Bluetooth USB Host Controller [ 3.518974] usb 3-1.1: Manufacturer: Apple Inc. [ 3.518976] usb 3-1.1: SerialNumber: 001FF3AD5708 [ 3.519058] usb 3-1.1: configuration #1 chosen from 1 choice [ 3.590001] usb 5-1.1: new full speed USB device using uhci_hcd and address 3 [ 3.679020] usb 5-1.1: not running at top speed; connect to a high speed hub [ 3.686000] usb 5-1.1: New USB device found, idVendor=0424, idProduct=2502 [ 3.686006] usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.686102] usb 5-1.1: configuration #1 chosen from 1 choice [ 3.688044] hub 5-1.1:1.0: USB hub found [ 3.688997] hub 5-1.1:1.0: 2 ports detected [ 3.760002] usb 5-1.2: new low speed USB device using uhci_hcd and address 4 [ 3.889038] usb 5-1.2: New USB device found, idVendor=046d, idProduct=c505 [ 3.889044] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.889048] usb 5-1.2: Product: USB Receiver [ 3.889052] usb 5-1.2: Manufacturer: Logitech [ 3.889152] usb 5-1.2: configuration #1 chosen from 1 choice [ 3.906301] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input1 [ 3.906357] generic-usb 0003:046D:C505.0004: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 [ 3.939526] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input2 [ 3.939622] generic-usb 0003:046D:C505.0005: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 [ 3.966992] preloadtrace: systemtap: 1.0/0.142, base: ffffffffa00ed000, memory: 49756+81492+26032+14000 data+text+ctx+net, probes: 44 [ 4.007996] usb 5-1.3: new full speed USB device using uhci_hcd and address 5 [ 4.101992] usb 5-1.3: not running at top speed; connect to a high speed hub [ 4.129987] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [ 4.129990] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 4.129993] usb 5-1.3: Product: Pinnacle PCTV [ 4.129994] usb 5-1.3: SerialNumber: 000009001167 [ 4.130121] usb 5-1.3: configuration #1 chosen from 1 choice [ 4.213997] usb 5-1.1.1: new full speed USB device using uhci_hcd and address 6 [ 4.315995] usb 5-1.1.1: not running at top speed; connect to a high speed hub [ 4.322985] usb 5-1.1.1: New USB device found, idVendor=0424, idProduct=2602 [ 4.322987] usb 5-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.323095] usb 5-1.1.1: configuration #1 chosen from 1 choice [ 4.325074] hub 5-1.1.1:1.0: USB hub found [ 4.326990] hub 5-1.1.1:1.0: 4 ports detected [ 4.616994] usb 5-1.1.1.1: new full speed USB device using uhci_hcd and address 7 [ 4.740022] usb 5-1.1.1.1: not running at top speed; connect to a high speed hub [ 4.824001] usb 5-1.1.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 4.824026] usb 5-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.824030] usb 5-1.1.1.1: Product: Flash Card Reader [ 4.824034] usb 5-1.1.1.1: Manufacturer: Generic [ 4.824037] usb 5-1.1.1.1: SerialNumber: 071005102750 [ 4.824156] usb 5-1.1.1.1: configuration #1 chosen from 1 choice [ 4.826216] scsi4 : SCSI emulation for USB Mass Storage devices [ 4.826303] usb-storage: device found at 7 [ 4.826305] usb-storage: waiting for device to settle before scanning [ 5.837035] scsi 4:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 5.841044] scsi 4:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 5.903031] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 5.908030] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 5.908297] usb-storage: device scan complete [ 7.041598] udev: starting version 146 [ 7.077405] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 7.077449] ACPI: Power Button [PWRF] [ 7.077507] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 7.077607] ACPI: Lid Switch [LID0] [ 7.077648] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 7.077672] ACPI: Power Button [PWRB] [ 7.077712] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6 [ 7.077735] ACPI: Sleep Button [SLPB] [ 7.078068] ACPI: AC Adapter [ADP1] (on-line) [ 7.142983] nvidia: module license 'NVIDIA' taints kernel. [ 7.142987] Disabling lock debugging due to kernel taint [ 7.154117] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input7 [ 7.154166] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.165618] Bluetooth: Core ver 2.15 [ 7.166851] iTCO_vendor_support: vendor-support=0 [ 7.176426] sky2 driver version 1.23 [ 7.185579] NET: Registered protocol family 31 [ 7.185582] Bluetooth: HCI device and connection manager initialized [ 7.185585] Bluetooth: HCI socket layer initialized [ 7.188695] input: bcm5974 as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input8 [ 7.188913] usbcore: registered new interface driver bcm5974 [ 7.192758] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 7.192803] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 7.193005] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 7.193035] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 7.209354] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 7.209359] ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf] [ 7.209372] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.232433] sky2 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.232487] sky2 0000:0c:00.0: setting latency timer to 64 [ 7.232777] sky2 0000:0c:00.0: Yukon-2 EC Ultra chip revision 3 [ 7.233454] alloc irq_desc for 29 on node 0 [ 7.233456] alloc kstat_irqs on node 0 [ 7.233531] sky2 0000:0c:00.0: irq 29 for MSI/MSI-X [ 7.234589] sky2 eth0: addr 00:22:41:1e:f0:ad [ 7.251461] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 7.251585] usbcore: registered new interface driver btusb [ 7.251798] mbp_nvidia_bl: MacBookPro 4,1 detected [ 7.264640] wl 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.264846] wl 0000:0b:00.0: setting latency timer to 64 [ 7.330730] lib80211_crypt: registered algorithm 'TKIP' [ 7.369527] ACPI: Battery Slot [BAT0] (battery present) [ 7.381851] applesmc: Apple MacBook Pro 4 detected: [ 7.381853] applesmc: - Model with accelerometer [ 7.381855] applesmc: - Model with light sensors and backlight [ 7.381857] applesmc: - Model with 12 temperature sensors [ 7.383736] applesmc: device has already been initialized (0xe0, 0x00). [ 7.383738] applesmc: device successfully initialized. [ 7.384447] applesmc: 2 fans found. [ 7.387872] input: applesmc as /devices/platform/applesmc.768/input/input9 [ 7.398326] Registered led device: smc::kbd_backlight [ 7.398346] applesmc: driver successfully loaded. [ 7.412271] Linux video capture interface: v2.00 [ 7.414755] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8502) [ 7.417378] input: Built-in iSight as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10 [ 7.417437] usbcore: registered new interface driver uvcvideo [ 7.417440] USB Video Class driver (v0.1.0) [ 7.466556] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 7.466560] Uniform CD-ROM driver Revision: 3.20 [ 7.466648] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 7.491687] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 7.491881] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460) [ 7.491955] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 7.509326] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.509335] nvidia 0000:01:00.0: setting latency timer to 64 [ 7.509685] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010 [ 7.511678] eth1: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.60.48.36 [ 7.518798] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [ 7.518828] dvb-usb: will use the device's hardware PID filter (table count: 8). [ 7.520169] alloc irq_desc for 19 on node 0 [ 7.520172] alloc kstat_irqs on node 0 [ 7.520179] ohci1394 0000:0d:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 7.521232] DVB: registering new adapter (Pinnacle PCTV 310e) [ 7.550313] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 7.550366] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.572187] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[d7104000-d71047ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 7.603026] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [ 7.653995] tuner-simple 0-0061: creating new instance [ 7.654001] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 7.654104] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input11 [ 7.654143] dvb-usb: schedule remote query interval to 100 msecs. [ 7.654145] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [ 7.672039] usbcore: registered new interface driver dvb_usb_m920x [ 7.872463] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12 [ 8.153759] Adding 8018960k swap on /dev/sda3. Priority:-1 extents:1 across:8018960k [ 8.663381] device-mapper: uevent: version 1.0.3 [ 8.663888] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 8.834378] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0021e9fffec13d3a] [ 8.994385] loop: module loaded [ 10.651475] fuse init (API version 7.12) [ 11.241724] type=1505 audit(1277731817.056:2): operation="profile_load" pid=1076 name=/bin/ping [ 11.266586] type=1505 audit(1277731817.081:3): operation="profile_load" pid=1077 name=/sbin/klogd [ 11.311597] type=1505 audit(1277731817.126:4): operation="profile_load" pid=1078 name=/sbin/syslog-ng [ 11.358001] type=1505 audit(1277731817.172:5): operation="profile_load" pid=1079 name=/sbin/syslogd [ 11.407985] type=1505 audit(1277731817.222:6): operation="profile_load" pid=1080 name=/usr/sbin/avahi-daemon [ 11.450776] type=1505 audit(1277731817.265:7): operation="profile_load" pid=1081 name=/usr/sbin/identd [ 11.501137] type=1505 audit(1277731817.316:8): operation="profile_load" pid=1082 name=/usr/sbin/mdnsd [ 11.551876] type=1505 audit(1277731817.366:9): operation="profile_load" pid=1083 name=/usr/sbin/nscd [ 11.616630] type=1505 audit(1277731817.431:10): operation="profile_load" pid=1084 name=/usr/sbin/ntpd [ 11.661785] type=1505 audit(1277731817.476:11): operation="profile_load" pid=1085 name=/usr/sbin/traceroute [ 12.352674] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.521853] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.555934] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 24.296099] CE: hpet increasing min_delta_ns to 15000 nsec [ 24.725046] CE: hpet increasing min_delta_ns to 22500 nsec [ 25.647049] CE: hpet increasing min_delta_ns to 33750 nsec [ 26.127784] Bluetooth: L2CAP ver 2.13 [ 26.127789] Bluetooth: L2CAP socket layer initialized [ 26.177297] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.177304] Bluetooth: BNEP filters: protocol multicast [ 26.571963] Bridge firewalling registered [ 26.610863] Bluetooth: SCO (Voice Link) ver 0.6 [ 26.610869] Bluetooth: SCO socket layer initialized [ 26.745701] Bluetooth: RFCOMM TTY layer initialized [ 26.745708] Bluetooth: RFCOMM socket layer initialized [ 26.745712] Bluetooth: RFCOMM ver 1.11 [ 30.188338] sky2 eth0: enabling interface [ 30.188851] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.298601] NET: Registered protocol family 17 [ 30.763646] applesmc: light sensor data length set to 6 [ 31.870777] sky2 eth0: Link is up at 100 Mbps, half duplex, flow control rx [ 31.873653] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.335154] bootsplash: status on console 0 changed to on [ 33.909413] RPC: Registered udp transport module. [ 33.909423] RPC: Registered tcp transport module. [ 33.918461] Slow work thread pool: Starting up [ 33.918536] Slow work thread pool: Ready [ 33.918576] FS-Cache: Loaded [ 33.933663] FS-Cache: Netfs 'nfs' registered for caching [ 40.245059] eth1: no IPv6 routers present [ 42.141031] eth0: no IPv6 routers present [ 57.135362] CE: hpet increasing min_delta_ns to 50624 nsec [ 803.781454] saa7130/34: v4l2 driver version 0.2.15 loaded [ 845.313264] saa7130/34: v4l2 driver version 0.2.15 loaded [ 956.127249] saa7130/34: v4l2 driver version 0.2.15 loaded [ 970.132838] usb 5-1.3: USB disconnect, address 5 [ 970.141219] tuner-simple 0-0061: destroying instance [ 970.141387] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [ 975.838200] usb 5-1: USB disconnect, address 2 [ 975.838209] usb 5-1.1: USB disconnect, address 3 [ 975.838214] usb 5-1.1.1: USB disconnect, address 6 [ 975.838218] usb 5-1.1.1.1: USB disconnect, address 7 [ 975.842997] usb 5-1.2: USB disconnect, address 4 [ 976.069127] usb 5-1: new full speed USB device using uhci_hcd and address 8 [ 976.201804] usb 5-1: not running at top speed; connect to a high speed hub [ 976.221808] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608 [ 976.221821] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 976.221832] usb 5-1: Product: USB2.0 Hub [ 976.221940] usb 5-1: configuration #1 chosen from 1 choice [ 976.225855] hub 5-1:1.0: USB hub found [ 976.227877] hub 5-1:1.0: 4 ports detected [ 976.511775] usb 5-1.1: new full speed USB device using uhci_hcd and address 9 [ 976.604871] usb 5-1.1: not running at top speed; connect to a high speed hub [ 976.611775] usb 5-1.1: New USB device found, idVendor=0424, idProduct=2502 [ 976.611783] usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 976.611900] usb 5-1.1: configuration #1 chosen from 1 choice [ 976.613808] hub 5-1.1:1.0: USB hub found [ 976.614774] hub 5-1.1:1.0: 2 ports detected [ 976.690802] usb 5-1.2: new low speed USB device using uhci_hcd and address 10 [ 976.818799] usb 5-1.2: New USB device found, idVendor=046d, idProduct=c505 [ 976.818813] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 976.818824] usb 5-1.2: Product: USB Receiver [ 976.818832] usb 5-1.2: Manufacturer: Logitech [ 976.818953] usb 5-1.2: configuration #1 chosen from 1 choice [ 976.836079] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input13 [ 976.836159] generic-usb 0003:046D:C505.0006: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 [ 976.869277] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input14 [ 976.869359] generic-usb 0003:046D:C505.0007: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 [ 976.936796] usb 5-1.3: new full speed USB device using uhci_hcd and address 11 [ 977.029797] usb 5-1.3: not running at top speed; connect to a high speed hub [ 977.058794] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [ 977.058807] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 977.058818] usb 5-1.3: Product: Pinnacle PCTV [ 977.058826] usb 5-1.3: SerialNumber: 000009001167 [ 977.058915] usb 5-1.3: configuration #1 chosen from 1 choice [ 977.060830] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [ 977.060863] dvb-usb: will use the device's hardware PID filter (table count: 8). [ 977.062986] DVB: registering new adapter (Pinnacle PCTV 310e) [ 977.069257] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [ 977.071756] tuner-simple 0-0061: creating new instance [ 977.071764] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 977.071828] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input15 [ 977.071876] dvb-usb: schedule remote query interval to 100 msecs. [ 977.071883] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [ 977.173760] usb 5-1.1.1: new full speed USB device using uhci_hcd and address 12 [ 977.278762] usb 5-1.1.1: not running at top speed; connect to a high speed hub [ 977.286754] usb 5-1.1.1: New USB device found, idVendor=0424, idProduct=2602 [ 977.286761] usb 5-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 977.286863] usb 5-1.1.1: configuration #1 chosen from 1 choice [ 977.289792] hub 5-1.1.1:1.0: USB hub found [ 977.291835] hub 5-1.1.1:1.0: 4 ports detected [ 977.581761] usb 5-1.1.1.1: new full speed USB device using uhci_hcd and address 13 [ 977.706753] usb 5-1.1.1.1: not running at top speed; connect to a high speed hub [ 977.790750] usb 5-1.1.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 977.790757] usb 5-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 977.790763] usb 5-1.1.1.1: Product: Flash Card Reader [ 977.790767] usb 5-1.1.1.1: Manufacturer: Generic [ 977.790771] usb 5-1.1.1.1: SerialNumber: 071005102750 [ 977.790889] usb 5-1.1.1.1: configuration #1 chosen from 1 choice [ 977.802229] scsi5 : SCSI emulation for USB Mass Storage devices [ 977.802894] usb-storage: device found at 13 [ 977.802896] usb-storage: waiting for device to settle before scanning [ 978.812814] scsi 5:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 978.813019] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 978.821793] scsi 5:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 978.821940] sd 5:0:0:1: Attached scsi generic sg3 type 0 [ 978.831782] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 978.932822] usb-storage: device scan complete [ 978.932848] sd 5:0:0:1: [sdc] Attached SCSI removable disk [ 1254.570203] ACPI: EC: GPE storm detected, transactions will use polling mode [ 1687.184774] usb 5-1.3: USB disconnect, address 11 [ 1687.193665] tuner-simple 0-0061: destroying instance [ 1687.193865] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [ 1687.369738] usb 5-1.3: new full speed USB device using uhci_hcd and address 14 [ 1687.462780] usb 5-1.3: not running at top speed; connect to a high speed hub [ 1687.490803] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [ 1687.490810] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 1687.490816] usb 5-1.3: Product: Pinnacle PCTV [ 1687.490820] usb 5-1.3: SerialNumber: 000009001167 [ 1687.490935] usb 5-1.3: configuration #1 chosen from 1 choice [ 1687.494600] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [ 1687.494634] dvb-usb: will use the device's hardware PID filter (table count: 8). [ 1687.496067] DVB: registering new adapter (Pinnacle PCTV 310e) [ 1687.501812] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [ 1687.504236] tuner-simple 0-0061: creating new instance [ 1687.504245] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 1687.504313] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input16 [ 1687.504364] dvb-usb: schedule remote query interval to 100 msecs. [ 1687.504370] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [ 1688.729771] m920x_read = error: -71 [ 1688.729785] dvb-usb: error while querying for an remote control event. [ 1688.830756] m920x_read = error: -71 [ 1688.830764] dvb-usb: error while querying for an remote control event. [ 1688.848780] usb 5-1.3: USB disconnect, address 14 [ 1688.857225] tuner-simple 0-0061: destroying instance [ 1688.857393] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [ 1695.507729] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.508734] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.509724] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.510729] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.511740] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.511751] hub 5-1.1.1:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 1695.512738] hub 5-1.1.1:1.0: cannot disable port 1 (err = -71) [ 1695.513730] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.514734] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.515724] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.516723] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.517732] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.517744] hub 5-1.1.1:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 1695.518727] hub 5-1.1.1:1.0: cannot disable port 1 (err = -71) [ 1695.519733] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.520733] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.521721] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.522732] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.523732] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.523744] hub 5-1.1.1:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 1695.524728] hub 5-1.1.1:1.0: cannot disable port 1 (err = -71) [ 1695.525747] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.526729] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.527728] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.528733] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.529728] hub 5-1.1.1:1.0: cannot reset port 1 (err = -71) [ 1695.529740] hub 5-1.1.1:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 1695.530727] hub 5-1.1.1:1.0: cannot disable port 1 (err = -71) [ 1695.531733] hub 5-1.1.1:1.0: cannot disable port 1 (err = -71) [ 1695.532730] hub 5-1.1.1:1.0: hub_port_status failed (err = -71) [ 1695.750124] usb 5-1: USB disconnect, address 8 [ 1695.750134] usb 5-1.1: USB disconnect, address 9 [ 1695.750138] usb 5-1.1.1: USB disconnect, address 12 [ 1695.750143] usb 5-1.1.1.1: USB disconnect, address 13 [ 1695.756936] usb 5-1.2: USB disconnect, address 10 [ 1695.982104] usb 5-1: new full speed USB device using uhci_hcd and address 15 [ 1696.113726] usb 5-1: not running at top speed; connect to a high speed hub [ 1696.133729] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608 [ 1696.133743] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1696.133754] usb 5-1: Product: USB2.0 Hub [ 1696.133873] usb 5-1: configuration #1 chosen from 1 choice [ 1696.137732] hub 5-1:1.0: USB hub found [ 1696.140946] hub 5-1:1.0: 4 ports detected [ 1696.420725] usb 5-1.1: new full speed USB device using uhci_hcd and address 16 [ 1696.511687] usb 5-1.1: not running at top speed; connect to a high speed hub [ 1696.519692] usb 5-1.1: New USB device found, idVendor=0424, idProduct=2502 [ 1696.519703] usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1696.519821] usb 5-1.1: configuration #1 chosen from 1 choice [ 1696.522724] hub 5-1.1:1.0: USB hub found [ 1696.523690] hub 5-1.1:1.0: 2 ports detected [ 1696.594691] usb 5-1.2: new low speed USB device using uhci_hcd and address 17 [ 1696.726799] usb 5-1.2: New USB device found, idVendor=046d, idProduct=c505 [ 1696.726810] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1696.726815] usb 5-1.2: Product: USB Receiver [ 1696.726819] usb 5-1.2: Manufacturer: Logitech [ 1696.726931] usb 5-1.2: configuration #1 chosen from 1 choice [ 1696.743972] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input17 [ 1696.744297] generic-usb 0003:046D:C505.0008: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 [ 1696.777303] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input18 [ 1696.777402] generic-usb 0003:046D:C505.0009: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 [ 1696.844723] usb 5-1.3: new full speed USB device using uhci_hcd and address 18 [ 1696.937721] usb 5-1.3: not running at top speed; connect to a high speed hub [ 1696.966723] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [ 1696.966737] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 1696.966748] usb 5-1.3: Product: Pinnacle PCTV [ 1696.966756] usb 5-1.3: SerialNumber: 000009001167 [ 1696.966863] usb 5-1.3: configuration #1 chosen from 1 choice [ 1696.972778] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [ 1696.972814] dvb-usb: will use the device's hardware PID filter (table count: 8). [ 1696.974970] DVB: registering new adapter (Pinnacle PCTV 310e) [ 1696.978679] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [ 1696.980685] tuner-simple 0-0061: creating new instance [ 1696.980693] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 1696.980761] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input19 [ 1696.980809] dvb-usb: schedule remote query interval to 100 msecs. [ 1696.980815] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [ 1697.081713] usb 5-1.1.1: new full speed USB device using uhci_hcd and address 19 [ 1697.184679] usb 5-1.1.1: not running at top speed; connect to a high speed hub [ 1697.192681] usb 5-1.1.1: New USB device found, idVendor=0424, idProduct=2602 [ 1697.192688] usb 5-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1697.192809] usb 5-1.1.1: configuration #1 chosen from 1 choice [ 1697.195718] hub 5-1.1.1:1.0: USB hub found [ 1697.197695] hub 5-1.1.1:1.0: 4 ports detected [ 1697.488721] usb 5-1.1.1.1: new full speed USB device using uhci_hcd and address 20 [ 1697.615753] usb 5-1.1.1.1: not running at top speed; connect to a high speed hub [ 1697.702710] usb 5-1.1.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 1697.702722] usb 5-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1697.702728] usb 5-1.1.1.1: Product: Flash Card Reader [ 1697.702732] usb 5-1.1.1.1: Manufacturer: Generic [ 1697.702736] usb 5-1.1.1.1: SerialNumber: 071005102750 [ 1697.702886] usb 5-1.1.1.1: configuration #1 chosen from 1 choice [ 1697.710533] scsi6 : SCSI emulation for USB Mass Storage devices [ 1697.710676] usb-storage: device found at 20 [ 1697.710678] usb-storage: waiting for device to settle before scanning [ 1698.720754] scsi 6:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 1698.720953] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 1698.731717] scsi 6:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 1698.731877] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 1698.736819] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 1698.791710] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 1698.801727] usb-storage: device scan complete [ 2064.139117] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=92.55.83.250 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=18159 DF PROTO=TCP SPT=34658 DPT=37418 WINDOW=46 RES=0x00 ACK FIN URGP=0 [ 2067.106785] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=84.90.216.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=45487 DPT=11811 WINDOW=0 RES=0x00 RST URGP=0 [ 2067.128084] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=84.90.216.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=45487 DPT=11811 WINDOW=0 RES=0x00 RST URGP=0 [ 2067.135889] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=84.90.216.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=45487 DPT=11811 WINDOW=0 RES=0x00 RST URGP=0 [ 2067.143646] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=84.90.216.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=45487 DPT=11811 WINDOW=0 RES=0x00 RST URGP=0 [ 2085.883276] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=89.152.27.80 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=48044 DF PROTO=TCP SPT=55508 DPT=26392 WINDOW=5840 RES=0x00 ACK FIN URGP=0 OPT (0101080A001B401B001B3BD6) [ 2160.139118] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=92.55.83.250 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=18160 DF PROTO=TCP SPT=34658 DPT=37418 WINDOW=46 RES=0x00 ACK FIN URGP=0 [ 2171.515282] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=89.152.27.80 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=48045 DF PROTO=TCP SPT=55508 DPT=26392 WINDOW=5840 RES=0x00 ACK FIN URGP=0 OPT (0101080A001C8E9B001B3BD6) [ 2556.646363] m920x_read = error: -71 [ 2556.646373] dvb-usb: error while querying for an remote control event. [ 2556.682351] usb 5-1.3: USB disconnect, address 18 [ 2556.688719] tuner-simple 0-0061: destroying instance [ 2556.688898] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [ 2557.141366] usb 5-1.3: new full speed USB device using uhci_hcd and address 21 [ 2557.235371] usb 5-1.3: not running at top speed; connect to a high speed hub [ 2557.264370] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [ 2557.264387] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 2557.264393] usb 5-1.3: Product: Pinnacle PCTV [ 2557.264397] usb 5-1.3: SerialNumber: 000009001167 [ 2557.264516] usb 5-1.3: configuration #1 chosen from 1 choice [ 2557.267475] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [ 2557.267508] dvb-usb: will use the device's hardware PID filter (table count: 8). [ 2557.269572] DVB: registering new adapter (Pinnacle PCTV 310e) [ 2557.273355] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [ 2557.275363] tuner-simple 0-0061: creating new instance [ 2557.275376] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 2557.275456] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input20 [ 2557.275612] dvb-usb: schedule remote query interval to 100 msecs. [ 2557.275618] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [ 3019.129575] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=212.170.164.208 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=39692 DPT=61063 WINDOW=0 RES=0x00 RST URGP=0 [ 3019.150299] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=212.170.164.208 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=39692 DPT=61063 WINDOW=0 RES=0x00 RST URGP=0 [ 3019.170145] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=212.170.164.208 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=39692 DPT=61063 WINDOW=0 RES=0x00 RST URGP=0 [ 3019.193486] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=212.170.164.208 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=39692 DPT=61063 WINDOW=0 RES=0x00 RST URGP=0 [ 3019.214190] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=212.170.164.208 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=39692 DPT=61063 WINDOW=0 RES=0x00 RST URGP=0 [ 3493.202221] applesmc: wait status failed: 4 != 0 [ 3582.804738] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=189.29.201.148 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=40209 DPT=61827 WINDOW=0 RES=0x00 RST URGP=0 [ 3582.846634] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=189.29.201.148 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=40209 DPT=61827 WINDOW=0 RES=0x00 RST URGP=0 [ 3582.880441] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=189.29.201.148 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=40209 DPT=61827 WINDOW=0 RES=0x00 RST URGP=0 [ 3582.920389] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=189.29.201.148 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=40209 DPT=61827 WINDOW=0 RES=0x00 RST URGP=0 [ 3582.942185] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=189.29.201.148 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=40209 DPT=61827 WINDOW=0 RES=0x00 RST URGP=0 [ 4050.608464] m920x_read = error: -71 [ 4050.608479] dvb-usb: error while querying for an remote control event. [ 4050.704219] hub 5-0:1.0: port 1 disabled by hub (EMI?), re-enabling... [ 4050.704232] usb 5-1: USB disconnect, address 15 [ 4050.704237] usb 5-1.1: USB disconnect, address 16 [ 4050.704241] usb 5-1.1.1: USB disconnect, address 19 [ 4050.704245] usb 5-1.1.1.1: USB disconnect, address 20 [ 4050.707596] usb 5-1.2: USB disconnect, address 17 [ 4050.708547] m920x_read = error: -19 [ 4050.708553] dvb-usb: error while querying for an remote control event. [ 4050.723601] usb 5-1.3: USB disconnect, address 21 [ 4050.729399] tuner-simple 0-0061: destroying instance [ 4050.729676] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [ 4050.937170] usb 5-1: new full speed USB device using uhci_hcd and address 22 [ 4051.069484] usb 5-1: not running at top speed; connect to a high speed hub [ 4051.089433] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608 [ 4051.089440] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4051.089445] usb 5-1: Product: USB2.0 Hub [ 4051.089559] usb 5-1: configuration #1 chosen from 1 choice [ 4051.092482] hub 5-1:1.0: USB hub found [ 4051.094450] hub 5-1:1.0: 4 ports detected [ 4051.374444] usb 5-1.1: new full speed USB device using uhci_hcd and address 23 [ 4051.464413] usb 5-1.1: not running at top speed; connect to a high speed hub [ 4051.472426] usb 5-1.1: New USB device found, idVendor=0424, idProduct=2502 [ 4051.472433] usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4051.472552] usb 5-1.1: configuration #1 chosen from 1 choice [ 4051.475443] hub 5-1.1:1.0: USB hub found [ 4051.476412] hub 5-1.1:1.0: 2 ports detected [ 4051.550417] usb 5-1.2: new low speed USB device using uhci_hcd and address 24 [ 4051.683456] usb 5-1.2: New USB device found, idVendor=046d, idProduct=c505 [ 4051.683474] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4051.683486] usb 5-1.2: Product: USB Receiver [ 4051.683494] usb 5-1.2: Manufacturer: Logitech [ 4051.683626] usb 5-1.2: configuration #1 chosen from 1 choice [ 4051.700733] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input21 [ 4051.700815] generic-usb 0003:046D:C505.000A: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 [ 4051.735938] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input22 [ 4051.736297] generic-usb 0003:046D:C505.000B: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 [ 4051.803444] usb 5-1.3: new full speed USB device using uhci_hcd and address 25 [ 4051.898460] usb 5-1.3: not running at top speed; connect to a high speed hub [ 4051.927434] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [ 4051.927445] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 4051.927451] usb 5-1.3: Product: Pinnacle PCTV [ 4051.927455] usb 5-1.3: SerialNumber: 000009001167 [ 4051.927576] usb 5-1.3: configuration #1 chosen from 1 choice [ 4051.932576] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [ 4051.932614] dvb-usb: will use the device's hardware PID filter (table count: 8). [ 4051.934662] DVB: registering new adapter (Pinnacle PCTV 310e) [ 4051.941034] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [ 4051.943499] tuner-simple 0-0061: creating new instance [ 4051.943507] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 4051.943574] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input23 [ 4051.943621] dvb-usb: schedule remote query interval to 100 msecs. [ 4051.943628] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [ 4052.054558] usb 5-1.1.1: new full speed USB device using uhci_hcd and address 26 [ 4052.160436] usb 5-1.1.1: not running at top speed; connect to a high speed hub [ 4052.166466] usb 5-1.1.1: New USB device found, idVendor=0424, idProduct=2602 [ 4052.166479] usb 5-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4052.166609] usb 5-1.1.1: configuration #1 chosen from 1 choice [ 4052.169535] hub 5-1.1.1:1.0: USB hub found [ 4052.171420] hub 5-1.1.1:1.0: 4 ports detected [ 4052.464432] usb 5-1.1.1.1: new full speed USB device using uhci_hcd and address 27 [ 4052.589433] usb 5-1.1.1.1: not running at top speed; connect to a high speed hub [ 4052.675481] usb 5-1.1.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 4052.675493] usb 5-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4052.675498] usb 5-1.1.1.1: Product: Flash Card Reader [ 4052.675503] usb 5-1.1.1.1: Manufacturer: Generic [ 4052.675507] usb 5-1.1.1.1: SerialNumber: 071005102750 [ 4052.675639] usb 5-1.1.1.1: configuration #1 chosen from 1 choice [ 4052.678564] scsi7 : SCSI emulation for USB Mass Storage devices [ 4052.684616] usb-storage: device found at 27 [ 4052.684619] usb-storage: waiting for device to settle before scanning [ 4053.695596] scsi 7:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 4053.695796] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 4053.705092] scsi 7:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 4053.705274] sd 7:0:0:1: Attached scsi generic sg3 type 0 [ 4053.795440] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 4053.801560] sd 7:0:0:1: [sdc] Attached SCSI removable disk [ 4053.801799] usb-storage: device scan complete [ 4189.267527] m920x_read = error: -71 [ 4189.267540] dvb-usb: error while querying for an remote control event. [ 4189.312525] usb 5-1.3: USB disconnect, address 25 [ 4189.325284] tuner-simple 0-0061: destroying instance [ 4189.325458] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [ 4195.545202] usb 5-1: USB disconnect, address 22 [ 4195.545212] usb 5-1.1: USB disconnect, address 23 [ 4195.545216] usb 5-1.1.1: USB disconnect, address 26 [ 4195.545220] usb 5-1.1.1.1: USB disconnect, address 27 [ 4195.552867] usb 5-1.2: USB disconnect, address 24 [ 4195.788058] usb 5-1: new full speed USB device using uhci_hcd and address 28 [ 4195.921678] usb 5-1: not running at top speed; connect to a high speed hub [ 4195.943676] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608 [ 4195.943687] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4195.943693] usb 5-1: Product: USB2.0 Hub [ 4195.943813] usb 5-1: configuration #1 chosen from 1 choice [ 4195.946536] hub 5-1:1.0: USB hub found [ 4195.948494] hub 5-1:1.0: 4 ports detected [ 4196.228674] usb 5-1.1: new full speed USB device using uhci_hcd and address 29 [ 4196.317489] usb 5-1.1: not running at top speed; connect to a high speed hub [ 4196.324677] usb 5-1.1: New USB device found, idVendor=0424, idProduct=2502 [ 4196.324683] usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4196.324795] usb 5-1.1: configuration #1 chosen from 1 choice [ 4196.328793] hub 5-1.1:1.0: USB hub found [ 4196.329530] hub 5-1.1:1.0: 2 ports detected [ 4196.401678] usb 5-1.2: new low speed USB device using uhci_hcd and address 30 [ 4196.529678] usb 5-1.2: New USB device found, idVendor=046d, idProduct=c505 [ 4196.529685] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4196.529690] usb 5-1.2: Product: USB Receiver [ 4196.529694] usb 5-1.2: Manufacturer: Logitech [ 4196.529807] usb 5-1.2: configuration #1 chosen from 1 choice [ 4196.546938] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input24 [ 4196.547195] generic-usb 0003:046D:C505.000C: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 [ 4196.580150] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input25 [ 4196.580236] generic-usb 0003:046D:C505.000D: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 [ 4196.648673] usb 5-1.3: new full speed USB device using uhci_hcd and address 31 [ 4196.742487] usb 5-1.3: not running at top speed; connect to a high speed hub [ 4196.771152] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [ 4196.771160] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 4196.771165] usb 5-1.3: Product: Pinnacle PCTV [ 4196.771169] usb 5-1.3: SerialNumber: 000009001167 [ 4196.771246] usb 5-1.3: configuration #1 chosen from 1 choice [ 4196.772702] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [ 4196.772735] dvb-usb: will use the device's hardware PID filter (table count: 8). [ 4196.775308] DVB: registering new adapter (Pinnacle PCTV 310e) [ 4196.781713] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [ 4196.784078] tuner-simple 0-0061: creating new instance [ 4196.784086] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 4196.784155] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input26 [ 4196.784202] dvb-usb: schedule remote query interval to 100 msecs. [ 4196.784209] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [ 4196.885426] usb 5-1.1.1: new full speed USB device using uhci_hcd and address 32 [ 4196.990467] usb 5-1.1.1: not running at top speed; connect to a high speed hub [ 4196.998653] usb 5-1.1.1: New USB device found, idVendor=0424, idProduct=2602 [ 4196.998660] usb 5-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4196.998781] usb 5-1.1.1: configuration #1 chosen from 1 choice [ 4197.004593] hub 5-1.1.1:1.0: USB hub found [ 4197.007101] hub 5-1.1.1:1.0: 4 ports detected [ 4197.298670] usb 5-1.1.1.1: new full speed USB device using uhci_hcd and address 33 [ 4197.425696] usb 5-1.1.1.1: not running at top speed; connect to a high speed hub [ 4197.510646] usb 5-1.1.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 4197.510656] usb 5-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4197.510662] usb 5-1.1.1.1: Product: Flash Card Reader [ 4197.510667] usb 5-1.1.1.1: Manufacturer: Generic [ 4197.510670] usb 5-1.1.1.1: SerialNumber: 071005102750 [ 4197.510791] usb 5-1.1.1.1: configuration #1 chosen from 1 choice [ 4197.520767] scsi8 : SCSI emulation for USB Mass Storage devices [ 4197.520925] usb-storage: device found at 33 [ 4197.520927] usb-storage: waiting for device to settle before scanning [ 4198.530430] scsi 8:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 4198.530619] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 4198.535496] scsi 8:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 4198.535655] sd 8:0:0:1: Attached scsi generic sg3 type 0 [ 4198.607479] sd 8:0:0:1: [sdc] Attached SCSI removable disk [ 4198.617478] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 4198.622600] usb-storage: device scan complete [ 4783.930302] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=113.193.34.215 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=6786 DF PROTO=TCP SPT=58886 DPT=36502 WINDOW=56 RES=0x00 ACK FIN URGP=0 [ 4879.389128] saa7146: register extension 'dvb'. [ 4879.445617] bttv: driver version 0.9.18 loaded [ 4879.445627] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 4879.485230] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4879.505538] i2c /dev entries driver [ 4879.519153] saa7146: register extension 'budget_ci dvb'. [ 4906.141634] m920x_read = error: -71 [ 4906.141648] dvb-usb: error while querying for an remote control event. [ 4906.235646] usb 5-1.3: USB disconnect, address 31 [ 4906.243209] tuner-simple 0-0061: destroying instance [ 4906.243448] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [ 4906.418640] usb 5-1.3: new full speed USB device using uhci_hcd and address 34 [ 4906.511657] usb 5-1.3: not running at top speed; connect to a high speed hub [ 4906.539639] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [ 4906.539653] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 4906.539665] usb 5-1.3: Product: Pinnacle PCTV [ 4906.539673] usb 5-1.3: SerialNumber: 000009001167 [ 4906.539799] usb 5-1.3: configuration #1 chosen from 1 choice [ 4906.541670] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [ 4906.541732] dvb-usb: will use the device's hardware PID filter (table count: 8). [ 4906.543813] DVB: registering new adapter (Pinnacle PCTV 310e) [ 4906.548176] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [ 4906.552735] tuner-simple 0-0061: creating new instance [ 4906.552745] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 4906.552825] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input27 [ 4906.552886] dvb-usb: schedule remote query interval to 100 msecs. [ 4906.552893] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [ 4906.963605] m920x_read = error: -71 [ 4906.963613] dvb-usb: error while querying for an remote control event. [ 4907.064618] m920x_read = error: -71 [ 4907.064627] dvb-usb: error while querying for an remote control event. [ 4907.154071] usb 5-1: USB disconnect, address 28 [ 4907.154080] usb 5-1.1: USB disconnect, address 29 [ 4907.154085] usb 5-1.1.1: USB disconnect, address 32 [ 4907.154089] usb 5-1.1.1.1: USB disconnect, address 33 [ 4907.159851] usb 5-1.2: USB disconnect, address 30 [ 4907.164136] m920x_read = error: -19 [ 4907.164143] dvb-usb: error while querying for an remote control event. [ 4907.177361] usb 5-1.3: USB disconnect, address 34 [ 4907.184159] tuner-simple 0-0061: destroying instance [ 4907.184388] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [ 4907.394148] usb 5-1: new full speed USB device using uhci_hcd and address 35 [ 4907.525629] usb 5-1: not running at top speed; connect to a high speed hub [ 4907.545631] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608 [ 4907.545645] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4907.545656] usb 5-1: Product: USB2.0 Hub [ 4907.545777] usb 5-1: configuration #1 chosen from 1 choice [ 4907.548643] hub 5-1:1.0: USB hub found [ 4907.550606] hub 5-1:1.0: 4 ports detected [ 4907.830629] usb 5-1.1: new full speed USB device using uhci_hcd and address 36 [ 4907.922585] usb 5-1.1: not running at top speed; connect to a high speed hub [ 4907.930585] usb 5-1.1: New USB device found, idVendor=0424, idProduct=2502 [ 4907.930593] usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4907.930712] usb 5-1.1: configuration #1 chosen from 1 choice [ 4907.933624] hub 5-1.1:1.0: USB hub found [ 4907.934586] hub 5-1.1:1.0: 2 ports detected [ 4908.006621] usb 5-1.2: new low speed USB device using uhci_hcd and address 37 [ 4908.135627] usb 5-1.2: New USB device found, idVendor=046d, idProduct=c505 [ 4908.135645] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4908.135656] usb 5-1.2: Product: USB Receiver [ 4908.135664] usb 5-1.2: Manufacturer: Logitech [ 4908.135793] usb 5-1.2: configuration #1 chosen from 1 choice [ 4908.152891] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input28 [ 4908.152976] generic-usb 0003:046D:C505.000E: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 [ 4908.186120] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input29 [ 4908.186215] generic-usb 0003:046D:C505.000F: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 [ 4908.265620] usb 5-1.1.1: new full speed USB device using uhci_hcd and address 38 [ 4908.364621] usb 5-1.1.1: not running at top speed; connect to a high speed hub [ 4908.372615] usb 5-1.1.1: New USB device found, idVendor=0424, idProduct=2602 [ 4908.372622] usb 5-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4908.372701] usb 5-1.1.1: configuration #1 chosen from 1 choice [ 4908.376513] hub 5-1.1.1:1.0: USB hub found [ 4908.377916] hub 5-1.1.1:1.0: 4 ports detected [ 4908.668581] usb 5-1.1.1.1: new full speed USB device using uhci_hcd and address 39 [ 4908.792578] usb 5-1.1.1.1: not running at top speed; connect to a high speed hub [ 4908.825575] usb 5-1.1.1.1: string descriptor 0 read error: -71 [ 4908.825583] usb 5-1.1.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 4908.825588] usb 5-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4908.825714] usb 5-1.1.1.1: configuration #1 chosen from 1 choice [ 4908.829584] usb 5-1.1.1.1: can't set config #1, error -71 [ 4908.831659] hub 5-1.1.1:1.0: hub_port_status failed (err = -71) [ 4909.076084] usb 5-1: USB disconnect, address 35 [ 4909.076094] usb 5-1.1: USB disconnect, address 36 [ 4909.076099] usb 5-1.1.1: USB disconnect, address 38 [ 4909.076103] usb 5-1.1.1.1: USB disconnect, address 39 [ 4909.078804] usb 5-1.2: USB disconnect, address 37 [ 4909.299159] usb 5-1: new full speed USB device using uhci_hcd and address 40 [ 4909.430614] usb 5-1: not running at top speed; connect to a high speed hub [ 4909.450622] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608 [ 4909.450635] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4909.450646] usb 5-1: Product: USB2.0 Hub [ 4909.450769] usb 5-1: configuration #1 chosen from 1 choice [ 4909.454124] hub 5-1:1.0: USB hub found [ 4909.455678] hub 5-1:1.0: 4 ports detected [ 4909.735612] usb 5-1.1: new full speed USB device using uhci_hcd and address 41 [ 4909.824611] usb 5-1.1: not running at top speed; connect to a high speed hub [ 4909.831610] usb 5-1.1: New USB device found, idVendor=0424, idProduct=2502 [ 4909.831624] usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4909.831757] usb 5-1.1: configuration #1 chosen from 1 choice [ 4909.835754] hub 5-1.1:1.0: USB hub found [ 4909.837862] hub 5-1.1:1.0: 2 ports detected [ 4909.909611] usb 5-1.2: new low speed USB device using uhci_hcd and address 42 [ 4910.037619] usb 5-1.2: New USB device found, idVendor=046d, idProduct=c505 [ 4910.037634] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4910.037645] usb 5-1.2: Product: USB Receiver [ 4910.037653] usb 5-1.2: Manufacturer: Logitech [ 4910.037778] usb 5-1.2: configuration #1 chosen from 1 choice [ 4910.055026] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input30 [ 4910.055115] generic-usb 0003:046D:C505.0010: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 [ 4910.088090] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input31 [ 4910.088178] generic-usb 0003:046D:C505.0011: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 [ 4910.155608] usb 5-1.3: new full speed USB device using uhci_hcd and address 43 [ 4910.249602] usb 5-1.3: not running at top speed; connect to a high speed hub [ 4910.277612] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [ 4910.277626] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 4910.277637] usb 5-1.3: Product: Pinnacle PCTV [ 4910.277645] usb 5-1.3: SerialNumber: 000009001167 [ 4910.277740] usb 5-1.3: configuration #1 chosen from 1 choice [ 4910.280645] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [ 4910.280708] dvb-usb: will use the device's hardware PID filter (table count: 8). [ 4910.283688] DVB: registering new adapter (Pinnacle PCTV 310e) [ 4910.289583] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [ 4910.291576] tuner-simple 0-0061: creating new instance [ 4910.291584] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 4910.291659] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input32 [ 4910.291712] dvb-usb: schedule remote query interval to 100 msecs. [ 4910.291719] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [ 4910.390593] usb 5-1.1.1: new full speed USB device using uhci_hcd and address 44 [ 4910.495571] usb 5-1.1.1: not running at top speed; connect to a high speed hub [ 4910.503567] usb 5-1.1.1: New USB device found, idVendor=0424, idProduct=2602 [ 4910.503575] usb 5-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4910.503710] usb 5-1.1.1: configuration #1 chosen from 1 choice [ 4910.520881] hub 5-1.1.1:1.0: USB hub found [ 4910.522807] hub 5-1.1.1:1.0: 4 ports detected [ 4910.814808] usb 5-1.1.1.1: new full speed USB device using uhci_hcd and address 45 [ 4910.939619] usb 5-1.1.1.1: not running at top speed; connect to a high speed hub [ 4911.027807] usb 5-1.1.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 4911.027816] usb 5-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4911.027822] usb 5-1.1.1.1: Product: Flash Card Reader [ 4911.027827] usb 5-1.1.1.1: Manufacturer: Generic [ 4911.027831] usb 5-1.1.1.1: SerialNumber: 071005102750 [ 4911.027965] usb 5-1.1.1.1: configuration #1 chosen from 1 choice [ 4911.029982] scsi9 : SCSI emulation for USB Mass Storage devices [ 4911.030087] usb-storage: device found at 45 [ 4911.030089] usb-storage: waiting for device to settle before scanning [ 4912.039607] scsi 9:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 4912.039813] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 4912.044730] scsi 9:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 4912.044883] sd 9:0:0:1: Attached scsi generic sg3 type 0 [ 4912.104600] sd 9:0:0:0: [sdb] Attached SCSI removable disk [ 4912.129587] sd 9:0:0:1: [sdc] Attached SCSI removable disk [ 4912.129808] usb-storage: device scan complete [ 5856.815980] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=207.98.216.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58248 DF PROTO=TCP SPT=59124 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A0054CA4F1553C155) [ 5856.833028] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=207.98.216.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=63122 DF PROTO=TCP SPT=59111 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0054CA601553B295) [ 5857.323154] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=207.98.216.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=63123 DF PROTO=TCP SPT=59111 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0054CC4B1553B295) [ 5857.619293] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=207.98.216.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58249 DF PROTO=TCP SPT=59124 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A0054CD731553C155) [ 5858.305122] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=207.98.216.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=63124 DF PROTO=TCP SPT=59111 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0054D0211553B295) [ 5881.739155] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=207.98.216.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58253 DF PROTO=TCP SPT=59124 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A00552BAB1553C155) [ 5907.467098] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=207.98.216.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58254 DF PROTO=TCP SPT=59124 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A0055902B1553C155) [ 5919.189157] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=207.98.216.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=63129 DF PROTO=TCP SPT=59111 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0055BDF51553B295) [ 5958.923093] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=207.98.216.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58255 DF PROTO=TCP SPT=59124 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A0056592B1553C155) [ 5982.037291] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=207.98.216.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=63130 DF PROTO=TCP SPT=59111 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0056B3751553B295) [ 6061.835130] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=207.98.216.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58256 DF PROTO=TCP SPT=59124 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A0057EB2B1553C155) [ 6591.974018] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=22505 DF PROTO=TCP SPT=52906 DPT=80 WINDOW=332 RES=0x00 ACK FIN URGP=0 OPT (0101080A006002063C80A4E8) [ 6592.234280] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=22506 DF PROTO=TCP SPT=52906 DPT=80 WINDOW=332 RES=0x00 ACK FIN URGP=0 OPT (0101080A0060030A3C80A4E8) [ 6592.754274] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=22507 DF PROTO=TCP SPT=52906 DPT=80 WINDOW=332 RES=0x00 ACK FIN URGP=0 OPT (0101080A006005123C80A4E8) [ 6593.794292] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=22508 DF PROTO=TCP SPT=52906 DPT=80 WINDOW=332 RES=0x00 ACK FIN URGP=0 OPT (0101080A006009223C80A4E8) [ 6595.874133] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=22509 DF PROTO=TCP SPT=52906 DPT=80 WINDOW=332 RES=0x00 ACK FIN URGP=0 OPT (0101080A006011423C80A4E8) [ 6624.994036] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=22512 DF PROTO=TCP SPT=52906 DPT=80 WINDOW=332 RES=0x00 ACK FIN URGP=0 OPT (0101080A006083023C80A4E8) [ 6658.274097] SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.12.56 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=22513 DF PROTO=TCP SPT=52906 DPT=80 WINDOW=332 RES=0x00 ACK FIN URGP=0 OPT (0101080A006105023C80A4E8) [ 8106.045873] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 8834.103434] usbcore: registered new interface driver em28xx [ 8834.103446] em28xx driver loaded [ 8919.137757] usb 5-1.3: USB disconnect, address 43 [ 8919.143634] tuner-simple 0-0061: destroying instance [ 8919.143898] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [ 8919.320755] usb 5-1.3: new full speed USB device using uhci_hcd and address 46 [ 8919.799140] usb 5-1.3: device not accepting address 46, error -71 [ 8919.815741] hub 5-1:1.0: unable to enumerate USB device on port 3 [ 8922.105177] usb 5-1: USB disconnect, address 40 [ 8922.105196] usb 5-1.1: USB disconnect, address 41 [ 8922.105200] usb 5-1.1.1: USB disconnect, address 44 [ 8922.105205] usb 5-1.1.1.1: USB disconnect, address 45 [ 8922.115057] usb 5-1.2: USB disconnect, address 42 [ 8922.343126] usb 5-1: new full speed USB device using uhci_hcd and address 48 [ 8922.474727] usb 5-1: not running at top speed; connect to a high speed hub [ 8922.494729] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608 [ 8922.494742] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 8922.494754] usb 5-1: Product: USB2.0 Hub [ 8922.494859] usb 5-1: configuration #1 chosen from 1 choice [ 8922.498852] hub 5-1:1.0: USB hub found [ 8922.500944] hub 5-1:1.0: 4 ports detected [ 8922.780715] usb 5-1.1: new full speed USB device using uhci_hcd and address 49 [ 8922.881048] usb 5-1.1: not running at top speed; connect to a high speed hub [ 8922.887745] usb 5-1.1: New USB device found, idVendor=0424, idProduct=2502 [ 8922.887755] usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8922.888254] usb 5-1.1: configuration #1 chosen from 1 choice [ 8922.893135] hub 5-1.1:1.0: USB hub found [ 8922.894852] hub 5-1.1:1.0: 2 ports detected [ 8922.967710] usb 5-1.2: new low speed USB device using uhci_hcd and address 50 [ 8923.096733] usb 5-1.2: New USB device found, idVendor=046d, idProduct=c505 [ 8923.096751] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8923.096762] usb 5-1.2: Product: USB Receiver [ 8923.096770] usb 5-1.2: Manufacturer: Logitech [ 8923.096896] usb 5-1.2: configuration #1 chosen from 1 choice [ 8923.113996] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input33 [ 8923.114237] generic-usb 0003:046D:C505.0012: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 [ 8923.147198] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input34 [ 8923.147293] generic-usb 0003:046D:C505.0013: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 [ 8923.214727] usb 5-1.3: new full speed USB device using uhci_hcd and address 51 [ 8923.306727] usb 5-1.3: not running at top speed; connect to a high speed hub [ 8923.335724] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [ 8923.335738] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 8923.335749] usb 5-1.3: Product: Pinnacle PCTV [ 8923.335757] usb 5-1.3: SerialNumber: 000009001167 [ 8923.335836] usb 5-1.3: configuration #1 chosen from 1 choice [ 8923.337803] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [ 8923.337861] dvb-usb: will use the device's hardware PID filter (table count: 8). [ 8923.345207] DVB: registering new adapter (Pinnacle PCTV 310e) [ 8923.350754] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [ 8923.352710] tuner-simple 0-0061: creating new instance [ 8923.352716] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 8923.352786] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input35 [ 8923.352832] dvb-usb: schedule remote query interval to 100 msecs. [ 8923.352838] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [ 8923.447728] usb 5-1.1.1: new full speed USB device using uhci_hcd and address 52 [ 8923.552714] usb 5-1.1.1: not running at top speed; connect to a high speed hub [ 8923.559680] usb 5-1.1.1: New USB device found, idVendor=0424, idProduct=2602 [ 8923.559687] usb 5-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8923.559813] usb 5-1.1.1: configuration #1 chosen from 1 choice [ 8923.562715] hub 5-1.1.1:1.0: USB hub found [ 8923.563678] hub 5-1.1.1:1.0: 4 ports detected [ 8923.857729] usb 5-1.1.1.1: new full speed USB device using uhci_hcd and address 53 [ 8923.980677] usb 5-1.1.1.1: not running at top speed; connect to a high speed hub [ 8924.065692] usb 5-1.1.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 8924.065703] usb 5-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8924.065709] usb 5-1.1.1.1: Product: Flash Card Reader [ 8924.065713] usb 5-1.1.1.1: Manufacturer: Generic [ 8924.065717] usb 5-1.1.1.1: SerialNumber: 071005102750 [ 8924.065846] usb 5-1.1.1.1: configuration #1 chosen from 1 choice [ 8924.074730] scsi10 : SCSI emulation for USB Mass Storage devices [ 8924.075429] usb-storage: device found at 53 [ 8924.075431] usb-storage: waiting for device to settle before scanning [ 8925.086710] scsi 10:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 8925.086913] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 8925.098700] scsi 10:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 8925.098860] sd 10:0:0:1: Attached scsi generic sg3 type 0 [ 8925.103723] sd 10:0:0:0: [sdb] Attached SCSI removable disk [ 8925.165696] sd 10:0:0:1: [sdc] Attached SCSI removable disk [ 8925.202754] usb-storage: device scan complete [10850.851581] m920x_read = error: -71 [10850.851592] dvb-usb: error while querying for an remote control event. [10850.901570] usb 5-1.3: USB disconnect, address 51 [10850.907486] tuner-simple 0-0061: destroying instance [10850.907721] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [10851.083816] usb 5-1.3: new full speed USB device using uhci_hcd and address 54 [10851.182841] usb 5-1.3: not running at top speed; connect to a high speed hub [10851.209778] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [10851.209784] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [10851.209790] usb 5-1.3: Product: Pinnacle PCTV [10851.209794] usb 5-1.3: SerialNumber: 000009001167 [10851.209917] usb 5-1.3: configuration #1 chosen from 1 choice [10851.212604] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [10851.212667] dvb-usb: will use the device's hardware PID filter (table count: 8). [10851.214787] DVB: registering new adapter (Pinnacle PCTV 310e) [10851.220886] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [10851.222656] tuner-simple 0-0061: creating new instance [10851.222664] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [10851.222732] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input36 [10851.222776] dvb-usb: schedule remote query interval to 100 msecs. [10851.222782] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [10905.685234] usb 5-1.3: USB disconnect, address 54 [10905.693768] tuner-simple 0-0061: destroying instance [10905.693997] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [10908.115184] usb 5-1: USB disconnect, address 48 [10908.115201] usb 5-1.1: USB disconnect, address 49 [10908.115205] usb 5-1.1.1: USB disconnect, address 52 [10908.115210] usb 5-1.1.1.1: USB disconnect, address 53 [10908.125088] usb 5-1.2: USB disconnect, address 50 [10908.349133] usb 5-1: new full speed USB device using uhci_hcd and address 55 [10908.532216] usb 5-1: not running at top speed; connect to a high speed hub [10908.552221] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608 [10908.552234] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [10908.552245] usb 5-1: Product: USB2.0 Hub [10908.552362] usb 5-1: configuration #1 chosen from 1 choice [10908.556419] hub 5-1:1.0: USB hub found [10908.558208] hub 5-1:1.0: 4 ports detected [10908.838215] usb 5-1.1: new full speed USB device using uhci_hcd and address 56 [10908.928220] usb 5-1.1: not running at top speed; connect to a high speed hub [10908.935213] usb 5-1.1: New USB device found, idVendor=0424, idProduct=2502 [10908.935226] usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [10908.935360] usb 5-1.1: configuration #1 chosen from 1 choice [10908.938208] hub 5-1.1:1.0: USB hub found [10908.939175] hub 5-1.1:1.0: 2 ports detected [10909.011216] usb 5-1.2: new low speed USB device using uhci_hcd and address 57 [10909.139217] usb 5-1.2: New USB device found, idVendor=046d, idProduct=c505 [10909.139231] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [10909.139242] usb 5-1.2: Product: USB Receiver [10909.139250] usb 5-1.2: Manufacturer: Logitech [10909.139379] usb 5-1.2: configuration #1 chosen from 1 choice [10909.156487] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input37 [10909.156574] generic-usb 0003:046D:C505.0014: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 [10909.189704] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input38 [10909.189798] generic-usb 0003:046D:C505.0015: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 [10909.257196] usb 5-1.3: new full speed USB device using uhci_hcd and address 58 [10909.350213] usb 5-1.3: not running at top speed; connect to a high speed hub [10909.379216] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [10909.379230] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [10909.379241] usb 5-1.3: Product: Pinnacle PCTV [10909.379249] usb 5-1.3: SerialNumber: 000009001167 [10909.379337] usb 5-1.3: configuration #1 chosen from 1 choice [10909.382244] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [10909.382308] dvb-usb: will use the device's hardware PID filter (table count: 8). [10909.385418] DVB: registering new adapter (Pinnacle PCTV 310e) [10909.390176] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [10909.392177] tuner-simple 0-0061: creating new instance [10909.392184] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [10909.392255] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input39 [10909.392307] dvb-usb: schedule remote query interval to 100 msecs. [10909.392313] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [10909.523208] usb 5-1.1.1: new full speed USB device using uhci_hcd and address 59 [10909.625227] usb 5-1.1.1: not running at top speed; connect to a high speed hub [10909.633173] usb 5-1.1.1: New USB device found, idVendor=0424, idProduct=2602 [10909.633180] usb 5-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [10909.633310] usb 5-1.1.1: configuration #1 chosen from 1 choice [10909.637302] hub 5-1.1.1:1.0: USB hub found [10909.639397] hub 5-1.1.1:1.0: 4 ports detected [10909.929200] usb 5-1.1.1.1: new full speed USB device using uhci_hcd and address 60 [10910.050187] usb 5-1.1.1.1: not running at top speed; connect to a high speed hub [10910.133215] usb 5-1.1.1.1: New USB device found, idVendor=0424, idProduct=2228 [10910.133227] usb 5-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [10910.133233] usb 5-1.1.1.1: Product: Flash Card Reader [10910.133237] usb 5-1.1.1.1: Manufacturer: Generic [10910.133241] usb 5-1.1.1.1: SerialNumber: 071005102750 [10910.133374] usb 5-1.1.1.1: configuration #1 chosen from 1 choice [10910.143298] scsi11 : SCSI emulation for USB Mass Storage devices [10910.143493] usb-storage: device found at 60 [10910.143495] usb-storage: waiting for device to settle before scanning [10911.154219] scsi 11:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [10911.154416] sd 11:0:0:0: Attached scsi generic sg2 type 0 [10911.165282] scsi 11:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [10911.165443] sd 11:0:0:1: Attached scsi generic sg3 type 0 [10911.175387] sd 11:0:0:0: [sdb] Attached SCSI removable disk [10911.292224] sd 11:0:0:1: [sdc] Attached SCSI removable disk [10911.292282] usb-storage: device scan complete [10961.431432] __ratelimit: 3 callbacks suppressed [10961.431444] nepomukservices[12517]: segfault at 4 ip 00007fdc1ea38e37 sp 00007fff88b41e48 error 4 in libsoprano.so.4.3.0[7fdc1e9ea000+f1000] [10961.909142] nepomukservices[26535] general protection ip:7f0ce2a92e37 sp:7fff17a0c8d8 error:0 in libsoprano.so.4.3.0[7f0ce2a44000+f1000] [10962.083426] nepomukservices[26545]: segfault at 5 ip 00007ffc4c38be37 sp 00007fff49cec588 error 4 in libsoprano.so.4.3.0[7ffc4c33d000+f1000] [10962.193941] nepomukservices[26546]: segfault at 300000009 ip 00007f4495994e30 sp 00007fffffd268a8 error 4 in libsoprano.so.4.3.0[7f4495946000+f1000] [10962.291120] nepomukservices[26547]: segfault at 100000009 ip 00007fe6e1a91e30 sp 00007fffbf2cb458 error 4 in libsoprano.so.4.3.0[7fe6e1a43000+f1000] [10962.394820] nepomukservices[26548]: segfault at 7 ip 00007f43c118ee37 sp 00007fff065c03e8 error 4 in libsoprano.so.4.3.0[7f43c1140000+f1000] [11263.196940] m920x_read = error: -71 [11263.196950] dvb-usb: error while querying for an remote control event. [11263.297953] m920x_read = error: -71 [11263.297965] dvb-usb: error while querying for an remote control event. [11263.314939] usb 5-1.3: USB disconnect, address 58 [11263.323211] tuner-simple 0-0061: destroying instance [11263.323454] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [11266.027175] usb 5-1: USB disconnect, address 55 [11266.027194] usb 5-1.1: USB disconnect, address 56 [11266.027199] usb 5-1.1.1: USB disconnect, address 59 [11266.027203] usb 5-1.1.1.1: USB disconnect, address 60 [11266.034156] usb 5-1.2: USB disconnect, address 57 [11266.257149] usb 5-1: new full speed USB device using uhci_hcd and address 61 [11266.388944] usb 5-1: not running at top speed; connect to a high speed hub [11266.408948] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608 [11266.408963] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [11266.408974] usb 5-1: Product: USB2.0 Hub [11266.409175] usb 5-1: configuration #1 chosen from 1 choice [11266.411956] hub 5-1:1.0: USB hub found [11266.413917] hub 5-1:1.0: 4 ports detected [11266.693939] usb 5-1.1: new full speed USB device using uhci_hcd and address 62 [11266.783928] usb 5-1.1: not running at top speed; connect to a high speed hub [11266.790915] usb 5-1.1: New USB device found, idVendor=0424, idProduct=2502 [11266.790923] usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [11266.791059] usb 5-1.1: configuration #1 chosen from 1 choice [11266.792952] hub 5-1.1:1.0: USB hub found [11266.793915] hub 5-1.1:1.0: 2 ports detected [11266.866940] usb 5-1.2: new low speed USB device using uhci_hcd and address 63 [11267.000921] usb 5-1.2: New USB device found, idVendor=046d, idProduct=c505 [11267.000933] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [11267.000938] usb 5-1.2: Product: USB Receiver [11267.000942] usb 5-1.2: Manufacturer: Logitech [11267.001228] usb 5-1.2: configuration #1 chosen from 1 choice [11267.018288] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input40 [11267.018403] generic-usb 0003:046D:C505.0016: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 [11267.051452] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input41 [11267.051584] generic-usb 0003:046D:C505.0017: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 [11267.118950] usb 5-1.3: new full speed USB device using uhci_hcd and address 64 [11267.211937] usb 5-1.3: not running at top speed; connect to a high speed hub [11267.240939] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [11267.240953] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [11267.240964] usb 5-1.3: Product: Pinnacle PCTV [11267.240972] usb 5-1.3: SerialNumber: 000009001167 [11267.241160] usb 5-1.3: configuration #1 chosen from 1 choice [11267.242973] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [11267.243104] dvb-usb: will use the device's hardware PID filter (table count: 8). [11267.245139] DVB: registering new adapter (Pinnacle PCTV 310e) [11267.250235] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [11267.251915] tuner-simple 0-0061: creating new instance [11267.251922] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [11267.251995] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input42 [11267.252055] dvb-usb: schedule remote query interval to 100 msecs. [11267.252061] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [11267.351939] usb 5-1.1.1: new full speed USB device using uhci_hcd and address 65 [11267.462972] usb 5-1.1.1: not running at top speed; connect to a high speed hub [11267.470926] usb 5-1.1.1: New USB device found, idVendor=0424, idProduct=2602 [11267.470935] usb 5-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [11267.471076] usb 5-1.1.1: configuration #1 chosen from 1 choice [11267.472956] hub 5-1.1.1:1.0: USB hub found [11267.474910] hub 5-1.1.1:1.0: 4 ports detected [11267.764914] usb 5-1.1.1.1: new full speed USB device using uhci_hcd and address 66 [11267.890914] usb 5-1.1.1.1: not running at top speed; connect to a high speed hub [11267.975031] usb 5-1.1.1.1: New USB device found, idVendor=0424, idProduct=2228 [11267.975040] usb 5-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [11267.975046] usb 5-1.1.1.1: Product: Flash Card Reader [11267.975050] usb 5-1.1.1.1: Manufacturer: Generic [11267.975054] usb 5-1.1.1.1: SerialNumber: 071005102750 [11267.975195] usb 5-1.1.1.1: configuration #1 chosen from 1 choice [11267.977074] scsi12 : SCSI emulation for USB Mass Storage devices [11268.017279] usb-storage: device found at 66 [11268.017283] usb-storage: waiting for device to settle before scanning [11269.027923] scsi 12:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [11269.028131] sd 12:0:0:0: Attached scsi generic sg2 type 0 [11269.042921] scsi 12:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [11269.043092] sd 12:0:0:1: Attached scsi generic sg3 type 0 [11269.048410] sd 12:0:0:0: [sdb] Attached SCSI removable disk [11269.154908] sd 12:0:0:1: [sdc] Attached SCSI removable disk [11269.154917] usb-storage: device scan complete [14580.609526] applesmc: wait status failed: 5 != 1 [18791.366622] m920x_read = error: -71 [18791.366635] dvb-usb: error while querying for an remote control event. [18791.459615] usb 5-1.3: USB disconnect, address 64 [18791.467934] tuner-simple 0-0061: destroying instance [18791.468213] dvb-usb: Pinnacle PCTV 310e successfully deinitialized and disconnected. [18795.086069] usb 5-1: USB disconnect, address 61 [18795.086079] usb 5-1.1: USB disconnect, address 62 [18795.086083] usb 5-1.1.1: USB disconnect, address 65 [18795.086088] usb 5-1.1.1.1: USB disconnect, address 66 [18795.090062] usb 5-1.2: USB disconnect, address 63 [18795.320141] usb 5-1: new full speed USB device using uhci_hcd and address 67 [18795.452599] usb 5-1: not running at top speed; connect to a high speed hub [18795.472594] usb 5-1: New USB device found, idVendor=05e3, idProduct=0608 [18795.472608] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [18795.472619] usb 5-1: Product: USB2.0 Hub [18795.472773] usb 5-1: configuration #1 chosen from 1 choice [18795.476619] hub 5-1:1.0: USB hub found [18795.478716] hub 5-1:1.0: 4 ports detected [18795.759601] usb 5-1.1: new full speed USB device using uhci_hcd and address 68 [18795.849686] usb 5-1.1: not running at top speed; connect to a high speed hub [18795.856593] usb 5-1.1: New USB device found, idVendor=0424, idProduct=2502 [18795.856607] usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [18795.856735] usb 5-1.1: configuration #1 chosen from 1 choice [18795.860613] hub 5-1.1:1.0: USB hub found [18795.861571] hub 5-1.1:1.0: 2 ports detected [18795.934593] usb 5-1.2: new low speed USB device using uhci_hcd and address 69 [18796.062592] usb 5-1.2: New USB device found, idVendor=046d, idProduct=c505 [18796.062606] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [18796.062617] usb 5-1.2: Product: USB Receiver [18796.062625] usb 5-1.2: Manufacturer: Logitech [18796.062757] usb 5-1.2: configuration #1 chosen from 1 choice [18796.079921] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input43 [18796.080046] generic-usb 0003:046D:C505.0018: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 [18796.113124] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input44 [18796.113237] generic-usb 0003:046D:C505.0019: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 [18796.181600] usb 5-1.3: new full speed USB device using uhci_hcd and address 70 [18796.275572] usb 5-1.3: not running at top speed; connect to a high speed hub [18796.302594] usb 5-1.3: New USB device found, idVendor=13d3, idProduct=3211 [18796.302609] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [18796.302620] usb 5-1.3: Product: Pinnacle PCTV [18796.302628] usb 5-1.3: SerialNumber: 000009001167 [18796.302757] usb 5-1.3: configuration #1 chosen from 1 choice [18796.306583] dvb-usb: found a 'Pinnacle PCTV 310e' in warm state. [18796.306663] dvb-usb: will use the device's hardware PID filter (table count: 8). [18796.308808] DVB: registering new adapter (Pinnacle PCTV 310e) [18796.312556] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... [18796.314615] tuner-simple 0-0061: creating new instance [18796.314623] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [18796.314688] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/input/input45 [18796.314737] dvb-usb: schedule remote query interval to 100 msecs. [18796.314743] dvb-usb: Pinnacle PCTV 310e successfully initialized and connected. [18796.416595] usb 5-1.1.1: new full speed USB device using uhci_hcd and address 71 [18796.523548] usb 5-1.1.1: not running at top speed; connect to a high speed hub [18796.531566] usb 5-1.1.1: New USB device found, idVendor=0424, idProduct=2602 [18796.531574] usb 5-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [18796.531698] usb 5-1.1.1: configuration #1 chosen from 1 choice [18796.533612] hub 5-1.1.1:1.0: USB hub found [18796.535564] hub 5-1.1.1:1.0: 4 ports detected [18796.826647] usb 5-1.1.1.1: new full speed USB device using uhci_hcd and address 72 [18796.953558] usb 5-1.1.1.1: not running at top speed; connect to a high speed hub [18797.037547] usb 5-1.1.1.1: New USB device found, idVendor=0424, idProduct=2228 [18797.037558] usb 5-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [18797.037563] usb 5-1.1.1.1: Product: Flash Card Reader [18797.037568] usb 5-1.1.1.1: Manufacturer: Generic [18797.037571] usb 5-1.1.1.1: SerialNumber: 071005102750 [18797.037701] usb 5-1.1.1.1: configuration #1 chosen from 1 choice [18797.043981] scsi13 : SCSI emulation for USB Mass Storage devices [18797.044141] usb-storage: device found at 72 [18797.044143] usb-storage: waiting for device to settle before scanning [18798.054574] scsi 13:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [18798.054770] sd 13:0:0:0: Attached scsi generic sg2 type 0 [18798.058543] scsi 13:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [18798.058681] sd 13:0:0:1: Attached scsi generic sg3 type 0 [18798.069566] sd 13:0:0:0: [sdb] Attached SCSI removable disk [18798.126751] usb-storage: device scan complete [18798.136578] sd 13:0:0:1: [sdc] Attached SCSI removable disk