ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.7 (b) loading
ivtv: Linux version: 2.6.12-gentoo-r4 SMP preempt PENTIUM4 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: User specified WinTV PVR 250 card
ivtv: Found an iTVC15 based chip
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Hauppauge: model = 48011, rev = G510, serial# = 2669773
tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3435 (type = 10)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x009d5450, Revision 0x00000004
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x00, (1F) 0xc0
msp34xx: ivtv version
msp34xx: init: chip=MSP3435G-B6, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Aug  2 2005 18:49:47
ivtv: i2c attach [client=MSP3435G-B6,ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 0
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 32
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 224
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv: Setting Tuner 2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #0
saa7115: decoder set norm NTSC
ivtv: ivtv_enc_thread: pid = 4716, itv = 0xd092f220
ivtv: ivtv_enc_vbi_thread: pid = 4717, itv = 0xd092f220
saa7115: set audio: 0x01
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized WinTV PVR 250, card #0
ivtv: User specified AVerMedia M179 card
ivtv: Found an iTVC15 based chip
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Encountered bad packet header [04]. Corrupt or not a Hauppauge eeprom.
ivtv: i2c attach [client=tveeprom[50],ok]
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x00, (1F) 0x40
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Decoder revision: 0x02020023
ivtv: Configuring AVerMedia M179 card with 4 streams
ivtv: Registered v4l2 device for encoder MPEG minor 1
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 33
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 225
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 25
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Setting Tuner 2
ivtv: i2c client id: 0x02 not found!
saa7115: decoder set norm NTSC
ivtv: ivtv_enc_thread: pid = 4744, itv = 0xd095264c
ivtv: ivtv_enc_vbi_thread: pid = 4745, itv = 0xd095264c
saa7115: set audio: 0x01
ivtv: i2c client id: 0x02 not found!
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Switching standard to NTSC.
ivtv: i2c client id: 0x02 not found!
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized AVerMedia M179, card #1
ivtv: User specified AVerMedia M179 card
ivtv: Found an iTVC15 based chip
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Encountered bad packet header [04]. Corrupt or not a Hauppauge eeprom.
ivtv: i2c attach [client=tveeprom[50],ok]
saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x00, (1F) 0xc0
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Decoder revision: 0x02020023
ivtv: Configuring AVerMedia M179 card with 4 streams
ivtv: Registered v4l2 device for encoder MPEG minor 2
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 34
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 226
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 26
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Setting Tuner 2
ivtv: i2c client id: 0x02 not found!
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: i2c client id: 0x02 not found!
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Switching standard to NTSC.
ivtv: i2c client id: 0x02 not found!
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized AVerMedia M179, card #2
ivtv: ====================  END INIT IVTV  ====================
ivtv: ivtv_enc_thread: pid = 4771, itv = 0xd0975a78
ivtv: ivtv_enc_vbi_thread: pid = 4772, itv = 0xd0975a78
cdrom: open failed.
XFS mounting filesystem dm-0
Ending clean XFS mount for filesystem: dm-0
XFS mounting filesystem dm-1
Ending clean XFS mount for filesystem: dm-1
via82xx: Assuming DXS channels with 48k fixed sample rate.
         Please try dxs_support=1 or dxs_support=4 option
         and report if it works on your machine.
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:11.5 to 64
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder disable output
saa7115: decoder enable output
saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder disable output
ivtv: i2c client id: 0x02 not found!
saa7115: decoder enable output
saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder disable output
ivtv: i2c client id: 0x02 not found!
saa7115: decoder enable output
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set size
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
saa7115: decoder disable output
saa7115: decoder enable output
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown