Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #2: Tue Oct  3 20:15:54 UTC 2006
    tbw@:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz (2395.92-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,XTPR,<b15>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 1072558080 (1022 MB)
avail memory = 1040310272 (992 MB)
mptable_probe: MP Config Table has bad signature: \^A\M^E\^B
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <IntelR AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link3: BIOS IRQ 9 does not match initial IRQ 11
pci_link5: BIOS IRQ 9 does not match initial IRQ 5
pci_link3: BIOS IRQ 11 for 0.31.INTB does not match previous BIOS IRQ 9
pci_link3: BIOS IRQ 11 for 0.31.INTB does not match previous BIOS IRQ 9
pci_link3: BIOS IRQ 11 for 0.31.INTB does not match previous BIOS IRQ 9
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 10 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 10 at device 0.0 on pci1
uhci0: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 10 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 9 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdfff000-0xfdfff3ff irq 11 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcib2: <ACPI PCI-PCI bridge> irq 10 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <JMicron JMB361 SATA300 controller> port 0xbf00-0xbf07,0xbe00-0xbe03,0xbd00-0xbd07,0xbc00-0xbc03,0xbb00-0xbb0f mem 0xfdbfe000-0xfdbfffff irq 10 at device 0.0 on pci2
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
uhci2: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 10 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 9 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 11 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq 10 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci_link5: BIOS IRQ 5 for 3.6.INTA does not match previous BIOS IRQ 9
pci3: <ACPI PCI bus> on pcib3
pci3: <multimedia, audio> at device 0.0 (no driver attached)
pci3: <input device> at device 0.1 (no driver attached)
fwohci0: <1394 Open Host Controller Interface> mem 0xfdeff000-0xfdeff7ff,0xfdef8000-0xfdefbfff irq 9 at device 0.2 on pci3
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:01:01:5b:28
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:01:5b:28
fwe0: Ethernet address: 02:02:3c:01:5b:28
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xcc00-0xccff mem 0xfdefe000-0xfdefe0ff irq 9 at device 6.0 on pci3
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: Ethernet address: 00:16:17:93:1c:7d
re0: [FAST]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port 0xfa00-0xfa07,0xf900-0xf903,0xf800-0xf807,0xf700-0xf703,0xf600-0xf60f,0xf500-0xf50f irq 9 at device 31.2 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH8 SATA300 controller> port 0xf300-0xf307,0xf200-0xf203,0xf100-0xf107,0xf000-0xf003,0xef00-0xef0f,0xee00-0xee0f irq 9 at device 31.5 on pci0
ata6: <ATA channel 0> on atapci2
ata7: <ATA channel 1> on atapci2
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _PSV value is absurd, ignored (1672.0C)
acpi_tz0: _ACx value is absurd, ignored (1672.0C)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FAST]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd27ff,0xef000-0xeffff pnpid ORM0000 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB-PS/2 Trackball, class 0/0, rev 1.00/2.10, addr 2> on uhub5
ums0: 2 buttons.
Timecounter "TSC" frequency 2395923822 Hz quality 800
Timecounters tick every 1.000 msec
acpi_tz0: _PSV value is absurd, ignored (1672.0C)
acpi_tz0: _ACx value is absurd, ignored (1672.0C)
ad4: 35304MB <WDC WD360GD-00FNA0 35.06K35> at ata2-master SATA150
acpi_tz0: _PSV value is absurd, ignored (1672.0C)
acpi_tz0: _ACx value is absurd, ignored (1672.0C)
acd0: DVDR <DVD RW DRU-820A/1.0a> at ata3-master UDMA66
ad10: 238475MB <WDC WD2500JD-00HBC0 08.02D08> at ata5-master SATA150
Trying to mount root from ufs:/dev/ad4s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 4 files 1
re0: link state changed to UP
pid 810 (Xorg), uid 0: exited on signal 6 (core dumped)
pid 826 (Xorg), uid 0: exited on signal 6 (core dumped)
pid 33693 (Xorg), uid 0: exited on signal 6 (core dumped)
pid 33706 (Xorg), uid 0: exited on signal 6 (core dumped)
pid 85441 (conftest), uid 0: exited on signal 11 (core dumped)
pid 46635 (Xorg), uid 0: exited on signal 6 (core dumped)
pid 46652 (Xorg), uid 0: exited on signal 6 (core dumped)
pid 46680 (Xorg), uid 0: exited on signal 6 (core dumped)
pid 46706 (Xorg), uid 0: exited on signal 6 (core dumped)
pid 46733 (Xorg), uid 0: exited on signal 6 (core dumped)
pid 46770 (Xorg), uid 0: exited on signal 6 (core dumped)
pid 49208 (Xorg), uid 0: exited on signal 6 (core dumped)
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 1 0 0 done
All buffers synced.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #2: Tue Oct  3 20:15:54 UTC 2006
    tbw@:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz (2395.92-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,XTPR,<b15>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 1072558080 (1022 MB)
avail memory = 1031921664 (984 MB)
mptable_probe: MP Config Table has bad signature: \^A\M^E\^B
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <IntelR AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link3: BIOS IRQ 9 does not match initial IRQ 11
pci_link5: BIOS IRQ 9 does not match initial IRQ 5
pci_link3: BIOS IRQ 11 for 0.31.INTB does not match previous BIOS IRQ 9
pci_link3: BIOS IRQ 11 for 0.31.INTB does not match previous BIOS IRQ 9
pci_link3: BIOS IRQ 11 for 0.31.INTB does not match previous BIOS IRQ 9
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 10 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce 7600 GS> port 0xdf00-0xdf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 10 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 10 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 9 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdfff000-0xfdfff3ff irq 11 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcib2: <ACPI PCI-PCI bridge> irq 10 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <JMicron JMB361 SATA300 controller> port 0xbf00-0xbf07,0xbe00-0xbe03,0xbd00-0xbd07,0xbc00-0xbc03,0xbb00-0xbb0f mem 0xfdbfe000-0xfdbfffff irq 10 at device 0.0 on pci2
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
uhci2: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 10 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 9 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 11 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq 10 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci_link5: BIOS IRQ 5 for 3.6.INTA does not match previous BIOS IRQ 9
pci3: <ACPI PCI bus> on pcib3
pci3: <multimedia, audio> at device 0.0 (no driver attached)
pci3: <input device> at device 0.1 (no driver attached)
fwohci0: <1394 Open Host Controller Interface> mem 0xfdeff000-0xfdeff7ff,0xfdef8000-0xfdefbfff irq 9 at device 0.2 on pci3
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:01:01:5b:28
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:01:5b:28
fwe0: Ethernet address: 02:02:3c:01:5b:28
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xcc00-0xccff mem 0xfdefe000-0xfdefe0ff irq 9 at device 6.0 on pci3
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: Ethernet address: 00:16:17:93:1c:7d
re0: [FAST]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port 0xfa00-0xfa07,0xf900-0xf903,0xf800-0xf807,0xf700-0xf703,0xf600-0xf60f,0xf500-0xf50f irq 9 at device 31.2 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH8 SATA300 controller> port 0xf300-0xf307,0xf200-0xf203,0xf100-0xf107,0xf000-0xf003,0xef00-0xef0f,0xee00-0xee0f irq 9 at device 31.5 on pci0
ata6: <ATA channel 0> on atapci2
ata7: <ATA channel 1> on atapci2
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _PSV value is absurd, ignored (1672.0C)
acpi_tz0: _ACx value is absurd, ignored (1672.0C)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FAST]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd27ff,0xef000-0xeffff pnpid ORM0000 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB-PS/2 Trackball, class 0/0, rev 1.00/2.10, addr 2> on uhub5
ums0: 2 buttons.
Timecounter "TSC" frequency 2395921662 Hz quality 800
Timecounters tick every 1.000 msec
acpi_tz0: _PSV value is absurd, ignored (1672.0C)
acpi_tz0: _ACx value is absurd, ignored (1672.0C)
acpi_tz0: _PSV value is absurd, ignored (1672.0C)
acpi_tz0: _ACx value is absurd, ignored (1672.0C)
ad4: 35304MB <WDC WD360GD-00FNA0 35.06K35> at ata2-master SATA150
acd0: DVDR <DVD RW DRU-820A/1.0a> at ata3-master UDMA66
ad10: 238475MB <WDC WD2500JD-00HBC0 08.02D08> at ata5-master SATA150
Trying to mount root from ufs:/dev/ad4s1a
re0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 3 1 0 0 done
All buffers synced.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #0: Thu Oct  5 22:08:00 UTC 2006
    tbw@:/usr/src/sys/i386/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz (2395.92-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,XTPR,<b15>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 1072558080 (1022 MB)
avail memory = 1031921664 (984 MB)
mptable_probe: MP Config Table has bad signature: \^A\M^E\^B
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <IntelR AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link3: BIOS IRQ 9 does not match initial IRQ 11
pci_link5: BIOS IRQ 9 does not match initial IRQ 5
pci_link3: BIOS IRQ 11 for 0.31.INTB does not match previous BIOS IRQ 9
pci_link3: BIOS IRQ 11 for 0.31.INTB does not match previous BIOS IRQ 9
pci_link3: BIOS IRQ 11 for 0.31.INTB does not match previous BIOS IRQ 9
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 10 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce 7600 GS> port 0xdf00-0xdf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 10 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 10 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 9 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdfff000-0xfdfff3ff irq 11 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcib2: <ACPI PCI-PCI bridge> irq 10 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <JMicron JMB361 SATA300 controller> port 0xbf00-0xbf07,0xbe00-0xbe03,0xbd00-0xbd07,0xbc00-0xbc03,0xbb00-0xbb0f mem 0xfdbfe000-0xfdbfffff irq 10 at device 0.0 on pci2
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
uhci2: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 10 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 9 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 11 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq 10 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci_link5: BIOS IRQ 5 for 3.6.INTA does not match previous BIOS IRQ 9
pci3: <ACPI PCI bus> on pcib3
pci3: <multimedia, audio> at device 0.0 (no driver attached)
pci3: <input device> at device 0.1 (no driver attached)
fwohci0: <1394 Open Host Controller Interface> mem 0xfdeff000-0xfdeff7ff,0xfdef8000-0xfdefbfff irq 9 at device 0.2 on pci3
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:01:01:5b:28
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:01:5b:28
fwe0: Ethernet address: 02:02:3c:01:5b:28
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xcc00-0xccff mem 0xfdefe000-0xfdefe0ff irq 9 at device 6.0 on pci3
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: Ethernet address: 00:16:17:93:1c:7d
re0: [FAST]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port 0xfa00-0xfa07,0xf900-0xf903,0xf800-0xf807,0xf700-0xf703,0xf600-0xf60f,0xf500-0xf50f irq 9 at device 31.2 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH8 SATA300 controller> port 0xf300-0xf307,0xf200-0xf203,0xf100-0xf107,0xf000-0xf003,0xef00-0xef0f,0xee00-0xee0f irq 9 at device 31.5 on pci0
ata6: <ATA channel 0> on atapci2
ata7: <ATA channel 1> on atapci2
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _PSV value is absurd, ignored (1672.0C)
acpi_tz0: _ACx value is absurd, ignored (1672.0C)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FAST]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd27ff,0xef000-0xeffff pnpid ORM0000 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB-PS/2 Trackball, class 0/0, rev 1.00/2.10, addr 2> on uhub5
ums0: 2 buttons.
Timecounter "TSC" frequency 2395922004 Hz quality 800
Timecounters tick every 1.000 msec
acpi_tz0: _PSV value is absurd, ignored (1672.0C)
acpi_tz0: _ACx value is absurd, ignored (1672.0C)
acpi_tz0: _PSV value is absurd, ignored (1672.0C)
acpi_tz0: _ACx value is absurd, ignored (1672.0C)
ad4: 35304MB <WDC WD360GD-00FNA0 35.06K35> at ata2-master SATA150
acd0: DVDR <DVD RW DRU-820A/1.0a> at ata3-master UDMA66
ad10: 238475MB <WDC WD2500JD-00HBC0 08.02D08> at ata5-master SATA150
Trying to mount root from ufs:/dev/ad4s1a