Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.99.39 (GENERIC) #0: Sat Sep 4 05:17:40 UTC 2010 builds@b6.netbsd.org:/home/builds/ab/HEAD/i386/201009040000Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC total memory = 2046 MB avail memory = 1999 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.) mainbus0 (root) cpu0 at mainbus0 apid 0: Intel 686-class, 2598MHz, id 0xf29 cpu1 at mainbus0 apid 1: Intel 686-class, 2598MHz, id 0xf29 ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20100528 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 UAR1 (PNP0501) at acpi0 not configured UAR2 (PNP0501) at acpi0 not configured FDC (PNP0700) at acpi0 not configured LPTE (PNP0401) at acpi0 not configured SIOR (PNP0C02) at acpi0 not configured RMSC (PNP0C02) at acpi0 not configured OMSC (PNP0C02) at acpi0 not configured RMEM (PNP0C01) at acpi0 not configured acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button apm0 at acpi0: Power Management spec V1.2 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2578 (rev. 0x02) agp0 at pchb0: aperture at 0xf8000000, size 0x4000000 ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x2579 (rev. 0x02) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: vendor 0x1002 product 0x4e44 (rev. 0x00) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 radeondrm0 at vga1: ATI Radeon ND R300 9700 Pro radeondrm0: AGP at 0xf8000000 64MB radeondrm0: Initialized radeon 1.29.0 20080613 vendor 0x1002 product 0x4e64 (miscellaneous display) at pci1 dev 0 function 1 not configured uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24d2 (rev. 0x02) uhci0: interrupting at ioapic0 pin 16 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24d4 (rev. 0x02) uhci1: interrupting at ioapic0 pin 19 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24d7 (rev. 0x02) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x24de (rev. 0x02) uhci3: interrupting at ioapic0 pin 16 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24dd (rev. 0x02) ehci0: interrupting at ioapic0 pin 23 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xc2) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled pdcsata0 at pci2 dev 4 function 0: Promise PDC20378 SATA150 controller (rev. 0x02) pdcsata0: interrupting at ioapic0 pin 23 pdcsata0: bus-master DMA support present atabus0 at pdcsata0 channel 0 atabus1 at pdcsata0 channel 1 atabus2 at pdcsata0 channel 2 skc0 at pci2 dev 5 function 0: ioapic0 pin 22 skc0: interrupt moderation is 0 us skc0: 3Com Gigabit LOM (3C940) rev. (0x1) sk0 at skc0 port A: Ethernet address 00:0c:6e:44:69:9a makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bktr0 at pci2 dev 13 function 0 bktr0: interrupting at ioapic0 pin 21 bktr0: Warning - card vendor 0x11bd (model 0x0012) unknown. bktr0: Pinnacle/Miro TV, Temic PAL tuner. vendor 0x109e product 0x0878 (miscellaneous multimedia, revision 0x11) at pci2 dev 13 function 1 not configured ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x24d0 (rev. 0x02) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. gpiobus at ichlpcib0 not configured piixide0 at pci0 dev 31 function 1: Intel 82801EB IDE Controller (ICH5) (rev. 0x02) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus3 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 atabus4 at piixide0 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x24d3 (rev. 0x02) ichsmb0: interrupting at ioapic0 pin 17 iic0 at ichsmb0: I2C bus auich0 at pci0 dev 31 function 5: i82801EB (ICH5) AC-97 Audio auich0: interrupting at ioapic0 pin 17 auich0: ac97: Analog Devices AD1985 codec; headphone, 20 bit DAC, no 3D stereo auich0: ac97: ext id 0x3c7 isa0 at ichlpcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz audio0 at auich0: full duplex, playback, capture, mmap, independent fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec uhub0 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered wd0 at atabus3 drive 0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd1 at atabus3 drive 1: wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) wd1(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus4: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd1 at atapibus0 drive 1: cdrom removable cd1: 32-bit data port cd1: drive supports PIO mode 4, DMA mode 2 cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) cd1(piixide0:1:1): using PIO mode 4, DMA mode 2 (using DMA) Kernelized RAIDframe activated boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs skc0: interrupt moderation is 1000 us wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) info: [drm] Setting GART location based on new memory map info: [drm] Loading R300 Microcode info: [drm] Num pipes: 2 info: [drm] writeback test succeeded in 1 usecs radeondrm0: interrupting at ioapic0 pin 16