Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Sep 29 08:45:18 CEST 2010 Command line: root=/dev/disk/by-uuid/b7349eda-f8ca-446e-addd-22517511ea54 ro BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable) BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data) BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS) BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) NX (Execute Disable) protection: active DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFF0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000130000000 aka 4864M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfe90 max_arch_pfn = 0x400000000 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e6000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000cfe90000 (usable) modified: 00000000cfe90000 - 00000000cfea8000 (ACPI data) modified: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS) modified: 00000000cfed0000 - 00000000cff00000 (reserved) modified: 00000000fff00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000130000000 (usable) initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000ff780] ff780 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000cfe90000 0000000000 - 00c0000000 page 1G 00c0000000 - 00cfe00000 page 2M 00cfe00000 - 00cfe90000 page 4k kernel direct mapping tables up to cfe90000 @ 16000-19000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ 18000-1a000 RAMDISK: 37e4a000 - 37ff0000 ACPI: RSDP 00000000000fb860 00024 (v02 ACPIAM) ACPI: XSDT 00000000cfe90100 0005C (v01 060710 XSDT1948 20100607 MSFT 00000097) ACPI: FACP 00000000cfe90290 000F4 (v03 060710 FACP1948 20100607 MSFT 00000097) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20100428/tbfadt-557) ACPI: DSDT 00000000cfe90450 0E856 (v01 A1160 A1160000 00000000 INTL 20060113) ACPI: FACS 00000000cfea8000 00040 ACPI: APIC 00000000cfe90390 0007C (v01 060710 APIC1948 20100607 MSFT 00000097) ACPI: MCFG 00000000cfe90410 0003C (v01 060710 OEMMCFG 20100607 MSFT 00000097) ACPI: OEMB 00000000cfea8040 00072 (v01 060710 OEMB1948 20100607 MSFT 00000097) ACPI: SRAT 00000000cfe9f450 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001) ACPI: HPET 00000000cfe9f560 00038 (v01 060710 OEMHPET 20100607 MSFT 00000097) ACPI: SSDT 00000000cfe9f5a0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880002000000-ffff8800059fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000cfe90 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1048095 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3927 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833224 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 6 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 early_res array is doubled to 64 at [19200 - 199ff] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000 PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000 PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000 PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at cff00000 (gap: cff00000:30000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:6 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88832 r8192 d21760 u262144 pcpu-alloc: s88832 r8192 d21760 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 - - Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031071 Kernel command line: root=/dev/disk/by-uuid/b7349eda-f8ca-446e-addd-22517511ea54 ro PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 366000000 size 32 MB Aperture beyond 4GB. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 early_res array is doubled to 128 at [19a00 - 1a9ff] Subtract (60 early reservations) #1 [0001000000 - 00016f9598] TEXT DATA BSS #2 [0037e4a000 - 0037ff0000] RAMDISK #3 [00016fa000 - 00016fa29c] BRK #4 [00000ff790 - 0000100000] BIOS reserved #5 [00000ff780 - 00000ff790] MP-table mpf #6 [000009fc00 - 00000f1160] BIOS reserved #7 [00000f1324 - 00000ff780] BIOS reserved #8 [00000f1160 - 00000f1324] MP-table mpc #9 [0000010000 - 0000012000] TRAMPOLINE #10 [0000012000 - 0000016000] ACPI WAKEUP #11 [0000016000 - 0000018000] PGTABLE #12 [0000018000 - 0000019000] PGTABLE #13 [00016fa2c0 - 00016fb2c0] BOOTMEM #14 [0000019000 - 0000019200] BOOTMEM #15 [0001efc000 - 0001efd000] BOOTMEM #16 [0001efd000 - 0001efe000] BOOTMEM #17 [0002000000 - 0005a00000] MEMMAP 0 #18 [00016fb2c0 - 00017132c0] BOOTMEM #19 [00017132c0 - 000172b2c0] BOOTMEM #20 [000172b2c0 - 00017432c0] BOOTMEM #21 [0001744000 - 0001745000] BOOTMEM #22 [00016f95c0 - 00016f9601] BOOTMEM #23 [00016f9640 - 00016f9683] BOOTMEM #24 [00016f96c0 - 00016f98f0] BOOTMEM #25 [00016f9900 - 00016f9968] BOOTMEM #26 [00016f9980 - 00016f99e8] BOOTMEM #27 [00016f9a00 - 00016f9a68] BOOTMEM #28 [00016f9a80 - 00016f9ae8] BOOTMEM #29 [00016f9b00 - 00016f9b68] BOOTMEM #30 [00016f9b80 - 00016f9be8] BOOTMEM #31 [00016f9c00 - 00016f9c68] BOOTMEM #32 [00016f9c80 - 00016f9ce8] BOOTMEM #33 [00016f9d00 - 00016f9d68] BOOTMEM #34 [00016f9d80 - 00016f9da0] BOOTMEM #35 [00016f9dc0 - 00016f9de0] BOOTMEM #36 [00016f9e00 - 00016f9e3f] BOOTMEM #37 [00016f9e40 - 00016f9e7f] BOOTMEM #38 [0001800000 - 000181d000] BOOTMEM #39 [0001840000 - 000185d000] BOOTMEM #40 [0001880000 - 000189d000] BOOTMEM #41 [00018c0000 - 00018dd000] BOOTMEM #42 [0001900000 - 000191d000] BOOTMEM #43 [0001940000 - 000195d000] BOOTMEM #44 [00016f9e80 - 00016f9e88] BOOTMEM #45 [00016f9ec0 - 00016f9ec8] BOOTMEM #46 [00016f9f00 - 00016f9f18] BOOTMEM #47 [00016f9f40 - 00016f9f70] BOOTMEM #48 [00017432c0 - 00017433e0] BOOTMEM #49 [00016f9f80 - 00016f9fc8] BOOTMEM #50 [0001743400 - 0001743448] BOOTMEM #51 [0001745000 - 000174d000] BOOTMEM #52 [000195d000 - 0001d5d000] BOOTMEM #53 [0005a00000 - 0005c00000] BOOTMEM #54 [0020000000 - 0024000000] BOOTMEM #55 [0001743480 - 00017434a0] BOOTMEM #56 [0005c00000 - 0009c00000] BOOTMEM #57 [000174d000 - 000176d000] BOOTMEM #58 [000176d000 - 00017ad000] BOOTMEM #59 [000001aa00 - 0000022a00] BOOTMEM Memory: 3985444k/4980736k available (3544k kernel code, 788356k absent, 206936k reserved, 1832k data, 488k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:768 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 3311.423 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5621.51 BogoMIPS (lpj=9365630) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20100428 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00 System has AMD C1E enabled Switch to broadcast mode on CPU0 Booting Node 0, Processors #1 Switch to broadcast mode on CPU1 #2 Switch to broadcast mode on CPU2 #3 Switch to broadcast mode on CPU3 #4 Switch to broadcast mode on CPU4 #5 Ok. Brought up 6 CPUs Switch to broadcast mode on CPU5 Total of 6 processors activated (33728.88 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000d0000000 aka 3328M Fam 10h mmconf [e0000000, efffffff] node 0 link 0: mmio [e0000000, efffffff] ==> none node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, dfffffff] TOM2: 0000000130000000 aka 4864M bus: [00, 07] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xf0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0xd0000000-0xdfffffff] bus: 00 index 4 [mem 0x130000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 3 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI Warning: Incorrect checksum in table [OEMB] - 0x94, should be 0x8B (20100428/tbutils-314) ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:11.0: reg 10: [io 0xb000-0xb007] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f] pci 0000:00:11.0: reg 24: [mem 0xfbcfe400-0xfbcfe7ff] pci 0000:00:11.0: set SATA to AHCI mode pci 0000:00:12.0: reg 10: [mem 0xfbcf6000-0xfbcf6fff] pci 0000:00:12.1: reg 10: [mem 0xfbcf7000-0xfbcf7fff] pci 0000:00:12.2: reg 10: [mem 0xfbcfe800-0xfbcfe8ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10: [mem 0xfbcfc000-0xfbcfcfff] pci 0000:00:13.1: reg 10: [mem 0xfbcfd000-0xfbcfdfff] pci 0000:00:13.2: reg 10: [mem 0xfbcfec00-0xfbcfecff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] pci 0000:00:14.2: reg 10: [mem 0xfbcf8000-0xfbcfbfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.5: reg 10: [mem 0xfbcff000-0xfbcfffff] pci 0000:04:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:04:00.0: reg 18: [mem 0xfbfc0000-0xfbfdffff 64bit] pci 0000:04:00.0: reg 20: [io 0xe000-0xe0ff] pci 0000:04:00.0: reg 30: [mem 0xfbfa0000-0xfbfbffff pref] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.1: reg 10: [mem 0xfbffc000-0xfbffffff 64bit] pci 0000:04:00.1: supports D1 D2 pci 0000:00:02.0: PCI bridge to [bus 04-04] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:03:00.0: reg 10: [io 0xd800-0xd8ff] pci 0000:03:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit] pci 0000:03:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:06.0: PCI bridge to [bus 03-03] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:00.0: reg 10: [mem 0xfbdff800-0xfbdfffff 64bit] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff] pci 0000:02:00.0: supports D2 pci 0000:02:00.0: PME# supported from D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:07.0: PCI bridge to [bus 02-02] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. HEST: Table is not found! vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved system 00:07: [io 0x04d0-0x04d1] has been reserved system 00:07: [io 0x040b] has been reserved system 00:07: [io 0x04d6] has been reserved system 00:07: [io 0x0c00-0x0c01] has been reserved system 00:07: [io 0x0c14] has been reserved system 00:07: [io 0x0c50-0x0c51] has been reserved system 00:07: [io 0x0c52] has been reserved system 00:07: [io 0x0c6c] has been reserved system 00:07: [io 0x0c6f] has been reserved system 00:07: [io 0x0cd0-0x0cd1] has been reserved system 00:07: [io 0x0cd2-0x0cd3] has been reserved system 00:07: [io 0x0cd4-0x0cd5] has been reserved system 00:07: [io 0x0cd6-0x0cd7] has been reserved system 00:07: [io 0x0cd8-0x0cdf] has been reserved system 00:07: [io 0x0b00-0x0b3f] has been reserved system 00:07: [io 0x0800-0x089f] has been reserved system 00:07: [io 0x0b00-0x0b0f] has been reserved system 00:07: [io 0x0b20-0x0b3f] has been reserved system 00:07: [io 0x0900-0x090f] has been reserved system 00:07: [io 0x0910-0x091f] has been reserved system 00:07: [io 0xfe00-0xfefe] has been reserved system 00:07: [mem 0xcff00000-0xcfffffff] has been reserved system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved system 00:0a: [io 0x0230-0x023f] has been reserved system 00:0a: [io 0x0290-0x029f] has been reserved system 00:0a: [io 0x0f40-0x0f4f] has been reserved system 00:0a: [io 0x0a30-0x0a3f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved pci 0000:00:02.0: PCI bridge to [bus 04-04] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:06.0: PCI bridge to [bus 03-03] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:00:06.0: bridge window [mem pref disabled] pci 0000:00:07.0: PCI bridge to [bus 02-02] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] pci 0000:00:07.0: bridge window [mem pref disabled] pci 0000:00:14.4: PCI bridge to [bus 01-01] pci 0000:00:14.4: bridge window [io disabled] pci 0000:00:14.4: bridge window [mem disabled] pci 0000:00:14.4: bridge window [mem pref disabled] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:07.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:04:00.0: Boot video device PCI: CLS 64 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 1688k freed PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1285842406.866:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7916 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:02.0: setting latency timer to 64 pcieport 0000:00:02.0: irq 40 for MSI/MSI-X pcieport 0000:00:06.0: setting latency timer to 64 pcieport 0000:00:06.0: irq 41 for MSI/MSI-X pcieport 0000:00:07.0: setting latency timer to 64 pcieport 0000:00:07.0: irq 42 for MSI/MSI-X ERST: Table is not found! Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 488k freed udev[66]: starting version 162 SCSI subsystem initialized Floppy drive(s): fd0 is 1.44M libata version 3.00 loaded. pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_acpi 0000:00:14.1: setting latency timer to 64 ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: irq 43 for MSI/MSI-X ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe500 irq 43 ata2: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe580 irq 43 ata3: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe600 irq 43 ata4: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe680 irq 43 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 FDC 0 is a post-1991 82077 ata5.01: ATA-7: ST3500630A, 3.AAF, max UDMA/100 ata5.01: 976773168 sectors, multi 16: LBA48 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) ata5.01: configured for UDMA/100 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-8: ST31500341AS, CC1H, max UDMA/133 ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 scsi 4:0:1:0: Direct-Access ATA ST3500630A 3.AA PQ: 0 ANSI: 5 sd 3:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 4:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:1:0: [sdb] Write Protect is off sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 3:0:0:0: [sda] Attached SCSI disk ata5: lost interrupt (Status 0x58) ata5: drained 65536 bytes to clear DRQ. ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata5.01: failed command: READ DMA ata5.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.01: status: { DRDY } ata5: soft resetting link ata5.01: configured for UDMA/100 ata5.01: device reported invalid CHS sector 0 ata5: EH complete ata5: lost interrupt (Status 0x58) ata5: drained 65536 bytes to clear DRQ. ata5.01: limiting speed to UDMA/66:PIO4 ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata5.01: failed command: READ DMA ata5.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.01: status: { DRDY } ata5: soft resetting link ata5.01: configured for UDMA/66 ata5.01: device reported invalid CHS sector 0 ata5: EH complete ata5: lost interrupt (Status 0x58) ata5: drained 65536 bytes to clear DRQ. ata5.01: limiting speed to UDMA/33:PIO4 ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata5.01: failed command: READ DMA ata5.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.01: status: { DRDY } ata5: soft resetting link ata5.01: configured for UDMA/33 ata5.01: device reported invalid CHS sector 0 ata5: EH complete ata5: lost interrupt (Status 0x58) ata5: drained 65536 bytes to clear DRQ. ata5.01: limiting speed to PIO4 ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata5.01: failed command: READ DMA ata5.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.01: status: { DRDY } ata5: soft resetting link ata5.01: configured for PIO4 ata5.01: device reported invalid CHS sector 0 ata5: EH complete sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > sdb: detected capacity change from 0 to 500107862016 sd 4:0:1:0: [sdb] Attached SCSI disk EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda3): mounted filesystem with writeback data mode rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs udev[753]: starting version 162 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: WMI: Mapper loaded input: PC Speaker as /devices/platform/pcspkr/input/input2 ACPI: acpi_idle registered with cpuidle EDAC MC: Ver: 2.1.0 Sep 29 2010 EDAC amd64_edac: Ver: 3.3.0 Sep 29 2010 EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) amd64_edac: probe of 0000:00:18.2 failed with error -22 sd 3:0:0:0: Attached scsi generic sg0 type 0 sd 4:0:1:0: Attached scsi generic sg1 type 0 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:03:00.0: setting latency timer to 64 r8169 0000:03:00.0: irq 44 for MSI/MSI-X r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc90010402000, e0:cb:4e:54:a8:28, XID 18000000 IRQ 44 [drm] Initialized drm 1.1.0 20060810 ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0x0b00-0x0b0f 64bit] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver powernow-k8: Found 1 AMD Phenom(tm) II X6 1055T Processor (6 cpu cores) (version 2.20.00) powernow-k8: Core Performance Boosting: on. powernow-k8: 0 : pstate 0 (2800 MHz) powernow-k8: 1 : pstate 1 (2200 MHz) powernow-k8: 2 : pstate 2 (1500 MHz) powernow-k8: 3 : pstate 3 (800 MHz) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcfe800 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcfec00 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected firewire_ohci 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 firewire_ohci 0000:02:00.0: setting latency timer to 64 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:04:00.0: setting latency timer to 64 [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6899). [drm] register mmio base: 0xFBFC0000 [drm] register mmio size: 131072 ATOM BIOS: CYPRESS [drm] Clocks initialized ! radeon 0000:04:00.0: VRAM: 1024M 0x00000000 - 0x3FFFFFFF (1024M used) radeon 0000:04:00.0: GTT: 512M 0x40000000 - 0x5FFFFFFF [drm] Detected VRAM RAM=1024M, BAR=256M [drm] RAM width 256bits DDR [TTM] Zone kernel: Available graphics memory: 2026784 kiB. [TTM] Initializing pool allocator. [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:04:00.0: irq 45 for MSI/MSI-X radeon 0000:04:00.0: radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading CYPRESS Microcode firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcf6000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcf7000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfc000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfd000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcff000 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] DisplayPort [drm] HPD4 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY2 [drm] Connector 1: [drm] HDMI-A [drm] HPD5 [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [drm] Encoders: [drm] DFP2: INTERNAL_UNIPHY2 [drm] Connector 2: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [drm] Encoders: [drm] DFP3: INTERNAL_UNIPHY1 [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 3: [drm] DVI-I [drm] HPD6 [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [drm] Encoders: [drm] DFP4: INTERNAL_UNIPHY [drm] CRT1: INTERNAL_KLDSCP_DAC1 hda_codec: ALC1200: BIOS auto-probing. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input3 firewire_core: created device fw0: GUID 001e8c0000c5c38e, S400 usb 4-2: new low speed USB device using ohci_hcd and address 2 [drm] Internal thermal controller with fan control [drm] radeon: power management initialized [drm] fb mappable at 0xD0140000 [drm] vram apper at 0xD0000000 [drm] size 7258112 [drm] fb depth is 24 [drm] pitch is 6912 usb 4-3: new low speed USB device using ohci_hcd and address 3 Console: switching to colour frame buffer device 210x65 fb0: radeondrmfb frame buffer device drm: registered panic notifier Slow work thread pool: Starting up Slow work thread pool: Ready [drm] Initialized radeon 2.5.0 20080528 for 0000:04:00.0 on minor 0 HDA Intel 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:04:00.1: irq 46 for MSI/MSI-X HDA Intel 0000:04:00.1: setting latency timer to 64 usbcore: registered new interface driver hiddev input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input4 generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:12.1-2/input0 input: USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input5 generic-usb 0003:1241:1503.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:12.1-3/input0 input: USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input6 generic-usb 0003:1241:1503.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:12.1-3/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver EXT3-fs (sda3): using internal journal EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda2): using internal journal EXT3-fs (sda2): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda6): using internal journal EXT3-fs (sda6): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sdb1): using internal journal EXT3-fs (sdb1): mounted filesystem with writeback data mode Adding 995992k swap on /dev/sda5. Priority:-1 extents:1 across:995992k r8169 0000:03:00.0: eth0: link up r8169 0000:03:00.0: eth0: link up it87: Found IT8720F chip at 0x290, revision 2 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region SIOE [mem 0x00000290-0x000002af] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver fuse init (API version 7.14)