Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Writing extended state information... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... # sensors-detect revision 5842 (2010-06-19 21:47:45 +0200) # System: nVidia MCP79 # Board: To be filled by O.E.M. To be filled by O.E.M. This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No Intel Core family thermal sensor... No Intel Atom thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes Found `Fintek F71858DG Super IO Sensors' Success! (address 0xa00, driver `f71882fg') Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-nforce2' for device 0000:00:03.2: nVidia Corporation nForce SMBus (MCP79) Module i2c-dev loaded successfully. Next adapter: SMBus nForce2 adapter at 4d00 (i2c-0) Do you want to scan it? (yes/NO/selectively): Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... No Client found at address 0x51 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Client found at address 0x52 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Client found at address 0x53 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Next adapter: NVIDIA i2c adapter (i2c-1) Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-2) Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-3) Do you want to scan it? (YES/no/selectively): Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel Atom thermal sensor' (confidence: 9) Driver `f71882fg': * ISA bus, address 0xa00 Chip `Fintek F71858DG Super IO Sensors' (confidence: 9) Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors for initialization at boot time. You should now start the lm_sensors service to load the required kernel modules. Unloading i2c-dev... OK * Setting sensors limits ...done. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... The following NEW packages will be installed: autoconf{a} automake autotools-dev{a} m4{a} 0 packages upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 1,685kB of archives. After unpacking 4,915kB will be used. Writing extended state information... Get:1 http://free.nchc.org.tw/ubuntu/ lucid/main m4 1.4.13-3 [241kB] Get:2 http://free.nchc.org.tw/ubuntu/ lucid/main autoconf 2.65-3ubuntu1 [772kB] Get:3 http://free.nchc.org.tw/ubuntu/ lucid/main autotools-dev 20090611.1 [64.1kB] Get:4 http://free.nchc.org.tw/ubuntu/ lucid/main automake 1:1.11.1-1 [608kB] Fetched 1,685kB in 2min 15s (12.4kB/s) Selecting previously deselected package m4. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 112625 files and directories currently installed.) Unpacking m4 (from .../archives/m4_1.4.13-3_i386.deb) ... Selecting previously deselected package autoconf. Unpacking autoconf (from .../autoconf_2.65-3ubuntu1_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20090611.1_all.deb) ... Selecting previously deselected package automake. Unpacking automake (from .../automake_1%3a1.11.1-1_all.deb) ... Processing triggers for install-info ... install-info: warning: no info dir entry in `/usr/share/info/sbm-cz.info.gz' install-info: warning: no info dir entry in `/usr/share/info/sbm-zh.info.gz' install-info: warning: no info dir entry in `/usr/share/info/sbm.info.gz' Processing triggers for man-db ... Setting up m4 (1.4.13-3) ... Setting up autoconf (2.65-3ubuntu1) ... Setting up autotools-dev (20090611.1) ... Setting up automake (1:1.11.1-1) ... update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode. Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... U nvclock/.cvsignore U nvclock/ABOUT U nvclock/AUTHORS U nvclock/COPYING U nvclock/ChangeLog U nvclock/FAQ U nvclock/INSTALL U nvclock/Makefile.in U nvclock/NEWS U nvclock/README U nvclock/acinclude.m4 U nvclock/autogen.sh U nvclock/config.h.in U nvclock/configure U nvclock/configure.in U nvclock/install-sh U nvclock/nvclock.1 U nvclock/nvclock.desktop U nvclock/nvclock.png U nvclock/src/.cvsignore U nvclock/src/Makefile.in U nvclock/src/nvclock.c U nvclock/src/smartdimmer.c U nvclock/src/backend/Makefile U nvclock/src/backend/Makefile.in U nvclock/src/backend/adt7473.c U nvclock/src/backend/back_bsd.c U nvclock/src/backend/back_linux.c U nvclock/src/backend/back_solaris.c U nvclock/src/backend/back_win32.c U nvclock/src/backend/backend.c U nvclock/src/backend/backend.h U nvclock/src/backend/bios.c U nvclock/src/backend/config.c U nvclock/src/backend/error.c U nvclock/src/backend/f75375.c U nvclock/src/backend/f75375.h U nvclock/src/backend/i2c.c U nvclock/src/backend/i2c.h U nvclock/src/backend/info.c U nvclock/src/backend/libc_wrapper.c U nvclock/src/backend/lm99.c U nvclock/src/backend/nv30.c U nvclock/src/backend/nv40.c U nvclock/src/backend/nv50.c U nvclock/src/backend/nvclock.h U nvclock/src/backend/nvcontrol.c U nvclock/src/backend/nvreg.h U nvclock/src/backend/overclock.c U nvclock/src/backend/utils.c U nvclock/src/backend/w83781d.c U nvclock/src/backend/w83l785r.c U nvclock/src/backend/xf86i2c.c U nvclock/src/backend/xf86i2c.h U nvclock/src/backend/xfree.h U nvclock/src/gtk/.cvsignore U nvclock/src/gtk/Makefile.in U nvclock/src/gtk/banner.c U nvclock/src/gtk/banner.h U nvclock/src/gtk/banner_gl.h U nvclock/src/gtk/banner_hw.h U nvclock/src/gtk/gl.c U nvclock/src/gtk/gl.h U nvclock/src/gtk/hw.c U nvclock/src/gtk/hw.h U nvclock/src/gtk/interface.h U nvclock/src/gtk/main.c U nvclock/src/gtk/settings.c U nvclock/src/gtk/settings.h U nvclock/src/nvcontrol/Makefile.in U nvclock/src/nvcontrol/libnvcontrol.c U nvclock/src/nvcontrol/libnvcontrol.h U nvclock/src/nvcontrol/nvcontrol.c U nvclock/src/nvcontrol/nvcontrol.h U nvclock/src/qt/.cvsignore U nvclock/src/qt/Makefile.in U nvclock/src/qt/links.xpm U nvclock/src/qt/main.cpp U nvclock/src/qt/nv.xpm U nvclock/src/qt/people.xpm U nvclock/src/qt/qt_nvclock.cpp U nvclock/src/qt/qt_nvclock.h U nvclock/src/qt/qt_nvclock.pro U nvclock/src/qt/qt_xfree.cpp U nvclock/src/qt/qt_xfree.h U nvclock/src/qt/x.xpm checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether make sets $(MAKE)... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for library containing getopt_long... none required checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking for pkg-config... /usr/bin/pkg-config checking for gtk+-2.0 >= 2.4.0... configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/backend/Makefile config.status: creating src/nvcontrol/Makefile config.status: creating src/qt/Makefile config.status: creating src/gtk/Makefile config.status: creating Makefile config.status: creating config.h config.status: executing default-1 commands NVClock build summary: ---------------------- - Commandline version enabled - NV-CONROL support disabled - GTK2 GUI disabled - QT GUI disabled make -C src all make[1]: Entering directory `/usr/local/src/nvclock/src' make[2]: Entering directory `/usr/local/src/nvclock/src/backend' gcc -O0 -I../.. -I../nvcontrol -c -o backend.o backend.c gcc -O0 -I../.. -I../nvcontrol -c -o bios.o bios.c gcc -O0 -I../.. -I../nvcontrol -c -o config.o config.c gcc -O0 -I../.. -I../nvcontrol -c -o error.o error.c gcc -O0 -I../.. -I../nvcontrol -c -o nv30.o nv30.c gcc -O0 -I../.. -I../nvcontrol -c -o nv40.o nv40.c gcc -O0 -I../.. -I../nvcontrol -c -o nv50.o nv50.c gcc -O0 -I../.. -I../nvcontrol -c -o info.o info.c gcc -O0 -I../.. -I../nvcontrol -c -o overclock.o overclock.c gcc -O0 -I../.. -I../nvcontrol -c -o utils.o utils.c gcc -O0 -I../.. -I../nvcontrol -c -o i2c.o i2c.c gcc -O0 -I../.. -I../nvcontrol -c -o xf86i2c.o xf86i2c.c gcc -O0 -I../.. -I../nvcontrol -c -o adt7473.o adt7473.c gcc -O0 -I../.. -I../nvcontrol -c -o f75375.o f75375.c gcc -O0 -I../.. -I../nvcontrol -c -o lm99.o lm99.c gcc -O0 -I../.. -I../nvcontrol -c -o w83781d.o w83781d.c gcc -O0 -I../.. -I../nvcontrol -c -o w83l785r.o w83l785r.c gcc -O0 -I../.. -I../nvcontrol -c -o libc_wrapper.o libc_wrapper.c gcc -O0 -I../.. -I../nvcontrol -c -o back_linux.o back_linux.c ar cru libbackend.a backend.o bios.o config.o error.o nv30.o nv40.o nv50.o info.o overclock.o utils.o i2c.o xf86i2c.o adt7473.o f75375.o lm99.o w83781d.o w83l785r.o libc_wrapper.o back_linux.o ranlib libbackend.a make[2]: Leaving directory `/usr/local/src/nvclock/src/backend' make[2]: Entering directory `/usr/local/src/nvclock/src/nvcontrol' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/usr/local/src/nvclock/src/nvcontrol' make[2]: Entering directory `/usr/local/src/nvclock/src/gtk' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/usr/local/src/nvclock/src/gtk' make[2]: Entering directory `/usr/local/src/nvclock/src/qt' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/usr/local/src/nvclock/src/qt' gcc -g -O2 -o nvclock nvclock.c -I./backend -I./nvcontrol -I.. -L./backend -lbackend gcc -g -O2 -o smartdimmer smartdimmer.c -I./backend -I./nvcontrol -I.. -L./backend -lbackend make[1]: Leaving directory `/usr/local/src/nvclock/src' installing ABOUT as /usr/local/share/doc//ABOUT installing AUTHORS as /usr/local/share/doc//AUTHORS installing ChangeLog as /usr/local/share/doc//ChangeLog installing FAQ as /usr/local/share/doc//FAQ installing README as /usr/local/share/doc//README mkdir -p /usr/local/share/man/man1 cp nvclock.1 /usr/local/share/man/man1 mkdir -p /usr/local/share/applications mkdir -p /usr/local/share/icons/hicolor/48x48/apps cp nvclock.desktop /usr/local/share/applications cp nvclock.png /usr/local/share/icons/hicolor/48x48/apps make -C src install make[1]: Entering directory `/usr/local/src/nvclock/src' make[2]: Entering directory `/usr/local/src/nvclock/src/backend' make[2]: Nothing to be done for `install'. make[2]: Leaving directory `/usr/local/src/nvclock/src/backend' make[2]: Entering directory `/usr/local/src/nvclock/src/nvcontrol' make[2]: Nothing to be done for `install'. make[2]: Leaving directory `/usr/local/src/nvclock/src/nvcontrol' make[2]: Entering directory `/usr/local/src/nvclock/src/gtk' make[2]: Nothing to be done for `install'. make[2]: Leaving directory `/usr/local/src/nvclock/src/gtk' make[2]: Entering directory `/usr/local/src/nvclock/src/qt' make[2]: Nothing to be done for `install'. make[2]: Leaving directory `/usr/local/src/nvclock/src/qt' mkdir -p /usr/local/bin /usr/bin/install -c -c nvclock /usr/local/bin/nvclock /usr/bin/install -c -c smartdimmer /usr/local/bin/smartdimmer make[1]: Leaving directory `/usr/local/src/nvclock/src'