[17179569.184000] Linux version 2.6.15-27-k7 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 02:35:20 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000000fffc000 (usable)
[17179569.184000]  BIOS-e820: 000000000fffc000 - 000000000ffff000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 255MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 65532
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 61436 pages, LIFO batch:15
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5e80
[17179569.184000] ACPI: RSDT (v001 ASUS   A7S333   0x42302e31 MSFT 0x31313031) @ 0x0fffc000
[17179569.184000] ACPI: FADT (v001 ASUS   A7S333   0x42302e31 MSFT 0x31313031) @ 0x0fffc0b2
[17179569.184000] ACPI: BOOT (v001 ASUS   A7S333   0x42302e31 MSFT 0x31313031) @ 0x0fffc030
[17179569.184000] ACPI: MADT (v001 ASUS   A7S333   0x42302e31 MSFT 0x31313031) @ 0x0fffc058
[17179569.184000] ACPI: DSDT (v001   ASUS A7S333   0x00001000 MSFT 0x0100000b) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xe408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:8 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[17179569.184000] Detected 1666.915 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.576000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.576000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.588000] Memory: 248300k/262128k available (2103k kernel code, 13212k reserved, 599k data, 332k init, 0k highmem)
[17179571.588000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.668000] Calibrating delay using timer specific routine.. 3335.54 BogoMIPS (lpj=6671090)
[17179571.668000] Security Framework v1.0.0 initialized
[17179571.668000] SELinux:  Disabled at boot.
[17179571.668000] Mount-cache hash table entries: 512
[17179571.668000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179571.668000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179571.668000] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
[17179571.668000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179571.668000] CPU: L2 Cache: 256K (64 bytes/line)
[17179571.668000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179571.668000] mtrr: v2.0 (20020519)
[17179571.668000] Enabling fast FPU save and restore... done.
[17179571.668000] Enabling unmasked SIMD FPU exception support... done.
[17179571.668000] Checking 'hlt' instruction... OK.
[17179571.684000] SMP alternatives: switching to UP code
[17179571.684000] checking if image is initramfs... it is
[17179572.332000] Freeing initrd memory: 6763k freed
[17179572.348000] ACPI: Looking for DSDT ... not found!
[17179572.352000] CPU0: AMD Athlon(TM) XP 2000+ stepping 01
[17179572.352000] Total of 1 processors activated (3335.54 BogoMIPS).
[17179572.352000] ENABLING IO-APIC IRQs
[17179572.352000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179572.496000] Brought up 1 CPUs
[17179572.496000] NET: Registered protocol family 16
[17179572.496000] EISA bus registered
[17179572.496000] ACPI: bus type pci registered
[17179572.496000] PCI: PCI BIOS revision 2.10 entry at 0xf19a0, last bus=1
[17179572.496000] PCI: Using configuration type 1
[17179572.496000] ACPI: Subsystem revision 20051216
[17179572.500000] ACPI: Interpreter enabled
[17179572.500000] ACPI: Using IOAPIC for interrupt routing
[17179572.500000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179572.500000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179572.500000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179572.500000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[17179572.500000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179572.500000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179572.500000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179572.500000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[17179572.500000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.500000] PCI: Probing PCI hardware (bus 00)
[17179572.500000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179572.504000] Enabling SiS 96x SMBus.
[17179572.504000] Boot video device is 0000:01:00.0
[17179572.504000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.544000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179572.552000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.552000] pnp: PnP ACPI init
[17179572.556000] pnp: PnP ACPI: found 15 devices
[17179572.556000] PnPBIOS: Disabled by ACPI PNP
[17179572.556000] PCI: Using ACPI for IRQ routing
[17179572.556000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179572.560000] pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
[17179572.560000] pnp: 00:01: ioport range 0xe480-0xe4ff has been reserved
[17179572.560000] pnp: 00:01: ioport range 0xe600-0xe61f has been reserved
[17179572.560000] pnp: 00:01: ioport range 0x480-0x48f has been reserved
[17179572.560000] pnp: 00:0e: ioport range 0x290-0x297 has been reserved
[17179572.560000] pnp: 00:0e: ioport range 0x500-0x507 has been reserved
[17179572.564000] PCI: Bridge: 0000:00:01.0
[17179572.564000]   IO window: disabled.
[17179572.564000]   MEM window: ef000000-efffffff
[17179572.564000]   PREFETCH window: fcf00000-febfffff
[17179572.564000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179572.564000] Simple Boot Flag at 0x3a set to 0x1
[17179572.564000] audit: initializing netlink socket (disabled)
[17179572.564000] audit(1160622755.560:1): initialized
[17179572.564000] VFS: Disk quotas dquot_6.5.1
[17179572.564000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.564000] Initializing Cryptographic API
[17179572.564000] io scheduler noop registered
[17179572.564000] io scheduler anticipatory registered
[17179572.564000] io scheduler deadline registered
[17179572.564000] io scheduler cfq registered
[17179572.564000] isapnp: Scanning for PnP cards...
[17179572.916000] isapnp: No Plug & Play device found
[17179572.932000] Real Time Clock Driver v1.12
[17179572.932000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179572.932000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179573.940000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.940000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.940000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179573.940000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.944000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.944000] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.944000] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.944000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.944000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.944000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.944000] mice: PS/2 mouse device common for all mice
[17179573.948000] EISA: Probing bus 0 at eisa.0
[17179573.948000] EISA: Detected 0 cards.
[17179573.948000] NET: Registered protocol family 2
[17179573.988000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179573.988000] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[17179573.988000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[17179573.988000] TCP: Hash tables configured (established 16384 bind 16384)
[17179573.988000] TCP reno registered
[17179573.988000] TCP bic registered
[17179573.988000] NET: Registered protocol family 1
[17179573.988000] NET: Registered protocol family 8
[17179573.988000] NET: Registered protocol family 20
[17179573.988000] Using IPI No-Shortcut mode
[17179573.988000] ACPI wakeup devices: 
[17179573.988000] PCI0 PCI1 PS2K USB0 USB1 MC97 
[17179573.988000] ACPI: (supports S0 S1 S3 S4 S5)
[17179573.988000] Freeing unused kernel memory: 332k freed
[17179574.048000] vga16fb: initializing
[17179574.048000] vga16fb: mapped to 0xc00a0000
[17179574.104000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.188000] Console: switching to colour frame buffer device 80x25
[17179574.188000] fb0: VGA16 VGA frame buffer device
[17179575.260000] Capability LSM initialized
[17179576.092000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[17179576.092000] SIS5513: chipset revision 208
[17179576.092000] SIS5513: not 100% native mode: will probe irqs later
[17179576.092000] SIS5513: SiS745 ATA 100 (2nd gen) controller
[17179576.092000]     ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
[17179576.092000]     ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
[17179576.092000] Probing IDE interface ide0...
[17179576.380000] hda: Maxtor 4D060H3, ATA DISK drive
[17179576.660000] hdb: WDC WD400BB-00DEA0, ATA DISK drive
[17179576.716000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.752000] Probing IDE interface ide1...
[17179577.040000] hdc: SAMSUNG SV0844A, ATA DISK drive
[17179577.320000] hdd: Maxtor 90845U3, ATA DISK drive
[17179577.376000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.388000] hda: max request size: 128KiB
[17179577.404000] hda: 120069936 sectors (61475 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179577.404000] hda: cache flushes not supported
[17179577.404000]  hda: hda1 hda2
[17179577.444000] hdb: max request size: 128KiB
[17179577.444000] hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179577.444000] hdb: cache flushes not supported
[17179577.444000]  hdb: hdb1 hdb2 hdb3
[17179577.468000] hdc: max request size: 128KiB
[17179577.468000] hdc: 16514064 sectors (8455 MB) w/220KiB Cache, CHS=16383/16/63, UDMA(33)
[17179577.468000] hdc: cache flushes not supported
[17179577.468000]  hdc: hdc1
[17179577.480000] hdd: max request size: 128KiB
[17179577.480000] hdd: 16514064 sectors (8455 MB) w/2048KiB Cache, CHS=16383/16/63, UDMA(66)
[17179577.480000] hdd: cache flushes not supported
[17179577.480000]  hdd: hdd1
[17179577.536000] hdc: status error: status=0x00 { }
[17179577.536000] ide: failed opcode was: unknown
[17179577.536000] hdc: drive not ready for command
[17179577.536000] hdc: status error: status=0x00 { }
[17179577.536000] ide: failed opcode was: unknown
[17179577.536000] hdc: drive not ready for command
[17179577.536000] hdc: status error: status=0x00 { }
[17179577.536000] ide: failed opcode was: unknown
[17179577.536000] hdc: drive not ready for command
[17179577.536000] hdc: status error: status=0x00 { }
[17179577.536000] ide: failed opcode was: unknown
[17179577.536000] hdc: DMA disabled
[17179577.536000] hdd: DMA disabled
[17179577.536000] hdc: drive not ready for command
[17179577.584000] ide1: reset: success
[17179577.680000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179577.680000] ide: failed opcode was: unknown
[17179577.680000] hdc: drive not ready for command
[17179577.764000] hdc: status error: status=0x00 { }
[17179577.764000] ide: failed opcode was: unknown
[17179577.764000] hdc: drive not ready for command
[17179577.764000] hdc: status error: status=0x00 { }
[17179577.764000] ide: failed opcode was: unknown
[17179577.764000] hdc: drive not ready for command
[17179577.764000] hdc: status error: status=0x00 { }
[17179577.764000] ide: failed opcode was: unknown
[17179577.764000] hdc: drive not ready for command
[17179577.764000] hdc: status error: status=0x00 { }
[17179577.764000] ide: failed opcode was: unknown
[17179577.764000] hdc: drive not ready for command
[17179577.812000] ide1: reset: success
[17179577.912000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179577.912000] ide: failed opcode was: unknown
[17179577.912000] hdc: drive not ready for command
[17179578.016000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179578.016000] ide: failed opcode was: unknown
[17179578.016000] hdc: drive not ready for command
[17179578.100000] hdc: status error: status=0x00 { }
[17179578.100000] ide: failed opcode was: unknown
[17179578.100000] hdc: drive not ready for command
[17179578.100000] hdc: status error: status=0x00 { }
[17179578.100000] ide: failed opcode was: unknown
[17179578.100000] hdc: drive not ready for command
[17179578.100000] hdc: status error: status=0x00 { }
[17179578.100000] ide: failed opcode was: unknown
[17179578.100000] hdc: drive not ready for command
[17179578.100000] hdc: status error: status=0x00 { }
[17179578.100000] ide: failed opcode was: unknown
[17179578.100000] hdc: drive not ready for command
[17179578.148000] ide1: reset: success
[17179578.244000] hdc: status error: status=0x00 { }
[17179578.244000] ide: failed opcode was: unknown
[17179578.244000] hdc: drive not ready for command
[17179578.244000] hdc: status error: status=0x00 { }
[17179578.244000] ide: failed opcode was: unknown
[17179578.244000] hdc: drive not ready for command
[17179578.244000] hdc: status error: status=0x00 { }
[17179578.244000] ide: failed opcode was: unknown
[17179578.244000] hdc: drive not ready for command
[17179578.244000] hdc: status error: status=0x00 { }
[17179578.244000] ide: failed opcode was: unknown
[17179578.244000] hdc: drive not ready for command
[17179578.292000] ide1: reset: success
[17179578.564000] usbcore: registered new driver usbfs
[17179578.564000] usbcore: registered new driver hub
[17179578.568000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179578.568000] ACPI: PCI Interrupt 0000:00:02.2[D] -> GSI 19 (level, low) -> IRQ 177
[17179578.568000] ohci_hcd 0000:00:02.2: OHCI Host Controller
[17179578.584000] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[17179578.584000] ohci_hcd 0000:00:02.2: irq 177, io mem 0xee800000
[17179578.640000] hub 1-0:1.0: USB hub found
[17179578.640000] hub 1-0:1.0: 3 ports detected
[17179578.744000] ACPI: PCI Interrupt 0000:00:02.3[A] -> GSI 23 (level, low) -> IRQ 185
[17179578.744000] ohci_hcd 0000:00:02.3: OHCI Host Controller
[17179578.760000] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
[17179578.760000] ohci_hcd 0000:00:02.3: irq 185, io mem 0xee000000
[17179578.816000] hub 2-0:1.0: USB hub found
[17179578.816000] hub 2-0:1.0: 3 ports detected
[17179579.048000] usb 1-1: new low speed USB device using ohci_hcd and address 2
[17179579.048000] Attempting manual resume
[17179579.092000] EXT3-fs: mounted filesystem with ordered data mode.
[17179579.100000] kjournald starting.  Commit interval 5 seconds
[17179579.568000] usb 1-2: new full speed USB device using ohci_hcd and address 3
[17179580.076000] usb 2-1: new low speed USB device using ohci_hcd and address 2
[17179587.152000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179587.152000] ide: failed opcode was: unknown
[17179587.152000] hdc: drive not ready for command
[17179587.232000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179587.232000] ide: failed opcode was: unknown
[17179587.232000] hdc: drive not ready for command
[17179588.832000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179588.832000] ide: failed opcode was: unknown
[17179588.832000] hdc: drive not ready for command
[17179589.372000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179589.372000] ide: failed opcode was: unknown
[17179589.372000] hdc: drive not ready for command
[17179590.108000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179590.156000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.176000] Linux agpgart interface v0.101 (c) Dave Jones
[17179590.188000] agpgart: Detected SiS 745 chipset
[17179590.196000] agpgart: AGP aperture is 64M @ 0xf0000000
[17179590.256000] i2c-sis96x version 1.0.0
[17179590.256000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
[17179590.272000] Linux video capture interface: v1.00
[17179590.296000] sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not inserted.
[17179590.564000] ivtv:  ==================== START INIT IVTV ====================
[17179590.564000] ivtv:  version 0.4.7 (tagged release) loading
[17179590.564000] ivtv:  Linux version: 2.6.15-27-k7 SMP preempt K7 gcc-4.0
[17179590.564000] ivtv:  In case of problems please include the debug info between
[17179590.564000] ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
[17179590.564000] ivtv:  any module options, when mailing the ivtv-users mailinglist.
[17179590.564000] ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
[17179590.564000] PCI: Enabling device 0000:00:08.0 (0014 -> 0016)
[17179590.564000] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179590.564000] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[17179590.652000] tveeprom: ivtv version
[17179590.652000] tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 8289262
[17179590.652000] tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
[17179590.652000] tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
[17179590.652000] tveeprom: audio processor = MSP4448 (type = 1b)
[17179590.652000] tveeprom: decoder processor = SAA7115 (type = 13)
[17179590.652000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
[17179590.720000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
[17179590.720000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
[17179590.868000] saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
[17179590.968000] ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
[17179590.996000] usbcore: registered new driver hiddev
[17179591.008000] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input1
[17179591.016000] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.2-1
[17179591.032000] input: Microsoft SideWinder Game Pad Pro USB version 1.0 as /class/input/input2
[17179591.036000] input: USB HID v1.00 Gamepad [Microsoft SideWinder Game Pad Pro USB version 1.0] on usb-0000:00:02.3-1
[17179591.036000] usbcore: registered new driver usbhid
[17179591.036000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179591.396000] saa7127 1-0044: ivtv driver
[17179591.400000] saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
[17179591.400000] ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
[17179591.448000] drivers/usb/media/ov511/ov511.c: USB OV511 video device found
[17179591.460000] drivers/usb/media/ov511/ov511.c: model: Creative Labs WebCam 3
[17179591.476000] parport: PnPBIOS parport detected.
[17179591.476000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179591.500000] Floppy drive(s): fd0 is 1.44M
[17179591.508000] Linux Tulip driver version 1.1.13 (December 15, 2004)
[17179591.520000] FDC 0 is a post-1991 82077
[17179591.544000] msp3400 1-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio mode=simpler
[17179591.548000] ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40]
[17179591.548000] msp3400 1-0040: msp34xxg daemon started
[17179591.616000] ts: Compaq touchscreen protocol output
[17179591.640000] input: PC Speaker as /class/input/input3
[17179591.712000] tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
[17179591.712000] ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
[17179591.832000] PCI: Enabling device 0000:00:05.0 (0084 -> 0085)
[17179591.832000] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 201
[17179592.112000] drivers/usb/media/ov511/ov511.c: Sensor is an OV7610
[17179592.440000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[17179592.476000] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
[17179592.700000] ivtv0: Encoder revision: 0x02050032
[17179592.708000] ivtv0: Decoder revision: 0x02020023
[17179592.708000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
[17179592.708000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
[17179592.708000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
[17179592.708000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
[17179592.708000] ivtv0: Create encoder radio stream
[17179592.708000] ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
[17179592.708000] ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
[17179592.712000] ivtv0: Create decoder VOUT stream
[17179592.712000] ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total)
[17179592.768000] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
[17179592.868000] drivers/usb/media/ov511/ov511.c: Device at usb-0000:00:02.2-2 registered to minor 1
[17179592.868000] usbcore: registered new driver ov511
[17179592.868000] drivers/usb/media/ov511/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver
[17179592.876000] tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
[17179592.976000] ivtv0: Initialized WinTV PVR 350, card #0
[17179592.976000] ivtv:  ====================  END INIT IVTV  ====================
[17179592.984000] PCI: Enabling device 0000:00:0a.0 (0014 -> 0017)
[17179592.984000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 209
[17179592.984000] tulip0:  MII transceiver #1 config 1000 status 786d advertising 01e1.
[17179592.988000] eth0: ADMtek Comet rev 17 at 0001a800, 00:03:6D:1C:E5:F5, IRQ 209.
[17179593.624000] lp0: using parport0 (interrupt-driven).
[17179593.752000] it87: Found IT8705F chip at 0x290, revision 2
[17179593.752000] it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface
[17179593.820000] Adding 1052248k swap on /dev/hda2.  Priority:-1 extents:1 across:1052248k
[17179593.972000] EXT3 FS on hda1, internal journal
[17179594.196000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179594.196000] md: bitmap version 4.39
[17179594.868000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179595.012000] APIC error on CPU0: 00(02)
[17179595.280000] APIC error on CPU0: 02(02)
[17179595.556000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179595.556000] ide: failed opcode was: unknown
[17179595.556000] hdc: drive not ready for command
[17179595.664000] APIC error on CPU0: 02(02)
[17179595.744000] APIC error on CPU0: 02(02)
[17179596.012000] APIC error on CPU0: 02(02)
[17179596.044000] APIC error on CPU0: 02(02)
[17179596.260000] 0000:00:0a.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972117)
[17179596.260000] eth1: Setting full-duplex based on MII#1 link partner capability of 45e1.
[17179596.412000] APIC error on CPU0: 02(02)
[17179596.488000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179596.488000] ide: failed opcode was: unknown
[17179596.488000] hdc: drive not ready for command
[17179596.508000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179596.508000] ide: failed opcode was: unknown
[17179596.508000] hdc: drive not ready for command
[17179596.576000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179596.576000] ide: failed opcode was: unknown
[17179596.576000] hdc: drive not ready for command
[17179596.660000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179596.660000] ide: failed opcode was: unknown
[17179596.660000] hdc: drive not ready for command
[17179596.716000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179596.716000] ide: failed opcode was: unknown
[17179596.716000] hdc: drive not ready for command
[17179596.764000] hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[17179596.764000] ide: failed opcode was: unknown
[17179596.764000] hdc: drive not ready for command
[17179596.768000] hdc: status error: status=0x00 { }
[17179596.768000] ide: failed opcode was: unknown
[17179596.768000] hdc: drive not ready for command
[17179596.768000] hdc: status error: status=0x00 { }
[17179596.768000] ide: failed opcode was: unknown
[17179596.768000] hdc: drive not ready for command
[17179596.768000] hdc: status error: status=0x00 { }
[17179596.768000] ide: failed opcode was: unknown
[17179596.768000] hdc: drive not ready for command
[17179596.768000] hdc: status error: status=0x00 { }
[17179596.768000] ide: failed opcode was: unknown
[17179596.768000] hdc: drive not ready for command
[17179596.816000] ide1: reset: success
[17179596.848000] APIC error on CPU0: 02(02)
[17179597.504000] NET: Registered protocol family 10
[17179597.504000] lo: Disabled Privacy Extensions
[17179597.504000] IPv6 over IPv4 tunneling driver
[17179597.636000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179597.708000] NTFS volume version 3.1.
[17179597.744000] kjournald starting.  Commit interval 5 seconds
[17179597.744000] EXT3 FS on hdb2, internal journal
[17179597.744000] EXT3-fs: mounted filesystem with ordered data mode.
[17179597.796000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179597.840000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179599.416000] APIC error on CPU0: 02(02)
[17179600.432000] NET: Registered protocol family 17
[17179601.836000] APIC error on CPU0: 02(02)
[17179603.168000] APIC error on CPU0: 02(02)