# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

#Section "ServerLayout"
#	Identifier     "Default Layout"
#        Screen  	"Dual Screen"
#	Screen      0  "aticonfig-Screen[0]" 0 0
#        #Monitor         "Standardbildschirm"
#	Monitor    "aticonfig-Monitor[0]"
 #       DefaultDepth    24

 #       SubSection "Display"
 #               Depth           24
 #               Modes           "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
 #       EndSubSection
#	InputDevice    "Generic Keyboard"
#	InputDevice    "Configured Mouse"
#	InputDevice    "stylus" "SendCoreEvents"
#	InputDevice    "cursor" "SendCoreEvents"
#	InputDevice    "eraser" "SendCoreEvents"
#	InputDevice    "Synaptics Touchpad"
#EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "no"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
	Identifier  "Synaptics Touchpad"
	Driver      "synaptics"
	Option	    "SendCoreEvents" "true"
	Option	    "Device" "/dev/psaux"
	Option	    "Protocol" "auto-dev"
	Option	    "HorizScrollDelta" "0"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Generic Monitor"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

#Section "Device"
#	Identifier  "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
#	Driver      "ati"
#	BusID       "PCI:1:0:0"
#EndSection

#Section "Device"
#	Identifier  "aticonfig-Device[0]"
#	Driver      "fglrx"
#	Option	    "VideoOverlay" "on"
#	Option	    "OpenGLOverlay" "off"
#EndSection

#Section "Screen"
#	Identifier "Default Screen"
#	Device     "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
#	Monitor    "Generic Monitor"
#	DefaultDepth     24
#	SubSection "Display"
#		Depth     1
#		Modes    "1400x1050"
#	EndSubSection
#	SubSection "Display"
#		Depth     4
#		Modes    "1400x1050"
#	EndSubSection
#	SubSection "Display"
#		Depth     8
#		Modes    "1400x1050"
#	EndSubSection
#	SubSection "Display"
#		Depth     15
#		Modes    "1400x1050"
#	EndSubSection
#	SubSection "Display"
#		Depth     16
#		Modes    "1400x1050"
#	EndSubSection
#	SubSection "Display"
#		Depth     24
#		Modes    "1400x1050"
#	EndSubSection
#EndSection

#Section "Screen"
#	Identifier "aticonfig-Screen[0]"
#	Device     "aticonfig-Device[0]"
#	Monitor    "aticonfig-Monitor[0]"
#	DefaultDepth     24
#	SubSection "Display"
#		Viewport   0 0
#		Depth     24
#	EndSubSection
#EndSection




Section "DRI"
	Mode         0666
EndSection

 Section "Device"
        Identifier      "Single ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
        Driver          "fglrx"
        BusID           "PCI:1:0:0"
  EndSection

  Section "Device"
        Identifier      "Cloned ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
        Driver          "fglrx"
        BusID           "PCI:1:0:0"

        ## here the needed values for 'Cloned' are starting:
        Option "AGPMode" "4"
        Option "AGPFastWrite" "true"
        Option "BusType" "PCIE"
        Option "MonitorLayout" "LVDS, CRT"
        Option "MergedFB" "true"
        Option "CRT2HSync" "31.0-80.0"
        Option "CRT2VRefresh" "60.0-76.0"
        Option "CRT2Position" "Clone"
        Option "MetaModes" "1920x1200 1600x1200 1400x1050 1280x1024 1024x768 640x480"
        Option "PanelOff" "false"
        Option "DynamicClocks" "true"

        ## Change this to "false" if there are any problems:
        Option "EnablePageFlip" "true"
  EndSection

  Section "Device"
        Identifier      "Dual ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
        Driver      "fglrx"
        BusID           "PCI:1:0:0"

        ## here the needed values for 'Dual' are starting:
        Option "AGPMode" "4"
        Option "AGPFastWrite" "true"
        Option "BusType" "PCIE"
        Option "MonitorLayout" "LVDS, CRT"
        Option "MergedFB" "true"
        Option "CRT2HSync" "31.0-80.0"
        Option "CRT2VRefresh" "60.0-76.0"
        Option "CRT2Position" "RightOf"
        Option "MetaModes" "1920x1200-1600x1200"
        Option "PanelOff" "false"
        Option "DynamicClocks" "true"

        ## Change this to "false" if there are any problems:
        Option "EnablePageFlip" "true"
  EndSection


Section "Screen"
        Identifier      "Single Screen"
        Device          "Single ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
       # Monitor         "Standardbildschirm"
	Monitor    "aticonfig-Monitor[0]"
        DefaultDepth    24

        SubSection "Display"
                Depth           24
                Modes           "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection
   EndSection

   Section "Screen"
        Identifier      "Cloned Screen"
        Device          "Cloned ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
 #       Monitor         "Standardbildschirm"
	Monitor    "aticonfig-Monitor[0]"
        DefaultDepth    24

        SubSection "Display"
                Depth           24
                Modes           "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection
   EndSection

   Section "Screen"
        Identifier      "Dual Screen"
        Device          "Dual ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
        #Monitor         "Standardbildschirm"
	Monitor    "aticonfig-Monitor[0]"
        DefaultDepth    24

        SubSection "Display"
                Depth           24
                Modes           "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection
   EndSection

Section "ServerLayout"
      Identifier      "Default Layout"

      ## Choose one out of three
        #Screen "Single Screen"
        #Screen "Cloned Screen"
        Screen  "Dual Screen"
      ## End of chooser

       InputDevice     "Generic Keyboard"
       InputDevice     "Configured Mouse"
        InputDevice     "Synaptics Touchpad"
 EndSection