smartctl 5.40 2010-10-16 r3189 [FreeBSD 8.1-RELEASE i386] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K160 Device Model: Hitachi HDS721680PLAT80 Serial Number: PV6804Z31RA1GN Firmware Version: P21OA8BA User Capacity: 80,026,361,856 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1 Local Time is: Tue Nov 16 00:04:55 2010 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (1445) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 24) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 095 095 016 Pre-fail Always - 196620 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 172 172 024 Pre-fail Always - 67 (Average 165) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 394 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 24523 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 394 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1415 193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1415 194 Temperature_Celsius 0x0002 150 150 000 Old_age Always - 40 (Min/Max 20/58) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 166 166 000 Old_age Always - 1080 SMART Error Log Version: 1 Warning: ATA error count 65535 inconsistent with error log pointer 1 ATA Error Count: 65535 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 65535 occurred at disk power-on lifetime: 24523 hours (1021 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 7e 58 00 f0 Error: ICRC, ABRT at LBA = 0x0000587e = 22654 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 c0 bf 57 00 f0 00 00:09:49.900 WRITE DMA ca 00 c0 bf 57 00 f0 00 00:09:49.900 WRITE DMA ca 00 c0 bf 57 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA Error 65534 occurred at disk power-on lifetime: 24523 hours (1021 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 7e 58 00 f0 Error: ICRC, ABRT at LBA = 0x0000587e = 22654 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 c0 bf 57 00 f0 00 00:09:49.900 WRITE DMA ca 00 c0 bf 57 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA Error 65533 occurred at disk power-on lifetime: 24523 hours (1021 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 7e 58 00 f0 Error: ICRC, ABRT at LBA = 0x0000587e = 22654 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 c0 bf 57 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 55 00 f0 00 00:09:49.800 WRITE DMA Error 65532 occurred at disk power-on lifetime: 24523 hours (1021 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 be 57 00 f0 Error: ICRC, ABRT at LBA = 0x000057be = 22462 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 55 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 55 00 f0 00 00:09:49.800 WRITE DMA Error 65531 occurred at disk power-on lifetime: 24523 hours (1021 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 be 57 00 f0 Error: ICRC, ABRT at LBA = 0x000057be = 22462 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 56 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 55 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 55 00 f0 00 00:09:49.800 WRITE DMA ca 00 00 bf 55 00 f0 00 00:09:49.800 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 24523 - # 2 Short offline Completed without error 00% 24523 - # 3 Extended offline Completed without error 00% 23535 - # 4 Short offline Completed without error 00% 23535 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.