PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:0e.0 IO window: c000-cfff MEM window: e4000000-e4ffffff PREFETCH window: 30000000-300fffff PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered Real Time Clock Driver v1.12ac Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0) Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: AGP aperture is 32M @ 0xe0000000 [drm] Initialized drm 1.0.1 20051102 vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 5120k, total 262144k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fbsplash: console 0 using theme 'ThinkLinux' fbsplash: switched splash state to 'on' on console 0 fb0: VESA VGA frame buffer device ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (40 C) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 GSI 16 sharing vector 0xB1 and IRQ 16 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 177 PCI: Setting latency timer of device 0000:00:05.0 to 64 input: AT Translated Set 2 keyboard as /class/input/input0 logips2pp: Detected unknown logitech mouse model 90 eth0: forcedeth.c: subsystem: 010de:0c11 bound to 0000:00:05.0 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 GSI 17 sharing vector 0xB9 and IRQ 17 ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 185 eth1: Davicom DM9102 at pci0000:02:0b.0, 00:80:ad:81:b1:36, irq 185. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 NFORCE3-250: chipset revision 162 NFORCE3-250: not 100% native mode: will probe irqs later NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... input: ImExPS/2 Logitech Explorer Mouse as /class/input/input1 hda: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache libata version 1.20 loaded. sata_nv 0000:00:09.0: version 0.8 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 GSI 18 sharing vector 0xC1 and IRQ 18 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 21 (level, high) -> IRQ 193 PCI: Setting latency timer of device 0000:00:09.0 to 64 ata1: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xDB00 irq 193 ata2: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xDB08 irq 193 ata1: SATA link up 1.5 Gbps (SStatus 113) ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c68 86:3e01 87:4003 88:407f ata1: dev 0 ATA-7, max UDMA/133, 320173056 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device removed ata1: dev 0 configured for UDMA/133 scsi0 : sata_nv ata2: SATA link down (SStatus 0) scsi1 : sata_nv Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 GSI 19 sharing vector 0xC9 and IRQ 19 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 20 (level, high) -> IRQ 201 PCI: Setting latency timer of device 0000:00:0a.0 to 64 ata3: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE100 irq 201 ata4: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE108 irq 201 ata3: SATA link down (SStatus 0) scsi2 : sata_nv ata4: SATA link down (SStatus 0) scsi3 : sata_nv SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 177 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: irq 177, io mem 0xe5005000 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 193 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 193, io mem 0xe5003000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 201 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 201, io mem 0xe5004000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v3.0 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver i2c /dev entries driver i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' ReiserFS: sda3: found reiserfs format "3.6" with standard journal ReiserFS: sda3: using ordered data mode ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda3: checking transaction log (sda3) ReiserFS: sda3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 884k freed ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) wlan: 0.8.4.2 (0.9.2) ath_rate_amrr: 0.1 (0.9.2) ath_pci: 0.9.4.5 (0.9.2) ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 GSI 20 sharing vector 0xD1 and IRQ 20 ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 209 wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 5.6 phy 4.1 radio 1.7 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5212: mem=0xe4040000, irq=209 ReiserFS: sda4: found reiserfs format "3.6" with standard journal ReiserFS: sda4: using ordered data mode ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda4: checking transaction log (sda4) ReiserFS: sda4: Using r5 hash to sort names Adding 136544k swap on /dev/sda2. Priority:-1 extents:1 across:136544k fbsplash: console 1 using theme 'ThinkLinux' fbsplash: switched splash state to 'on' on console 1 fbsplash: console 2 using theme 'ThinkLinux' fbsplash: switched splash state to 'on' on console 2 fbsplash: console 3 using theme 'ThinkLinux' fbsplash: switched splash state to 'on' on console 3 fbsplash: console 4 using theme 'ThinkLinux' fbsplash: switched splash state to 'on' on console 4 fbsplash: console 5 using theme 'ThinkLinux' fbsplash: switched splash state to 'on' on console 5 fbsplash: console 8 using theme 'ThinkLinux' fbsplash: switched splash state to 'on' on console 8 fbsplash: console 9 using theme 'ThinkLinux' fbsplash: switched splash state to 'on' on console 9 fbsplash: console 10 using theme 'ThinkLinux' fbsplash: switched splash state to 'on' on console 10 fbsplash: console 11 using theme 'livecd-2005.1' fbsplash: switched splash state to 'on' on console 11 eth0: Promiscuous mode enabled. device eth0 entered promiscuous mode eth0: Promiscuous mode enabled. device ath0 entered promiscuous mode br0: port 2(ath0) entering learning state br0: port 1(eth0) entering learning state ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 GSI 21 sharing vector 0xD9 and IRQ 21 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 217 NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9625 Thu Sep 14 15:31:20 PDT 2006 agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 177 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 54606 usecs intel8x0: clocking to 46945 br0: topology change detected, propagating br0: port 2(ath0) entering forwarding state br0: topology change detected, propagating br0: port 1(eth0) entering forwarding state