Linux version 2.6.9-5.0.5ts (machbuild@minbar.tinysofa.org) (gcc version 3.4.3 20050209 (tinysofa 3.4.3-19ts)) #1 Thu Apr 21 10:27:59 EDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bef0000 (usable) BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS) BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 62MB HIGHMEM available. 896MB LOWMEM available. zapping low mappings. On node 0 totalpages: 245488 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 16112 pages, LIFO batch:3 DMI 2.3 present. ACPI: RSDP (v000 ATi ) @ 0x000f7ed0 ACPI: RSDT (v001 ATi AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef3040 ACPI: FADT (v001 ATi AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef30c0 ACPI: MCFG (v001 ATi AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef6a80 ACPI: MADT (v001 ATi AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef6980 ACPI: SSDT (v001 ATI Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x3bef6b00 ACPI: SSDT (v001 ATI CpuPm 0x00003000 INTL 0x20040311) @ 0x3bef6f90 ACPI: DSDT (v001 ATI AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Kernel command line: ro root=LABEL=/ Initializing CPU#0 CPU 0 irqstacks, hard=c03e1000 soft=c03e0000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 3002.978 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 969040k/981952k available (2083k kernel code, 12260k reserved, 655k data, 168k init, 64448k highmem) Calibrating delay loop... 5898.24 BogoMIPS (lpj=2949120) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Edge set to Level Trigger. checking if image is initramfs... it is Freeing initrd memory: 485k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 3.00 entry at 0xf1df0, last bus=2 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *12 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11), disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKG] disabled and referenced, BIOS bug. ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11 PCI: Cannot allocate resource region 3 of device 0000:00:00.0 TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1160759452.623:0): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 2FDFD220DA5F147C - User ID: tinysofa (kernel module gpg key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1, 8 throttling states) ACPI: Thermal Zone [THRM] (40 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones irq 12: nobody cared! (screaming interrupt?) irq 12: Please try booting with acpi=off and report a bug [] __report_bad_irq+0x27/0xa0 [] note_interrupt+0x92/0x140 [] handle_IRQ_event+0x34/0x70 [] do_IRQ+0xe5/0x110 [] common_interrupt+0x18/0x20 [] __do_softirq+0x2d/0x90 [] do_softirq+0x4f/0x5e ======================= [] do_IRQ+0xec/0x110 [] common_interrupt+0x18/0x20 [] setup_irq+0x7c/0xc0 [] i8042_interrupt+0x0/0x190 [] request_irq+0x7d/0xd0 [] platform_device_release_simple+0x0/0x10 [] platform_device_register_simple+0x83/0x100 [] i8042_check_aux+0x27/0x140 [] i8042_init+0x106/0x190 [] do_initcalls+0x53/0xc0 [] init+0x0/0x130 [] init+0x0/0x130 [] init+0x25/0x130 [] kernel_thread_helper+0x0/0x18 [] kernel_thread_helper+0x5/0x18 handlers: [] (i8042_interrupt+0x0/0x190) Disabling IRQ #12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: ASUS CD-S520/A5, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... hdc: ST3802110A, ATA DISK drive Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 1024KiB hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63 hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 hda: ATAPI 52X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice irq 12: nobody cared! (screaming interrupt?) irq 12: Please try booting with acpi=off and report a bug [] __report_bad_irq+0x27/0xa0 [] note_interrupt+0x92/0x140 [] handle_IRQ_event+0x34/0x70 [] do_IRQ+0xe5/0x110 [] common_interrupt+0x18/0x20 [] __do_softirq+0x2d/0x90 [] do_softirq+0x4f/0x5e ======================= [] do_IRQ+0xec/0x110 [] common_interrupt+0x18/0x20 [] setup_irq+0x7c/0xc0 [] i8042_interrupt+0x0/0x190 [] request_irq+0x7d/0xd0 [] sysfs_make_dirent+0x1d/0x90 [] i8042_open+0x59/0xe0 [] serio_open+0x15/0x30 [] atkbd_connect+0x192/0x430 [] driver_create_file+0x44/0x60 [] driver_add_attrs+0x4c/0xc0 [] serio_bind_driver+0x23/0x90 [] serio_connect_port+0x2c/0x150 [] driver_register+0x28/0x30 [] serio_register_driver+0x99/0xc0 [] atkbd_init+0xa/0x10 [] do_initcalls+0x53/0xc0 [] init+0x0/0x130 [] init+0x0/0x130 [] init+0x25/0x130 [] kernel_thread_helper+0x0/0x18 [] kernel_thread_helper+0x5/0x18 handlers: [] (i8042_interrupt+0x0/0x190) Disabling IRQ #12 input: AT Translated Set 2 keyboard on isa0060/serio0 irq 12: nobody cared! (screaming interrupt?) irq 12: Please try booting with acpi=off and report a bug [] __report_bad_irq+0x27/0xa0 [] note_interrupt+0x92/0x140 [] handle_IRQ_event+0x34/0x70 [] do_IRQ+0xe5/0x110 [] common_interrupt+0x18/0x20 [] __do_softirq+0x2d/0x90 [] do_softirq+0x4f/0x5e ======================= [] do_IRQ+0xec/0x110 [] common_interrupt+0x18/0x20 [] setup_irq+0x7c/0xc0 [] i8042_interrupt+0x0/0x190 [] request_irq+0x7d/0xd0 [] i8042_open+0x59/0xe0 [] serio_open+0x15/0x30 [] psmouse_connect+0xee/0x300 [] driver_create_file+0x44/0x60 [] driver_add_attrs+0x4c/0xc0 [] serio_bind_driver+0x23/0x90 [] serio_connect_port+0x2c/0x150 [] driver_register+0x28/0x30 [] serio_bind_driver+0x4f/0x90 [] serio_register_driver+0x99/0xc0 [] psmouse_init+0x44/0xb0 [] serio_register_driver+0x99/0xc0 [] do_initcalls+0x53/0xc0 [] init+0x0/0x130 [] init+0x0/0x130 [] init+0x25/0x130 [] kernel_thread_helper+0x0/0x18 [] kernel_thread_helper+0x5/0x18 handlers: [] (i8042_interrupt+0x0/0x190) Disabling IRQ #12 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Invalid control/status registers speedstep-centrino: found unsupported CPU with Enhanced SpeedStep: send /proc/cpuinfo to Jeremy Fitzhardinge cpufreq: CPU0 - ACPI performance management activated. cpufreq: *P0: 3000 MHz, 22464 mW, 160 uS cpufreq: P1: 2800 MHz, 22464 mW, 160 uS ACPI: (supports S0 S3 S4 S5) ACPI wakeup devices: PCI0 USB0 USB1 USB2 AZAL P2P PS2K Freeing unused kernel memory: 168k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. ACPI: Power Button (FF) [PWRF] ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: irq 11, pci mem f8822000 ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: irq 11, pci mem f8828000 ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: irq 11, pci mem f882a000 ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. EXT3 FS on hdc2, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. cdrom: open failed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Adding 1959920k swap on /dev/hdc3. Priority:-1 extents:1 cdrom: open failed. Losing some ticks... checking if CPU frequency changed. kjournald starting. Commit interval 5 seconds EXT3 FS on hdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Losing some ticks... checking if CPU frequency changed.