thanks a lot
now I am not sure that my card is not work well.
 Do you have E400P card?
the configure file is attachment.
I think the hardware is not work well
2M line is ok.I have connect the line to CISOC as5300,the line is ok
thanks a lot
==============================================================
[root@gateway ~]# uname -a
Linux gateway 2.6.9-1.667 #1 Tue Nov 2 14:41:25 EST 2004 i686 i686 i386 GNU/Linux
==============================================================
#dmesg
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 7 (level, low) -> IRQ 7
Detected Tormenta 2 Quad T1/PRI or E1/PRA at 0xe2044000/0xe2045000 irq 7
Xilinx Chip successfully loaded, configured and started!!
Tormenta 2 Quad E1/PRA Card
Detected Card number: 0
Tor2: Launching card: 0
Registered Tormenta2 PCI
Registered tone zone 4 (United Kingdom)

==============================================================
[root@gateway ~]# ztcfg -v

Zaptel Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

62 channels configured.
==============================================================
# zttool

  Current Alarms:     No alarms.   
  Sync Source:        Tormenta 2 (PCI) Quad E1 Car 
  IRQ Misses:               0    
  Bipolar Viol:             0   
  Tx/Rx Levels:         0/  0
   Total/Conf/Act: 456  31/ 31/  0012    
   Tx          1111111111222222222333
  Tx 1234567890123456789012345789012 
  TxA ------------------------------
==============================================================

 ./pritest /dev/zap/16
Sending Set Asynchronous Balanced Mode Extended

> [ 00 01 7f ]

> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode extended) ]
> 0 bytes of data
Sending Set Asynchronous Balanced Mode Extended

> [ 00 01 7f ]

> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode extended) ]
> 0 bytes of data

==============================================================
asterisk -vvvvgc
CTI> tmp is nullAug 15 20:53:03 NOTICE[4562]: app_dial.c:764 dial_exec: Unable to create channel of type 'Zap'
  == Everyone is busy/congested at this time
    -- Executing Hangup("SIP/2003-40ea", "") in new stack
  == Spawn extension (default, 02410060, 2) exited non-zero on 'SIP/2003-40ea'

==============================================================
zaptel.conf
span=1,1,0,ccs,hdb3
span=2,2,0,ccs,hdb3
#span=3,2,0,ccs,hdb3
#span=4,2,0,ccs,hdb3
#
bchan=1-15
dchan=16
bchan=17-31
bchan=32-46
dchan=47
bchan=48-62
loadzone =uk

zapata.conf

;signalling= pri_cpe
;switchtype=euroisdn
;switchtype=5ess
;pridialplan=unknown
context=default

group=1
signalling=pri_cpe
;callerid="CallerID Phone" <2003>
channel=>1-15
channel=>17-31


group = 2
signalling=pri_cpe
channel => 32-46
channel => 48-62

;group = 3
;signalling=pri_cpe
;channel => 63-77
;channel => 79-93

;group = 4
;context=incoming
;signalling=pri_cpe
;channel => 94-108
;channel => 110-124