[64580.748522] Processing WAN device wanpipe3...
[64580.748533] wanpipe3: Locating: A200/A400/B600/B700/B800 card, CPU A, PciBus=5, PciSlot=12
[64580.748550] wanpipe3: Found: A500/B700 card, CPU A, PciBus=5, PciSlot=12, Port=4
[64580.748580] wanpipe3: Starting AFT Analog Hardware Init.
[64580.748620] wanpipe3: Enabling front end link monitor
[64580.748630] wanpipe3: Global Chip Configuration: used=3 used_type=1
[64580.748639] wanpipe3: Global Front End Configuration!
[64580.748647] wanpipe3: Configuring FXS/FXO Front End ...
[64582.853861] wanpipe3: Module 1: Installed -- Auto FXS!
[64585.239418] wanpipe3: Module 2: Installed -- Auto FXS!
[64585.239430] wanpipe3: Running post initialization...
[64585.239437] wanpipe3: Remora config done!
[64585.239445] wanpipe3: AFT Data Mux Bit Map: 0x01234567
[64585.239681] wanpipe3: Front End Interface Ready 0x00000000
[64585.239697] wanpipe3: Register EC interface wanec1 (usage 3, max ec chans 16)!
[64585.239710] wanpipe3: Configuring Device   :wanpipe3  FrmVr=35
[64585.239718] wanpipe3:    Global MTU     = 1500
[64585.239725] wanpipe3:    Global MRU     = 1500
[64585.239732] wanpipe3:    Data Mux Map   = 0x01234567
[64585.239739] wanpipe3:    Rx CRC Bytes   = 0
[64585.239746] wanpipe3:    Memory: Card=58824 Wandev=1272 Card Union=9384
[64585.239754] wanpipe3:    Global TDM Int = Enabled
[64585.239761] wanpipe3:    Global TDM Ring= Enabled
[64585.239767] wanpipe3:    Global SPAN IRQ= RX/TX
[64585.239774] wanpipe3:    TDM HW TONE    = Disabled
[64585.239781] wanpipe3:    TDMV Span      = 1 : Enabled
[64585.239789] wanpipe3:    RTP TAP        = Disabled
[64585.240030] 
[64585.240039] wanpipe3: Error: TDM VOICE prot not compiled
[64585.240047] wanpipe3:        during installation process!