usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource orion_clocksource Switched to NOHz mode on CPU #0 FS-Cache: Loaded NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. FS-Cache: Netfs 'nfs' registered for caching JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. JFS: nTxBlock = 4010, nTxLock = 32080 msgmni has been set to 1002 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled brd: module loaded loop: module loaded ONFI flash detected NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 1415 at 0x00000b0e0000 Bad eraseblock 1421 at 0x00000b1a0000 Bad eraseblock 1423 at 0x00000b1e0000 Bad eraseblock 1431 at 0x00000b2e0000 Bad eraseblock 1435 at 0x00000b360000 Bad eraseblock 1437 at 0x00000b3a0000 Bad eraseblock 1439 at 0x00000b3e0000 Bad eraseblock 1451 at 0x00000b560000 Creating 3 MTD partitions on "orion_nand": 0x000000000000-0x000000100000 : "u-boot" 0x000000100000-0x000000500000 : "uImage" 0x000000500000-0x000020000000 : "root" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: max. sequence number: 5037 UBI: attached mtd2 to ubi0 UBI: MTD device name: "root" UBI: MTD device size: 507 MiB UBI: number of good PEBs: 4048 UBI: number of bad PEBs: 8 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 4048 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 3/1 UBI: image sequence number: 1154910854 UBI: background thread "ubi_bgt0d" started, PID 480 MV-643xx 10/100/1000 ethernet driver version 1.4 mv643xx_eth smi: probed net eth0: port 0 with MAC address 00:50:43:24:2b:36 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver orion-ehci orion-ehci.0: Marvell Orion EHCI orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 mousedev: PS/2 mouse device common for all mice rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) usbcore: registered new interface driver usbhid usbhid: USB HID core driver oprofile: hardware counters not available oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers Registering the dns_resolver key type registered taskstats version 1 rtc-mv rtc-mv: setting system clock to 2011-04-19 17:01:30 UTC (1303232490) usb 1-1: new high speed USB device using orion-ehci and address 2 UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: file system size: 514676736 bytes (502614 KiB, 490 MiB, 3989 LEBs) UBIFS: journal size: 25804800 bytes (25200 KiB, 24 MiB, 200 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 4952683 bytes (4836 KiB) VFS: Mounted root (ubifs filesystem) on device 0:12. Freeing init memory: 156K INIT: version 2.88 bootingscsi0 : usb-storage 1-1:1.0 Using makefile-style concurrent boot in runlevel S. .udev/ already exists on the static /dev! ... (warning). Starting the hotplug events dispatcher: udevdudevd[635]: inotify_add_watch(6, /dev/loop2, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/loop3, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/loop4, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/loop5, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/loop6, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/loop7, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram11, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram1, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram10, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram14, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram12, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram0, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram13, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/loop1, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram15, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram2, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram3, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram5, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram6, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram4, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram8, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram7, 10) failed: No such file or directory udevd[635]: inotify_add_watch(6, /dev/ram9, 10) failed: No such file or directory . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...scsi 0:0:0:0: Direct-Access BUFFALO HD-PCU2 0108 PQ: 0 ANSI: 4 sd 0:0:0:0: [sda] 976773167 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk done. Setting the system clock. Activating swap...done. Setting the system clock. Cleaning up ifupdown.... Setting up networking.... Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) /dev/sda1: recovering journal /dev/sda1: clean, 297/27467776 files, 1795904/109862502 blocks done. Mounting local filesystems...EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...done. Setting kernel variables ...done. Starting rpcbind daemon...NET: Registered protocol family 10 ADDRCONF(NETDEV_UP): eth0: link is not ready rpcbind: Cannot open '/var/run/rpcbind/rpcbind.xdr' file for reading, errno 2 (No such file or directory) rpcbind: Cannot open '/var/run/rpcbind/portmap.xdr' file for reading, errno 2 (No such file or directory) . Starting NFS common utilities: statdInstalling knfsd (copyright (C) 1996 okir@monad.swb.de). idmapd. Cleaning up temporary files.... INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Starting rpcbind daemon...Already running.. Starting NFS common utilities: statd idmapd. Starting enhanced syslogd: rsyslogd. Starting web server: apache2eth0: link up, 100 Mb/s, full duplex, flow control disabled ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready apache2: apr_sockaddr_info_get() failed for cn-w4-cctv apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName . Starting deferred execution scheduler: atd. Starting system message bus: dbus. Starting periodic command scheduler: cron. Starting mail-transfer-agent: nullmailer. Starting MySQL database server: mysqld .. Checking for corrupt, not cleanly closed and upgrade needing tables.. Starting virtual private network daemon:. sshd (1406): /proc/1406/oom_adj is deprecated, please use /proc/1406/oom_score_adj instead. Starting OpenBSD Secure Shell server: sshd. Starting ZoneMinder: success Debian GNU/Linux wheezy/sid cn-w4-cctv ttyS0