<6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 2.6.35.10-g13f6602 (htc-kernel@and18-2) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Sat Mar 12 20:21:53 CST 2011 <4>[ 0.000000] CPU: ARMv7 Processor [511f00f1] revision 1 (ARMv7), cr=10c53c7f <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache <4>[ 0.000000] Machine: saga <7>[ 0.000000] find the memsize tag <7>[ 0.000000] parse_tag_memsize: 768 <6>[ 0.000000] [saga_fixup] <7>[ 0.000000] find the engineer tag <7>[ 0.000000] parse_tag_engineerid: 0x0 <7>[ 0.000000] find the smi tag <7>[ 0.000000] parse_tag_smi: smi size = 0 <7>[ 0.000000] find the hwid tag <7>[ 0.000000] parse_tag_hwid: hwid = 0x0 <7>[ 0.000000] find the skuid tag <7>[ 0.000000] parse_tag_skuid: hwid = 0x28102 <7>[ 0.000000] tag_panel_parsing: panel type = 4194320 <7>[ 0.000000] find the engineer tag <7>[ 0.000000] parse_tag_engineerid: 0x0 <4>[ 0.000000] Ignoring unrecognised tag 0x4d534d76 <7>[ 0.000000] tag_ps_parsing: PS type = 0x0 <6>[ 0.000000] CAM_AWB_CAL Data size = 1026 , 0x59504550, size = 4096 <4>[ 0.000000] Ignoring unrecognised tag 0x41387898 <4>[ 0.000000] BT Data size= 4, 0x43294329,7c,61,93,d7,88,c6,00,00, <6>[ 0.000000] parse_tag_ps_calibration: ps_kparam1 = 0x50530306, ps_kparam2 = 0x2080a06 <7>[ 0.000000] parse_tag_gs_calibration: gs_kvalue = 0x67f8fefc <7>[ 0.000000] find the memsize tag <7>[ 0.000000] parse_tag_memsize: 768 <7>[ 0.000000] csa_kvalue1 = 0x0, csa_kvalue2 = 0x0, csa_kvalue3 = 0x0 <7>[ 0.000000] gyro_gs data <7>[ 0.000000] [0]:0x0 <7>[ 0.000000] [1]:0x0 <7>[ 0.000000] [2]:0x0 <7>[ 0.000000] [3]:0x0 <7>[ 0.000000] [4]:0x0 <7>[ 0.000000] [5]:0x0 <7>[ 0.000000] [6]:0x0 <7>[ 0.000000] [7]:0x0 <7>[ 0.000000] [8]:0x0 <7>[ 0.000000] [9]:0x0 <7>[ 0.000000] [10]:0x0 <7>[ 0.000000] [11]:0x0 <7>[ 0.000000] [12]:0x0 <7>[ 0.000000] [13]:0x0 <7>[ 0.000000] [14]:0x0 <7>[ 0.000000] [15]:0x0 <7>[ 0.000000] [16]:0x0 <7>[ 0.000000] [17]:0x0 <7>[ 0.000000] [18]:0x0 <7>[ 0.000000] [19]:0x0 <7>[ 0.000000] [20]:0x0 <7>[ 0.000000] [21]:0x0 <7>[ 0.000000] [22]:0x0 <7>[ 0.000000] [23]:0x0 <7>[ 0.000000] [24]:0x0 <7>[ 0.000000] [25]:0x0 <7>[ 0.000000] [26]:0x0 <7>[ 0.000000] [27]:0x0 <7>[ 0.000000] [28]:0x0 <7>[ 0.000000] [29]:0x0 <7>[ 0.000000] [30]:0x0 <7>[ 0.000000] [31]:0x0 <7>[ 0.000000] [32]:0x0 <7>[ 0.000000] [33]:0x0 <7>[ 0.000000] [34]:0x0 <7>[ 0.000000] [35]:0x0 <7>[ 0.000000] [36]:0x0 <6>[ 0.000000] kmemleak: Kernel memory leak detector disabled <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback <7>[ 0.000000] On node 0 totalpages: 159488 <7>[ 0.000000] free_area_init_node: node 0, pgdat c0597860, node_mem_map c06b3000 <7>[ 0.000000] Normal zone: 256 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 32512 pages, LIFO batch:7 <7>[ 0.000000] HighMem zone: 990 pages used for memmap <7>[ 0.000000] HighMem zone: 125730 pages, LIFO batch:31 <6>[ 0.000000] [saga_map_io] <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 158242 <5>[ 0.000000] Kernel command line: board_saga.disable_uart2=0 board_saga.usb_h2w_sw=0 board_saga.disable_sdcard=0 diag.enabled=0 board_saga.debug_uart=0 smisize=0 userdata_sel=0 androidboot.emmc=true androidboot.pagesize=4096 androidboot.baseband=38.03.02.11_M androidboot.cid=11111111 androidboot.batt_poweron=good_battery androidboot.carrier=ALL androidboot.mid=PG88***** androidboot.keycaps=qwerty androidboot.mode=recovery androidboot.serialno=HT13VTJ15561 androidboot.bootloader=0.98.0000 zygote_oneshot=off msm_watchdog.enable=1 kmemleak=off no_console_suspend=1 <6>[ 0.000000] diag_set_enabled: 0 <6>[ 0.000000] board_bootloader_setup: 0.98.0000 <6>[ 0.000000] board_bootloader_setup: SHIP BUILD <6>[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) <6>[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) <6>[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 0.000000] Memory: 128MB 316MB 179MB = 623MB total <5>[ 0.000000] Memory: 623752k/623752k available, 14200k reserved, 506880K highmem <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5>[ 0.000000] DMA : 0xffa00000 - 0xffe00000 ( 4 MB) <5>[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .init : 0xc0008000 - 0xc0037000 ( 188 kB) <5>[ 0.000000] .text : 0xc0037000 - 0xc0550000 (5220 kB) <5>[ 0.000000] .data : 0xc0550000 - 0xc0598160 ( 289 kB) <6>[ 0.000000] Hierarchical RCU implementation. <6>[ 0.000000] RCU-based detection of stalled CPUs is disabled. <6>[ 0.000000] Verbose stalled-CPUs detection is disabled. <6>[ 0.000000] NR_IRQS:390 <6>[ 0.000000] Calibrating delay loop... 511.18 BogoMIPS (lpj=2555904) <6>[ 0.240142] pid_max: default: 32768 minimum: 301 <4>[ 0.240386] Mount-cache hash table entries: 512 <6>[ 0.240936] Initializing cgroup subsys debug <6>[ 0.240936] Initializing cgroup subsys cpuacct <6>[ 0.240966] Initializing cgroup subsys freezer <6>[ 0.240997] CPU: Testing write buffer coherency: ok <6>[ 0.244445] NET: Registered protocol family 16 <6>[ 0.244598] NPA: Init done. <6>[ 0.244781] msm_ssbi_init() <6>[ 0.245941] pm8058_init: PMIC 8058 <4>[ 0.247131] saga_init() resaga=128 <6>[ 0.247161] cur_cpu 0x7, id 0x4a <6>[ 0.247161] socinfo_init: v4, id=74, ver=2.0, raw_id=1392, raw_ver=1392, hw_plat=0, hw_plat_ver=65536 <6>[ 0.247192] Clock ownership <6>[ 0.247192] GLBL : 07d82110 <6>[ 0.247222] APPS : 00000000 00000000 00000000 <6>[ 0.247222] ROW : 00000000 00000000 <6>[ 0.247314] YoYo--BD_ADDRESS=7c:61:93:d7:88:c6 <6>[ 6.792327] acpu_clock_init() <6>[ 6.792633] ACPU running at 768000 KHz <6>[ 6.792663] Acquire 'boot-time' perf_lock <6>[ 6.793579] ram_console: got buffer at 500000, size 100000 <6>[ 6.793792] ram_console: uncorrectable error in header <6>[ 6.793792] ram_console: found existing buffer, size 17608, start 17600 <6>[ 6.872131] console [ram0] enabled <6>[ 6.878448] saga_ssbi_pmic_init() <6>[ 6.879180] pm8058_probe: PMIC revision: e3 <6>[ 6.882446] pm8058_irq_init: j=0,start=0,irq =0,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.882690] pm8058_irq_init: j=1,start=0,irq =1,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.882812] pm8058_irq_init: j=2,start=0,irq =2,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.883056] pm8058_irq_init: j=3,start=0,irq =3,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.883270] pm8058_irq_init: j=4,start=0,irq =4,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.883422] pm8058_irq_init: j=5,start=0,irq =5,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.883636] pm8058_irq_init: j=6,start=0,irq =6,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.883880] pm8058_irq_init: j=7,start=0,irq =7,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.884033] pm8058_irq_init: j=8,start=0,irq =8,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.884246] pm8058_irq_init: j=9,start=0,irq =9,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.884399] pm8058_irq_init: j=10,start=0,irq =10,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.884643] pm8058_irq_init: j=11,start=0,irq =11,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.884918] pm8058_irq_init: j=12,start=0,irq =12,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.885070] pm8058_irq_init: j=13,start=0,irq =13,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.885284] pm8058_irq_init: j=14,start=0,irq =14,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.885528] pm8058_irq_init: j=15,start=0,irq =15,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.885681] pm8058_irq_init: j=16,start=0,irq =16,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.885894] pm8058_irq_init: j=17,start=0,irq =17,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.886169] pm8058_irq_init: j=18,start=0,irq =18,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.886291] pm8058_irq_init: j=19,start=0,irq =19,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.886535] pm8058_irq_init: j=20,start=0,irq =20,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.886779] pm8058_irq_init: j=21,start=0,irq =21,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.886901] pm8058_irq_init: j=22,start=0,irq =22,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.887145] pm8058_irq_init: j=23,start=0,irq =23,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.887390] pm8058_irq_init: j=24,start=0,irq =24,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.887542] pm8058_irq_init: j=25,start=0,irq =25,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.887756] pm8058_irq_init: j=26,start=0,irq =26,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.888000] pm8058_irq_init: j=27,start=0,irq =27,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.888153] pm8058_irq_init: j=28,start=0,irq =28,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.888397] pm8058_irq_init: j=29,start=0,irq =29,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.888610] pm8058_irq_init: j=30,start=0,irq =30,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.888763] pm8058_irq_init: j=31,start=0,irq =31,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.889007] pm8058_irq_init: j=32,start=0,irq =32,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.889221] pm8058_irq_init: j=33,start=0,irq =33,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.889373] pm8058_irq_init: j=34,start=0,irq =34,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.889617] pm8058_irq_init: j=35,start=0,irq =35,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.889862] pm8058_irq_init: j=36,start=0,irq =36,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.889984] pm8058_irq_init: j=37,start=0,irq =37,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.890228] pm8058_irq_init: j=38,start=0,irq =38,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.890350] pm8058_irq_init: j=39,start=0,irq =39,cnt = 40,PM8058_NUM_IRQS = 54' <6>[ 6.890594] pm8058_irq_init: j=0,start=40,irq =40,cnt = 12,PM8058_NUM_IRQS = 54' <6>[ 6.890838] pm8058_irq_init: j=1,start=40,irq =41,cnt = 12,PM8058_NUM_IRQS = 54' <6>[ 6.890960] pm8058_irq_init: j=2,start=40,irq =42,cnt = 12,PM8058_NUM_IRQS = 54' <6>[ 6.891204] pm8058_irq_init: j=3,start=40,irq =43,cnt = 12,PM8058_NUM_IRQS = 54' <6>[ 6.891448] pm8058_irq_init: j=4,start=40,irq =44,cnt = 12,PM8058_NUM_IRQS = 54' <6>[ 6.891571] pm8058_irq_init: j=5,start=40,irq =45,cnt = 12,PM8058_NUM_IRQS = 54' <6>[ 6.891815] pm8058_irq_init: j=6,start=40,irq =46,cnt = 12,PM8058_NUM_IRQS = 54' <6>[ 6.892059] pm8058_irq_init: j=7,start=40,irq =47,cnt = 12,PM8058_NUM_IRQS = 54' <6>[ 6.892181] pm8058_irq_init: j=8,start=40,irq =48,cnt = 12,PM8058_NUM_IRQS = 54' <6>[ 6.892425] pm8058_irq_init: j=9,start=40,irq =49,cnt = 12,PM8058_NUM_IRQS = 54' <6>[ 6.892669] pm8058_irq_init: j=10,start=40,irq =50,cnt = 12,PM8058_NUM_IRQS = 54' <6>[ 6.892822] pm8058_irq_init: j=11,start=40,irq =51,cnt = 12,PM8058_NUM_IRQS = 54' <6>[ 6.893035] pm8058_irq_init: j=0,start=52,irq =52,cnt = 2,PM8058_NUM_IRQS = 54' <6>[ 6.893280] pm8058_irq_init: j=1,start=52,irq =53,cnt = 2,PM8058_NUM_IRQS = 54' <6>[ 6.893524] pm8058_gpio_mux_cfg: ok writing config for gpio 20 (0) <6>[ 6.893798] pm8058_gpio_mux_cfg: ok writing config for gpio 22 (0) <6>[ 6.893951] pm8058_gpio_mux_cfg: ok writing config for gpio 13 (0) <6>[ 6.894226] pm8058_gpio_mux_cfg: ok writing config for gpio 14 (0) <6>[ 6.894470] pm8058_gpio_mux_cfg: ok writing config for gpio 23 (0) <6>[ 6.894653] pm8058_gpio_mux_cfg: ok writing config for gpio 24 (0) <6>[ 6.894927] pm8058_gpio_mux_cfg: ok writing config for gpio 16 (0) <6>[ 6.895111] pm8058_gpio_mux_cfg: ok writing config for gpio 17 (0) <6>[ 6.895355] pm8058_gpio_mux_cfg: ok writing config for gpio 19 (0) <6>[ 6.895507] pm8058_probe: pm8058-gpio <6>[ 6.895721] add_sub_device: add_sub_device name pm8058-gpio <6>[ 6.896118] pm8058_probe: pm8058-mpp <6>[ 6.896240] add_sub_device: add_sub_device name pm8058-mpp <6>[ 6.896667] pm8058_probe: pm8058-pwm <6>[ 6.896789] add_sub_device: add_sub_device name pm8058-pwm <6>[ 6.897186] pm8058_probe: done <6>[ 6.897338] msm_ssbi: io=ad900000 rsl='D:PMIC_SSBI' <6>[ 6.897460] saga: saga_init_mmc <6>[ 6.899566] pm8058_gpio_mux_cfg: ok writing config for gpio 18 (0) <6>[ 6.899719] pm8058_gpio_mux_cfg: ok writing config for gpio 12 (0) <6>[ 6.899993] pm8058_gpio_mux_cfg: ok writing config for gpio 17 (0) <6>[ 6.900146] pm8058_gpio_mux_cfg: ok writing config for gpio 9 (0) <6>[ 6.900421] pm8058_gpio_mux_cfg: ok writing config for gpio 35 (0) <6>[ 6.901580] pm8058_gpio_mux_cfg: ok writing config for gpio 35 (0) <7>[ 6.901916] saga_init_keypad <6>[ 6.902465] saga_wifi_init: start <3>[ 6.902893] saga_init: MFG mode = 2 <6>[ 6.904144] Scorpion registered PMU device <6>[ 6.905456] pm8058_mpp_probe: register_gpio_chip(): rc=0 <4>[ 6.922363] bio: create slab at 0 <5>[ 6.923645] pmic8058_pwm_probe: chip->dev OK <5>[ 6.923767] pmic8058_pwm_probe: OK <6>[ 6.924499] msm_i2c_probe <6>[ 6.924774] msm_i2c_probe: clk_ctl 315, 400000 Hz <6>[ 6.927154] msm_i2c_probe <6>[ 6.927368] msm_i2c_probe: clk_ctl 35d, 100000 Hz <6>[ 6.930206] Advanced Linux Sound Architecture Driver Version 1.0.23. <6>[ 6.931060] Bluetooth: Core ver 2.15 <6>[ 6.931457] NET: Registered protocol family 31 <6>[ 6.931610] Bluetooth: HCI device and connection manager initialized <6>[ 6.931854] Bluetooth: HCI socket layer initialized <6>[ 6.932342] Switching to clocksource gp_timer <6>[ 6.934539] [TPS65200]: Driver registration done <6>[ 6.935119] NET: Registered protocol family 2 <6>[ 6.935394] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 6.935943] TCP established hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 6.936523] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) <6>[ 6.936767] TCP: Hash tables configured (established 16384 bind 16384) <6>[ 6.937011] TCP reno registered <6>[ 6.937133] UDP hash table entries: 256 (order: 0, 4096 bytes) <6>[ 6.937377] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) <6>[ 6.937652] NET: Registered protocol family 1 <6>[ 6.938018] Unpacking initramfs... <6>[ 7.088439] Freeing initrd memory: 2236K <6>[ 7.089050] PMU: registered new PMU device of type 0 <6>[ 7.090057] [SMD]smd_init() <6>[ 7.090179] [SMD]smd_core_init() <6>[ 7.090301] [SMD]phy addr of smd_info.state=0x418CF0 <6>[ 7.090484] [SMD]smd_core_init() done <3>[ 7.090728] msm_init_last_radio_log: last radio log is 20648 bytes long <6>[ 7.090972] [SMD]smd_alloc_channel() cid=00 size=08192 'SMD_DS' <6>[ 7.091949] [SMD]smd_alloc_channel() cid=01 size=08192 'SMD_DIAG' <6>[ 7.092559] [SMD]smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL' <6>[ 7.094268] [SMD]SMD: ch 2 0 -> 1 <6>[ 7.094421] [SMD]smd_alloc_channel() cid=07 size=08192 'SMD_DATA1' <6>[ 7.094665] [SMD]SMD: ch 2 1 -> 2 <6>[ 7.095397] [SMD]smd_alloc_channel() cid=08 size=08192 'SMD_DATA2' <6>[ 7.096374] [SMD]smd_alloc_channel() cid=09 size=08192 'SMD_DATA3' <6>[ 7.097198] [SMD]smd_alloc_channel() cid=10 size=08192 'SMD_DATA4' <6>[ 7.098052] [SMD]smd_alloc_channel() cid=11 size=32768 'SMD_DATA5' <6>[ 7.098907] [SMD]smd_alloc_channel() cid=12 size=08192 'SMD_DATA6' <6>[ 7.099884] [SMD]smd_alloc_channel() cid=13 size=08192 'SMD_DATA7' <6>[ 7.100524] [AUD][afe.c:afe_init] AFE driver init <6>[ 7.101074] [SMD]smd_alloc_channel() cid=14 size=08192 'SMD_DATA8' <6>[ 7.101989] [SMD]smd_alloc_channel() cid=15 size=08192 'SMD_DATA9' <6>[ 7.103363] [SMD]smd_alloc_channel() cid=17 size=08192 'SMD_DATA11' <6>[ 7.104064] [AUD] snddev_icodec: snddev_icodec_probe: support_aic3254 = 1 <6>[ 7.104888] [SMD]smd_alloc_channel() cid=18 size=08192 'SMD_DATA12' <6>[ 7.105773] [AUD][lpa.c:lpa_probe] lpa probe <6>[ 7.106140] [SMD]smd_alloc_channel() cid=19 size=08192 'SMD_DATA13' <6>[ 7.107177] [SMD]smd_alloc_channel() cid=20 size=08192 'SMD_DATA14' <6>[ 7.107788] [AUD][snddev_ecodec.c:snddev_ecodec_init] snddev_ecodec_init <6>[ 7.108337] [SMD]smd_alloc_channel() cid=27 size=08192 'SMD_GPSNMEA' <6>[ 7.109252] [SMD]smd_alloc_channel() cid=38 size=08192 'SMD_DAL00' <6>[ 7.110076] [AUD][audpp.c:audpp_probe] Number of decoder supported 5 <6>[ 7.110229] [AUD][audpp.c:audpp_probe] Number of concurrency supported 7 <6>[ 7.110473] [AUD][audpp.c:audpp_probe] module_name:AUDPLAY4TASK <6>[ 7.110687] [AUD][audpp.c:audpp_probe] queueid:17 <6>[ 7.110839] [AUD][audpp.c:audpp_probe] decid:4 <6>[ 7.110961] [AUD][audpp.c:audpp_probe] nr_codec_support:1 <6>[ 7.111175] [AUD][audpp.c:audpp_probe] module_name:AUDPLAY3TASK <6>[ 7.111328] [AUD][audpp.c:audpp_probe] queueid:16 <6>[ 7.111541] [AUD][audpp.c:audpp_probe] decid:3 <6>[ 7.111663] [AUD][audpp.c:audpp_probe] nr_codec_support:11 <6>[ 7.111907] [AUD][audpp.c:audpp_probe] module_name:AUDPLAY2TASK <6>[ 7.112030] [AUD][audpp.c:audpp_probe] queueid:15 <6>[ 7.112274] [AUD][audpp.c:audpp_probe] decid:2 <6>[ 7.112396] [AUD][audpp.c:audpp_probe] nr_codec_support:11 <6>[ 7.112518] [AUD][audpp.c:audpp_probe] module_name:AUDPLAY1TASK <6>[ 7.112731] [AUD][audpp.c:audpp_probe] queueid:14 <6>[ 7.112945] [AUD][audpp.c:audpp_probe] decid:1 <6>[ 7.113159] [AUD][audpp.c:audpp_probe] nr_codec_support:11 <6>[ 7.113311] [AUD][audpp.c:audpp_probe] module_name:AUDPLAY0TASK <6>[ 7.113525] [AUD][audpp.c:audpp_probe] queueid:13 <6>[ 7.113647] [AUD][audpp.c:audpp_probe] decid:0 <6>[ 7.113891] [AUD][audpp.c:audpp_probe] nr_codec_support:11 <6>[ 7.114288] [SMD]smd_alloc_channel() cid=39 size=01024 'SMD_DATA5_CNTL' <6>[ 7.115356] [SMD]smd_alloc_channel() cid=40 size=01024 'SMD_DATA6_CNTL' <6>[ 7.116241] [SMD]smd_alloc_channel() cid=41 size=01024 'SMD_DATA7_CNTL' <6>[ 7.117187] [SMD]smd_alloc_channel() cid=42 size=01024 'SMD_DATA8_CNTL' <6>[ 7.118072] [SMD]smd_alloc_channel() cid=43 size=01024 'SMD_DATA9_CNTL' <6>[ 7.119079] [SMD]smd_alloc_channel() cid=44 size=01024 'SMD_DATA12_CNTL' <6>[ 7.120178] [SMD]smd_alloc_channel() cid=45 size=01024 'SMD_DATA13_CNTL' <6>[ 7.121124] [SMD]smd_alloc_channel() cid=46 size=01024 'SMD_DATA14_CNTL' <6>[ 7.122344] [SMD]smd_alloc_channel() cid=47 size=08192 'SMD_DATA40' <6>[ 7.123779] [SMD]smd_alloc_channel() cid=48 size=01024 'SMD_DATA40_CNTL' <6>[ 7.139221] [SMD]SMD: ch 38 0 -> 1 <3>[ 7.139373] dalrpc_sendwait: smd channel SMD_DAL00 not ready, wait 100ms. <6>[ 7.139617] [SMD]SMD: ch 38 1 -> 2 <6>[ 7.246063] [AUD][adsp.c:adsp_rtos_mtoa_cb] INIT_INFO Event <6>[ 7.246520] [AUD][adsp.c:adsp_init] msm_adsp -- 0 <6>[ 7.247619] [AUD] audio_mvs: audio_mvs_init: <6>[ 7.248107] Acquire 'boot-time' no_halt_lock 60s <6>[ 7.248535] [AUD] audio_mvs: audio_mvs_thread: <6>[ 7.249084] [HS_MGR] (headset_notifier_register) Register MIC_BIAS notifier <7>[ 7.251037] sonywvga_init_panel <6>[ 7.251556] mdp_hw_version: mdp_hw_revision=1 <4>[ 7.251800] [DISP]mdp4_hw_init <6>[ 7.255798] [DISP]mdp_probe: initialized <7>[ 7.257293] Registered led device: lcd-backlight <6>[ 7.257415] display_sysfs_init : kobject_create_and_add <6>[ 7.257659] display_sysfs_init : sysfs_create_file <7>[ 7.258117] saga_wifi_bt_sleep_clk_ctl ON=1, ID=1 <7>[ 7.258331] EN SLEEP CLK <6>[ 7.258483] pm8058_gpio_mux_cfg: ok writing config for gpio 37 (0) <7>[ 7.296325] saga_wifi_bt_sleep_clk_ctl ON=0, ID=1 <7>[ 7.296447] DIS SLEEP CLK <6>[ 7.296600] pm8058_gpio_mux_cfg: ok writing config for gpio 37 (0) <3>[ 7.299468] err: null fmtx pdata <4>[ 7.299621] htc_fmtx_rfkill: probe of htc_fmtx_rfkill failed with error -22 <7>[ 7.300445] Registered led device: flashlight <6>[ 7.300567] [FLT]flashlight_probe: led_count = 0 <6>[ 7.300720] [FLT]flashlight_probe: The Flashlight Driver is ready <6>[ 7.301574] [BATT] init over voltage interrupt detection. at 758790257 (1970-01-01 00:00:00.758637818 UTC) <6>[ 7.366271] [BATT] M2A_RPC: set_charging: 0 at 823424402 (1970-01-01 00:00:00.823271963 UTC) <6>[ 7.366668] Switch charger OFF <6>[ 7.367645] [BATT] M2A_RPC: cable_update: none at 824765866 (1970-01-01 00:00:00.824643914 UTC) <6>[ 7.368011] [BATT] htc_cable_status_update: 0 -> 0 <6>[ 7.368560] [BATT] A2M_RPC: get_batt_info: batt_id=2, batt_vol=4079, batt_temp=307, batt_current=0, level=100, charging_source=0, charging_enabled=0, full_bat=1450000, over_vchg=0 at 825924402 (1970-01-01 00:00:00.825528061 UTC) <6>[ 7.369934] rmt_storage_get_ramfs: RAMFS Info (from SMEM): Baseaddr = 0x00700000, Size = 0x00300000 <6>[ 7.370361] rmt_storage_probe: Remote storage RPC client initialized <7>[ 7.370513] rpc_write:prog = a7000030 , procedure = 3, type = 0, xid = 4 <7>[ 7.371368] rpc_write:prog = a7000030 , procedure = 5, type = 0, xid = 5 <7>[ 7.371917] rpc_write:prog = a7000030 , procedure = 5, type = 0, xid = 6 <7>[ 7.372558] rpc_write:prog = a7000030 , procedure = 5, type = 0, xid = 7 <7>[ 7.373199] rpc_write:prog = a7000030 , procedure = 4, type = 0, xid = 8 <7>[ 7.373718] rpc_write:prog = a7000030 , procedure = 9, type = 0, xid = 9 <7>[ 7.374511] rpc_write:prog = a7000030 , procedure = 5, type = 0, xid = 10 <6>[ 7.376037] [HS_MGR] (htc_headset_mgr_probe) ++++++++++++++++++++ <6>[ 7.377105] input: h2w headset as /devices/virtual/input/input0 <6>[ 7.378265] [HS_MGR] (htc_headset_mgr_probe) Create RPC server successfully <6>[ 7.378540] [HS_MGR] (hs_notify_driver_ready) HS_MGR ready <6>[ 7.379150] [HS_MGR] (htc_headset_mgr_probe) -------------------- <6>[ 7.379699] [HS_PMIC] (htc_headset_pmic_probe) ++++++++++++++++++++ <6>[ 7.380126] [HS_PMIC] (htc_headset_pmic_probe) Register ADC RPC client successfully <6>[ 7.380279] [HS_MGR] (headset_notifier_register) Register HPIN_GPIO notifier <6>[ 7.380493] [HS_MGR] (headset_notifier_register) Register REMOTE_ADC notifier <6>[ 7.380737] [HS_MGR] (headset_notifier_register) Register RPC_KEY notifier <6>[ 7.380859] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier <6>[ 7.381103] [HS_MGR] (hs_notify_driver_ready) HS_PMIC ready <6>[ 7.381225] [HS_PMIC] (htc_headset_pmic_probe) -------------------- <4>[ 7.391754] highmem bounce pool size: 64 pages <6>[ 7.392242] ashmem: initialized <6>[ 7.393737] fuse init (API version 7.14) <6>[ 7.397460] alg: No test for stdrng (krng) <6>[ 7.397644] io scheduler noop registered <6>[ 7.397888] io scheduler deadline registered (default) <6>[ 7.398101] io scheduler cfq registered <6>[ 7.405456] [DISP]mdp4_overlay_pipe_alloc: pipe=c0581880 ndx=1 <6>[ 7.416748] [DISP]setup_fb_info msmfb->xres 480, msmfb->yres 800 <6>[ 7.416992] [DISP]msmfb_probe() installing 480 x 800 panel <6>[ 7.417602] [DISP]mdp_lcdc_probe: initialized <6>[ 7.418884] [VID] msm_vidc_dec: Inside vid_dec_init() <6>[ 7.419586] [VID] msm_vidc_dec: Inside vid_dec_vcd_init() <6>[ 7.419860] [VID] msm_vidc_enc: Inside vid_enc_init() <6>[ 7.420654] [VID] msm_vidc_enc: Inside vid_enc_vcd_init() <3>[ 7.420928] <3>[ 7.420928] [VID] err: Device config mismatch <6>[ 7.421997] diagchar_init:swapper(parent:swapper): tgid=1 <6>[ 7.422241] diagchar initializing .. <6>[ 7.422698] [SMD]SMD: ch 1 0 -> 1 <6>[ 7.422912] diag opened SMD port pdev->id=0; r = 0 ch=c7c62600 <6>[ 7.423126] [SMD]SMD: ch 1 1 -> 2 <6>[ 7.424072] diagchar initialized <6>[ 7.424316] msm_serial: detected port #1 <6>[ 7.424499] msm_serial.1: ttyMSM1 at MMIO 0xacb00000 (irq = 69) is a MSM <6>[ 7.425292] msm_serial: driver initialized <6>[ 7.425842] msm_serial_hs module loaded <6>[ 7.426330] [BT]msm_serial_hs module loaded <6>[ 7.426696] [BT]BCM chip <6>[ 7.426910] msm_serial_hs_bcm.0: ttyHS0 at MMIO 0xa3300000 (irq = 73) is a MSM HS UART <6>[ 7.427764] [BT]msm_serial_hs module loaded <6>[ 7.428283] [BT]msm_serial_hs module loaded <6>[ 7.433441] loop: module loaded <6>[ 7.433807] pmem: Initializing pmem (user-space) as cached <6>[ 7.434875] pmem: Initializing pmem_adsp (user-space) as non-cached <6>[ 7.436096] pmem: Initializing pmem_kernel_ebi1 (in-kernel) <6>[ 7.436889] marimba_init <6>[ 7.437072] marimba_probe <6>[ 7.439147] get_codec_type, marimba_read = 2 <6>[ 7.439819] get_codec_type, codec is TIMPANI <6>[ 7.439941] marimba_probe, get_codec_type()= 0, driver_data = marimba, 0 <6>[ 7.440734] get_codec_type, marimba_read = 2 <6>[ 7.441406] get_codec_type, codec is TIMPANI <6>[ 7.445953] [AUD] marimba_codec: marimba_codec_init <6>[ 7.446289] [AUD] marimba_codec: marimba_codec_probe <6>[ 7.447570] msm_spi_clock_set: 26000000 <4>[ 7.448364] msm_spi_probe <6>[ 7.449188] [AUD] spi_aic3254: spi_aic3254_init <6>[ 7.449462] [AUD] spi_aic3254: spi_aic3254_probe <6>[ 7.453277] PPP generic driver version 2.4.2 <6>[ 7.453918] PPP Deflate Compression module registered <6>[ 7.454162] PPP BSD Compression module registered <6>[ 7.456787] PPP MPPE Compression module registered <6>[ 7.457031] NET: Registered protocol family 24 <6>[ 7.460479] [USB] msm72k_probe <6>[ 7.460632] [USB] accessory detect 1 <6>[ 7.460876] [USB] id_pin_gpio 145 <6>[ 7.460998] [USB] dock detect 0 <6>[ 7.461120] [USB] dock pin gpio 0 <6>[ 7.461364] [USB] msm72k_probe() io=c889c000, irq=60, dma=ffa0d000(c33b000) <3>[ 7.461517] msm_hsusb_rpc_connect: rpc connect success vers = 10003 <6>[ 7.462646] android init <6>[ 7.462890] android_probe pdata: c0564f00 <6>[ 7.463592] android_bind <7>[ 7.463745] android_bind_config <6>[ 7.464172] android_usb gadget: android_usb ready <6>[ 7.464294] [USB] msm72k_udc: registered gadget driver 'android_usb' <6>[ 7.464660] [USB] hsusb: IDLE -> ONLINE <6>[ 7.464782] [USB] lpm exit <6>[ 7.465179] [USB] hsusb: reset controller <6>[ 7.465545] f_adb init <6>[ 7.465667] android_register_function adb <6>[ 7.465789] f_mass_storage init <6>[ 7.465911] android_register_function usb_mass_storage <6>[ 7.466156] f_rndis init <6>[ 7.466278] android_register_function ether <6>[ 7.466491] serial init <6>[ 7.466644] android_register_function serial <6>[ 7.466766] f_projector init <6>[ 7.467651] android_register_function projector <6>[ 7.467864] f_ecm init <6>[ 7.468017] android_register_function cdc_ethernet <6>[ 7.468139] android_register_function diag <4>[ 7.468414] android_usb gadget: using random self ethernet address <4>[ 7.468536] android_usb gadget: using random host ethernet address <6>[ 7.469360] usb0: MAC e2:43:45:c2:10:e3 <6>[ 7.469482] usb0: HOST MAC fe:d4:7b:49:be:a9 <6>[ 7.469970] mass_storage_bind_config <6>[ 7.470428] fsg_probe pdata: c0566b40 <6>[ 7.471160] android_usb gadget: Number of LUNs=1 <6>[ 7.471405] adb_bind_config <6>[ 7.473449] serial_bind_config <6>[ 7.474792] projector_bind_config <6>[ 7.474945] projector_touch_init: x=480 y=800 <6>[ 7.475524] input: projector_input as /devices/virtual/input/input1 <6>[ 7.475646] projector_touch_init OK <6>[ 7.476196] input: projector-Keypad as /devices/virtual/input/input2 <6>[ 7.476318] projector_keypad_init OK <6>[ 7.477020] usb: product_id=0xff9 <6>[ 7.477935] atmel_ts_init(): <6>[ 7.478210] saga_ts_atmel_power: power 1 <6>[ 7.493560] saga_ts_atmel_power: power 2 <6>[ 7.508026] msm_hsusb_phy_reset <6>[ 7.563232] Touch: 0x01 0x90 0x77 0xA1 0x0A 0x00 0x00 <6>[ 7.563751] Touch: 0x01 0x90 0x77 0xA1 0x0A 0x00 0x00 <6>[ 7.583648] Touch: 0x01 0x00 0x77 0xA1 0x0A 0x00 0x00 <6>[ 7.603271] Touch: No more message <6>[ 7.623321] info block: 0x80 0x10 0x20 0xAA 0x12 0x0C 0x11 <6>[ 7.643341] Type: 25, Start: 0070, Size: 82, Instance: 0, RD#: 0, 0 <6>[ 7.644073] Type: 2C, Start: 00F2, Size: 1, Instance: 0, RD#: 0, 0 <6>[ 7.644744] Type: 05, Start: 00F3, Size: 9, Instance: 0, RD#: 0, 0 <6>[ 7.645507] Type: 06, Start: 00FC, Size: 6, Instance: 0, RD#: 1, 1 <6>[ 7.653289] [USB] ulpi: write 0x06 to 0x36 <6>[ 7.653533] [USB] ulpi: write 0x0c to 0x31 <6>[ 7.653656] [USB] ulpi: write 0x31 to 0x32 <6>[ 7.653900] [USB] ulpi: write 0x01 to 0x0d <6>[ 7.654022] [USB] ulpi: write 0x01 to 0x10 <6>[ 7.654144] [USB] handle_notify_offline: notify offline <6>[ 7.654418] [USB] msm_hsusb: enable pullup <6>[ 7.654541] [USB] accessory_detect_init: id pin 145 <6>[ 7.654998] [USB] hsusb: ONLINE -> OFFLINE <6>[ 7.655242] [USB] handle_notify_offline: notify offline <6>[ 7.660064] msm_hsusb_phy_reset <6>[ 7.660308] [USB] lpm enter <6>[ 7.660430] [USB] usb_suspend_phy <6>[ 7.663360] Type: 26, Start: 0102, Size: 8, Instance: 0, RD#: 0, 0 <6>[ 7.683380] Type: 07, Start: 010A, Size: 3, Instance: 0, RD#: 0, 0 <6>[ 7.703369] Type: 08, Start: 010D, Size: A, Instance: 0, RD#: 0, 0 <6>[ 7.723419] Type: 09, Start: 0117, Size: 20, Instance: 0, RD#: 8, 2 <6>[ 7.743438] Type: 0F, Start: 0137, Size: B, Instance: 0, RD#: 1, A <6>[ 7.744201] Type: 12, Start: 0142, Size: 2, Instance: 0, RD#: 0, 0 <6>[ 7.744964] Type: 13, Start: 0144, Size: 10, Instance: 0, RD#: 1, B <6>[ 7.745605] Type: 14, Start: 0154, Size: C, Instance: 0, RD#: 1, C <6>[ 7.746337] Type: 16, Start: 0160, Size: 11, Instance: 0, RD#: 1, D <6>[ 7.746948] Type: 17, Start: 0171, Size: F, Instance: 0, RD#: 1, E <6>[ 7.747650] Type: 18, Start: 0180, Size: 13, Instance: 0, RD#: 4, F <6>[ 7.748260] Type: 19, Start: 0193, Size: E, Instance: 0, RD#: 1, 13 <6>[ 7.748992] Type: 1C, Start: 01A1, Size: 6, Instance: 0, RD#: 1, 14 <6>[ 7.749206] finger_type: 2, max finger: 4 <6>[ 7.803894] CRC passed: 0x77 0xA1 0x0A <6>[ 7.805358] input: atmel-touchscreen as /devices/virtual/input/input3 <6>[ 7.805999] atmel_qt602240 0-004a: Start touchscreen atmel-touchscreen in interrupt mode <6>[ 7.806884] Touch Status: 0x01 0x00 0x77 0xA1 0x0A <6>[ 7.807922] [KEY] GPIO Input Driver: Start gpio inputs for saga-keypad in interrupt mode <6>[ 7.808593] input: saga-keypad as /devices/virtual/input/input4 <6>[ 7.809936] using input dev h2w headset for key reset <6>[ 7.810211] using input dev saga-keypad for key reset <6>[ 7.812164] using rtc device, msm_rtc, for alarms <6>[ 7.812408] rs30000048:00040000 rs30000048:00040000: rtc core: registered msm_rtc as rtc0 <6>[ 7.813201] [COMP][AKM8975] AKM8975 compass driver: init <6>[ 7.813476] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 0 <6>[ 7.813629] [KEY] gpio_keys_scan_keys: key 1-115, 1 (195) changed to 0 <6>[ 7.813903] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 0 <6>[ 7.814086] [COMP][AKM8975] akm8975_probe: <6>[ 7.815032] input: compass as /devices/virtual/input/input5 <6>[ 7.816528] BMA150 G-sensor driver: init <6>[ 7.816802] BMA150 G-sensor I2C driver: gs_kvalue = 0x67F8FEFC <6>[ 7.818176] [AUD] tpa2051d3: tpa2051d3_init <6>[ 7.818603] [FLT]adp1650 Led Flash driver: init <6>[ 7.818908] [PS][CM3628] cm3628_probe <6>[ 7.819061] [PS][CM3628] cm3628_probe: is_cmd 0xd0, ps_adc_offset=0x3, ps_debounce=0x0 <6>[ 7.819641] input: lightsensor-level as /devices/virtual/input/input6 <6>[ 7.820770] input: proximity as /devices/virtual/input/input7 <6>[ 7.821441] [LS][CM3628] lightsensor_set_kvalue: ALS calibrated als_kadc=0x6da5049f <6>[ 7.821685] [LS][CM3628] lightsensor_set_kvalue: als_kadc=0x49f, als_gadc=0x730 <6>[ 7.821807] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[0], 0 <6>[ 7.822052] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[1], 1 <6>[ 7.822296] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[2], 3 <6>[ 7.822418] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[3], 2e <6>[ 7.822662] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[4], 5a <6>[ 7.822906] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[5], 3a4 <6>[ 7.823120] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[6], 65c <6>[ 7.823272] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[7], a05 <6>[ 7.823669] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[8], dae <6>[ 7.823883] [LS][CM3628] lightsensor_update_table: Calibrated adc_table: data[9], ffff <6>[ 7.824127] [PS][CM3628] psensor_set_kvalue: PS calibrated ps_kparam1 = 0x50530306, ps_kparam2 = 0x2080a06 <6>[ 7.824371] [PS][CM3628] psensor_set_kvalue: PS calibrated inte_cancel_set = 0x6 <7>[ 7.824951] __capella_cm3628_power: Turn the capella_cm3628 power on <6>[ 7.843505] [PS][CM3628] initial_cm3628, INTERRUPT GPIO val = 1 <6>[ 7.864929] [PS][CM3628] psensor_initial_cmd, finish <6>[ 7.865936] [PS][CM3628] cm3628_probe: Probe success! <4>[ 7.866790] [CAM]s5k4e1gx_init <4>[ 7.867034] [CAM]__s5k4e1gx_probe <6>[ 7.867156] [CAM]s5k4e1gx_vreg_enable camera vreg on <6>[ 7.869720] [CAM]sctrl.node 0 <4>[ 7.869842] [CAM]s5k4e1gx_sensor_probe() <6>[ 7.870025] [CAM]s5k4e1gx_probe called! <6>[ 7.920288] [CAM]s5k4e1gx_probe successed! rc = 0 <6>[ 7.920623] [CAM]s5k4e1gx s->node 0 <6>[ 7.920745] [CAM]s5k4e1gx: s5k4e1gx_sensor_probe: switch clk <6>[ 7.920989] doing clk switch (saga)(s5k4e1gx) <6>[ 7.966217] [CAM]s5k4e1gx_sensor_init(): reseting sensor. <4>[ 7.966979] [CAM]sensor evt version : 0x1f <4>[ 7.967102] [CAM]use analog_settings_saga <6>[ 7.973846] s5k4e1gx_sysfs_init : kobject_create_and_add <6>[ 7.973999] s5k4e1gx_sysfs_init : sysfs_create_file <6>[ 7.975921] [CAM]s5k3h1gx_init <6>[ 7.976501] [CAM]mt9v113_init <6>[ 7.976715] [CAM]__mt9v113_probe <6>[ 7.977264] [CAM]sctrl.node 1 <6>[ 7.977416] [CAM]mt9v113_probe succeeded! <6>[ 7.977874] [CAM]mt9v113 s->node 1 <6>[ 7.977996] [CAM]mt9v113: mt9v113_sensor_probe switch clk <6>[ 7.978240] doing clk switch (saga)(mt9v113) <6>[ 7.978363] [CAM]mt9v113_reset: ++++ <6>[ 8.013641] [CAM]mt9v113: MCLK enable clk <6>[ 8.073913] [CAM]mt9v113_sensor_init: mt9v113: model_id = 0x2280 <6>[ 8.074066] [CAM]mt9v113_reg_init: Power Up Start <6>[ 8.096893] [CAM]mt9v113_reg_init: RESET and MISC Control <6>[ 8.175018] mt9v113_i2c_write_bit check_bit:0x 8 <6>[ 8.175323] mt9v113_i2c_write_bit: mt9v113: 0x3210 reg value = 0x 9b0 <6>[ 8.175689] mt9v113_i2c_write_bit: mt9v113: Set to 0x3210 reg value = 0x 9b8 <6>[ 8.485260] [CAM]suspend: mt9v113: Set to 0x0018 reg value = 0x2b <6>[ 8.504333] [CAM]suspend: ( check 0x0018[14] is 1 ) k=1 <6>[ 8.544189] [CAM]mt9v113:kobject creat and add <6>[ 8.544342] [CAM]mt9v113:sysfs_create_file <6>[ 8.544464] [CAM]drivers/media/video/msm/mt9v113.c mt9v113_sensor_probe:1996 <6>[ 8.546752] msm_gemini_init gemini: success <6>[ 8.547119] Driver for 1-wire Dallas network protocol. <6>[ 8.548034] device-mapper: uevent: version 1.0.3 <6>[ 8.548645] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com <3>[ 8.549591] mmc0: No card detect facilities available <6>[ 8.550109] mmc0: Qualcomm MSM SDCC at 0x00000000a0500000 irq 98,0 dma 7 <6>[ 8.550354] mmc0: Platform slot type: MMC <6>[ 8.550476] mmc0: 4 bit data mode disabled <6>[ 8.550720] mmc0: 8 bit data mode enabled <6>[ 8.550842] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz <6>[ 8.551086] mmc0: Slot eject status = 0 <6>[ 8.551208] mmc0: Power save feature enable = 1 <6>[ 8.551330] mmc0: DM non-cached buffer at ffa0f000, dma_addr 0x0bb02000 <6>[ 8.551574] mmc0: DM cmd busaddr 0x0bb02000, cmdptr busaddr 0x0bb02300 <6>[ 8.552520] mmc1: Qualcomm MSM SDCC at 0x00000000a3000000 irq 96,0 dma 8 <6>[ 8.552642] mmc1: Platform slot type: N/A <6>[ 8.552886] mmc1: 4 bit data mode enabled <6>[ 8.553009] mmc1: 8 bit data mode disabled <6>[ 8.553131] mmc1: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz <6>[ 8.553375] mmc1: Slot eject status = 1 <6>[ 8.553497] mmc1: Power save feature enable = 1 <6>[ 8.553741] mmc1: DM non-cached buffer at ffa10000, dma_addr 0x0ba04000 <6>[ 8.553863] mmc1: DM cmd busaddr 0x0ba04000, cmdptr busaddr 0x0ba04300 <6>[ 8.554840] saga_sdslot_switchvdd: Disabling SD slot power <6>[ 8.555267] mmc2: Qualcomm MSM SDCC at 0x00000000a3100000 irq 100,332 dma 8 <6>[ 8.555511] mmc2: Platform slot type: SD <6>[ 8.555633] mmc2: 4 bit data mode enabled <6>[ 8.555755] mmc2: 8 bit data mode disabled <6>[ 8.555999] mmc2: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz <6>[ 8.556121] mmc2: Slot eject status = 0 <6>[ 8.556365] mmc2: Power save feature enable = 1 <6>[ 8.556488] mmc2: DM non-cached buffer at ffa11000, dma_addr 0x0c3ee000 <6>[ 8.556701] mmc2: DM cmd busaddr 0x0c3ee000, cmdptr busaddr 0x0c3ee300 <7>[ 8.558197] Registered led device: green <7>[ 8.558624] Registered led device: amber <7>[ 8.558959] Registered led device: button-backlight <6>[ 8.560699] logger: created 64K log 'log_main' <6>[ 8.561218] logger: created 256K log 'log_events' <6>[ 8.561645] logger: created 64K log 'log_radio' <6>[ 8.562164] logger: created 64K log 'log_system' <4>[ 8.563415] No device for DAI CODEC_DAI <4>[ 8.563537] No device for DAI CPU_DAI <3>[ 8.564392] msm_soc: create pcms <6>[ 8.564758] asoc: CODEC_DAI <-> CPU_DAI mapping ok <4>[ 8.566406] No device for DAI MVS_CODEC_DAI <4>[ 8.566650] No device for DAI MVS_CPU_DAI <6>[ 8.567352] asoc: MVS_CODEC_DAI <-> MVS_CPU_DAI mapping ok <6>[ 8.568786] ALSA device list: <6>[ 8.568939] #0: msm-audio (MSM-CARD) <6>[ 8.569061] #1: msm-mvs-audio (MSM-MVS-CARD) <6>[ 8.569366] GACT probability NOT on <6>[ 8.569488] Mirror/redirect action on <6>[ 8.569610] u32 classifier <6>[ 8.569732] Actions configured <6>[ 8.569976] Netfilter messages via NETLINK v0.30. <6>[ 8.570159] nf_conntrack version 0.5.0 (9781 buckets, 39124 max) <4>[ 8.570648] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use <4>[ 8.570800] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or <4>[ 8.571044] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. <6>[ 8.571380] ctnetlink v0.93: registering with nfnetlink. <6>[ 8.571716] xt_time: kernel timezone is -0000 <6>[ 8.572082] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 8.572448] arp_tables: (C) 2002 David S. Miller <6>[ 8.572662] TCP cubic registered <6>[ 8.573120] NET: Registered protocol family 10 <6>[ 8.573730] lo: Disabled Privacy Extensions <6>[ 8.574920] Mobile IPv6 <6>[ 8.575134] IPv6 over IPv4 tunneling driver <6>[ 8.575958] sit0: Disabled Privacy Extensions <6>[ 8.576782] ip6tnl0: Disabled Privacy Extensions <6>[ 8.577117] NET: Registered protocol family 17 <6>[ 8.577270] NET: Registered protocol family 15 <6>[ 8.577392] ThumbEE CPU extension supported. <6>[ 8.578094] clock_late_init() disabled 21 unused clocks <6>[ 8.578796] [Port list] init() <6>[ 8.579040] [Port list] Virtual Address for port_list: [f8155d10] <6>[ 8.579162] [Port list] Physical Address for port_list: [455D10] <6>[ 8.580291] [AUD][voice.c:voice_init] voice_init <6>[ 8.580413] [AUD] voice: dev_state -> DEV_INIT <6>[ 8.580535] [AUD] voice: voc_state -> VOICE_INIT <6>[ 8.581207] [AUD] voice: [voice] send CMD_ACQUIRE_INIT <6>[ 8.582214] perflock_notifier_call: cpufreq lock speed 1024000 <6>[ 8.582458] active perf lock 'boot-time' <6>[ 8.583251] [AUD][voice.c:voice_thread] voice_thread() start <6>[ 8.583526] VFP support v0.3: implementor 51 architecture 64 part 0f variant 1 rev 0 <6>[ 8.600219] kgsl mmu config 0x1555551 <6>[ 8.617553] rs30000048:00040000 rs30000048:00040000: setting system clock to 2011-04-22 21:03:08 UTC (1303506188) <4>[ 8.617828] Warning: unable to open an initial console. <6>[ 8.617980] Freeing init memory: 188K <6>[ 8.705017] mmc0: new high speed MMC card at address 0001 <6>[ 8.706420] mmcblk0: mmc0:0001 M4G2DE 2.10 GiB <6>[ 8.707305] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 > <4>[ 8.732971] mmcblk0: partition table partially beyond EOD, truncated <4>[ 8.735565] mmcblk0: p28 size 42495 extends beyond EOD, truncated <6>[ 8.804412] saga_sdslot_switchvdd: Setting level to 2900 <3>[ 8.818969] init: Unable to open persistent property directory /data/property errno: 2 <3>[ 8.821319] OC: start <3>[ 8.821502] OC: do nop <6>[ 8.822357] DK: start <6>[ 8.823455] enabling adb <6>[ 8.825836] adb_open <6>[ 8.879699] saga_sdslot_switchvdd: Setting level to 2850 <6>[ 8.892028] [DISP]msmfb: pan_update in state(1) <6>[ 8.892028] [DISP]msmfb: full update starting <3>[ 8.896881] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem <6>[ 8.897888] EXT3-fs (mmcblk0p27): error: can't find ext3 filesystem on dev mmcblk0p27. <6>[ 8.941925] [DISP]msmfb: pan_update in state(3) <6>[ 8.955657] [DISP]msmfb: full update completed <6>[ 8.955688] [DISP]msmfb: turning on panel <6>[ 8.955688] [DISP]lcdc_unblank: () <4>[ 8.995117] mmc2: high speed mode but max_dtr = 50000000 <4>[ 8.995300] mmc2: host does not support reading read-only switch. assuming write-enable. <6>[ 8.995330] mmc2: new high speed SDHC card at address e624 <6>[ 8.995788] mmcblk1: mmc2:e624 SU08G 7.40 GiB <6>[ 8.996276] mmcblk1: p1 <6>[ 9.055969] msm_spi_clock_set: 10000000 <3>[ 9.128265] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem <6>[ 9.129364] EXT3-fs (mmcblk0p27): error: can't find ext3 filesystem on dev mmcblk0p27. <3>[ 9.196777] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem <6>[ 9.197875] EXT3-fs (mmcblk0p27): error: can't find ext3 filesystem on dev mmcblk0p27. <3>[ 9.265411] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem <6>[ 9.266418] EXT3-fs (mmcblk0p27): error: can't find ext3 filesystem on dev mmcblk0p27. <6>[ 14.096282] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 1 <6>[ 14.096405] [ATS][volume_down][successful] <6>[ 14.253601] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 0 <6>[ 14.434295] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 1 <6>[ 14.434478] [ATS][volume_down][successful] <6>[ 14.534759] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 0 <6>[ 14.673248] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 1 <6>[ 14.673370] [ATS][volume_down][successful] <6>[ 14.777679] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 0 <6>[ 14.892791] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 1 <6>[ 14.892974] [ATS][volume_down][successful] <6>[ 14.989898] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 0 <6>[ 15.099121] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 1 <6>[ 15.099243] [ATS][volume_down][successful] <6>[ 15.217041] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 0 <6>[ 15.367950] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 1 <6>[ 15.368133] [ATS][volume_down][successful] <6>[ 15.474517] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 0 <6>[ 15.694885] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 1 <6>[ 15.874206] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 0 <6>[ 17.691284] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 1 <3>[ 17.734313] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem <6>[ 17.735321] EXT3-fs (mmcblk0p27): error: can't find ext3 filesystem on dev mmcblk0p27. <6>[ 17.908843] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 0 <6>[ 19.162658] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 1 <3>[ 19.191375] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem <6>[ 19.192443] EXT3-fs (mmcblk0p27): error: can't find ext3 filesystem on dev mmcblk0p27. <6>[ 19.322662] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 0 <6>[ 19.980072] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 1 <6>[ 19.980194] [ATS][volume_down][successful] <6>[ 20.159301] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 0 <6>[ 20.232208] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 1 <3>[ 20.271820] EXT3-fs (mmcblk0p26): error: couldn't mount because of unsupported optional features (40) <6>[ 20.415100] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 0 <6>[ 20.868377] EXT4-fs (mmcblk0p26): recovery complete <6>[ 20.876220] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: <6>[ 21.667602] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 1 <6>[ 21.667816] [ATS][volume_down][successful] <6>[ 21.819610] [KEY] gpio_keys_scan_keys: key 1-114, 2 (196) changed to 0 <6>[ 21.908233] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 1 <6>[ 22.040283] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 0 <6>[ 66.851074] Release 'boot-time' perf_lock <6>[ 67.301879] Release 'boot-time' no_halt_lock <6>[ 67.853546] perflock_notifier_call: cpufreq recover policy 245760 1024000 <3>[ 247.617523] INFO: task rpcrouter:274 blocked for more than 120 seconds. <3>[ 247.618255] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. <6>[ 247.619018] rpcrouter D c0425f80 0 274 2 0x00000000 <4>[ 247.620178] Backtrace: <4>[ 247.621032] [] (schedule+0x0/0x450) from [] (rr_read+0x178/0x1a4) <4>[ 247.621826] [] (rr_read+0x0/0x1a4) from [] (do_read_data+0x1c/0xa08) <4>[ 247.622619] [] (do_read_data+0x0/0xa08) from [] (worker_thread+0x18c/0x238) <4>[ 247.623382] [] (worker_thread+0x0/0x238) from [] (kthread+0x84/0x8c) <4>[ 247.623840] [] (kthread+0x0/0x8c) from [] (do_exit+0x0/0x6ac) <4>[ 247.624572] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c2bd70 <3>[ 247.626831] INFO: task audio_mvs:428 blocked for more than 120 seconds. <3>[ 247.627227] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. <6>[ 247.628021] audio_mvs D c0425f80 0 428 2 0x00000000 <4>[ 247.629211] Backtrace: <4>[ 247.630340] [] (schedule+0x0/0x450) from [] (__msm_rpc_read+0x22c/0xa4c) <4>[ 247.630798] [] (__msm_rpc_read+0x0/0xa4c) from [] (msm_rpc_read+0x1c/0x88) <4>[ 247.631591] [] (msm_rpc_read+0x0/0x88) from [] (audio_mvs_thread+0x4c/0x164) <4>[ 247.632354] r6:00000000 r5:c7e55f9c r4:c05ef368 <4>[ 247.633911] [] (audio_mvs_thread+0x0/0x164) from [] (kthread+0x84/0x8c) <4>[ 247.634674] r8:00000000 r7:c05ef368 r6:c0074ee8 r5:c7e55fcc r4:c7c1df48 <4>[ 247.637329] [] (kthread+0x0/0x8c) from [] (do_exit+0x0/0x6ac) <4>[ 247.637817] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df48 <3>[ 247.640045] INFO: task krmt_storagecln:460 blocked for more than 120 seconds. <3>[ 247.640472] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. <6>[ 247.641204] krmt_storagecln D c0425f80 0 460 2 0x00000000 <4>[ 247.642669] Backtrace: <4>[ 247.643463] [] (schedule+0x0/0x450) from [] (rpc_clients_cb_thread+0x98/0x1b0) <4>[ 247.644226] [] (rpc_clients_cb_thread+0x0/0x1b0) from [] (kthread+0x84/0x8c) <4>[ 247.644683] [] (kthread+0x0/0x8c) from [] (do_exit+0x0/0x6ac) <4>[ 247.645446] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1ddf8 <3>[ 247.647766] INFO: task voice:740 blocked for more than 120 seconds. <3>[ 247.648162] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. <6>[ 247.648895] voice D c0425f80 0 740 2 0x00000000 <4>[ 247.650024] Backtrace: <4>[ 247.651153] [] (schedule+0x0/0x450) from [] (schedule_timeout+0x24/0x23c) <4>[ 247.651611] [] (schedule_timeout+0x0/0x23c) from [] (wait_for_common+0x12c/0x1f0) <4>[ 247.652374] r7:c7796000 r6:00000002 r5:c05eaf44 r4:7fffffff <4>[ 247.654632] [] (wait_for_common+0x0/0x1f0) from [] (wait_for_completion+0x1c/0x20) <4>[ 247.655426] [] (wait_for_completion+0x0/0x20) from [] (voice_thread+0x6c/0x554) <4>[ 247.655883] [] (voice_thread+0x0/0x554) from [] (kthread+0x84/0x8c) <4>[ 247.656677] [] (kthread+0x0/0x8c) from [] (do_exit+0x0/0x6ac) <4>[ 247.657440] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df30 <6>[ 262.612823] [BATT] M2A_RPC: set_charging: 0 at 255821564712 (2011-04-22 21:07:22.247439089 UTC) <6>[ 262.613983] Switch charger OFF <6>[ 262.679229] [BATT] M2A_RPC: level_update: 99 at 255887845245 (2011-04-22 21:07:22.313780600 UTC) <6>[ 262.681243] [BATT] power_supply_changed: battery at 255889552560 (2011-04-22 21:07:22.315823280 UTC) <6>[ 262.684204] [BATT] M2A_RPC: set_charging: 1 at 255892601335 (2011-04-22 21:07:22.318780592 UTC) <6>[ 262.685424] Switch charger ON (SLOW) <6>[ 262.687011] batt: Switch charger ON (SLOW): regh 0x03=83 <6>[ 262.688568] [BATT] M2A_RPC: cable_update: USB at 255897204985 (2011-04-22 21:07:22.323109852 UTC) <6>[ 262.689727] [BATT] htc_cable_status_update: 0 -> 1 <6>[ 262.690490] [USB] msm_hsusb_set_vbus_state: 1 <6>[ 262.690917] [USB] hsusb: OFFLINE -> ONLINE <6>[ 262.691314] [USB] lpm exit <6>[ 262.694335] [USB] hsusb: reset controller <6>[ 262.737487] msm_hsusb_phy_reset <6>[ 262.882415] [USB] ulpi: write 0x06 to 0x36 <6>[ 262.883087] [USB] ulpi: write 0x0c to 0x31 <6>[ 262.883422] [USB] ulpi: write 0x31 to 0x32 <6>[ 262.883789] [USB] ulpi: write 0x01 to 0x0d <6>[ 262.884429] [USB] ulpi: write 0x01 to 0x10 <6>[ 262.884857] [USB] handle_notify_offline: notify offline <6>[ 262.885528] [USB] msm_hsusb: enable pullup <6>[ 262.888916] [USB] suspend <6>[ 262.902404] [USB] not AC charger <6>[ 263.047576] [USB] reset <6>[ 263.048248] [USB] send connect type 1 <6>[ 263.048614] Touch: cable change to 1 <6>[ 263.049499] [USB] portchange USB_SPEED_HIGH <6>[ 263.051025] fsg_set_ums_state: 1 <6>[ 263.051391] ums: set state 1 <6>[ 263.052276] [BATT] online=1 <6>[ 263.052795] [BATT] Update SMEM: cable type 1 at 256261320844 (2011-04-22 21:07:22.687012297 UTC) <6>[ 263.208435] android_usb gadget: high speed config #1: android <6>[ 263.209167] adb_function_set_alt: maxsize = 512 <6>[ 263.209625] ums: set state 1 <6>[ 264.338897] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 1 <3>[ 264.371582] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem <6>[ 264.372589] EXT3-fs (mmcblk0p27): error: can't find ext3 filesystem on dev mmcblk0p27. <6>[ 264.523681] [KEY] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 0