./avrdude -C./avrdude.conf -pm2560 -cstk500v2 -P/dev/ttyACM0 -b115200 -D -Uflash:w:/tmp/build4036003935059628043.tmp/ASCIITable2.cpp.hex -v -v avrdude: Version 5.4-arduino, compiled on Feb 16 2011 at 20:52:19 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ System wide configuration file is "./avrdude.conf" User configuration file is "/home/mark/.avrduderc" User configuration file does not exist or is not a regular file, skipping Using Port : /dev/ttyACM0 Using Programmer : stk500v2 Overriding Baud Rate : 115200 AVR Part : ATMEGA2560 Chip Erase delay : 9000 us PAGEL : PD7 BS2 : PA0 RESET disposition : dedicated RETRY pulse : SCK serial program mode : yes parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 ByteDelay : 0 PollIndex : 3 PollValue : 0x53 Memory Detail : Block Poll Page Polled Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- eeprom 65 10 8 0 no 4096 8 0 9000 9000 0x00 0x00 flash 65 10 256 0 yes 262144 256 1024 4500 4500 0x00 0x00 lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 Programmer Type : STK500V2 Description : Atmel STK500 Version 2.x firmware Programmer Model: AVRISP Hardware Version: 15 Firmware Version: 2.10 Vtarget : 0.0 V SCK period : 0.1 us avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.02s avrdude: Device signature = 0x1e9801 avrdude: safemode: lfuse reads as 0 avrdude: safemode: hfuse reads as 0 avrdude: safemode: efuse reads as 0 avrdude: reading input file "/tmp/build4036003935059628043.tmp/ASCIITable2.cpp.hex" avrdude: input file /tmp/build4036003935059628043.tmp/ASCIITable2.cpp.hex auto detected as Intel Hex avrdude: writing flash (3074 bytes): Writing | ################################################## | 100% 0.46s avrdude: 3074 bytes of flash written avrdude: verifying flash memory against /tmp/build4036003935059628043.tmp/ASCIITable2.cpp.hex: avrdude: load data flash data from input file /tmp/build4036003935059628043.tmp/ASCIITable2.cpp.hex: avrdude: input file /tmp/build4036003935059628043.tmp/ASCIITable2.cpp.hex auto detected as Intel Hex avrdude: input file /tmp/build4036003935059628043.tmp/ASCIITable2.cpp.hex contains 3074 bytes avrdude: reading on-chip flash data: Reading | ################################################## | 100% 0.35s avrdude: verifying ... avrdude: 3074 bytes of flash verified avrdude: safemode: lfuse reads as 0 avrdude: safemode: hfuse reads as 0 avrdude: safemode: efuse reads as 0 avrdude: safemode: Fuses OK avrdude done. Thank you.