/* PIC32 Peripheral library functions and macros */
#include <plib.h>
#include <stdint.h>

/* Configuration Bits */
#pragma config FNOSC    = PRIPLL        // Oscillator Selection
#pragma config FPLLIDIV = DIV_2         // PLL Input Divider (PIC32 Starter Kit: use divide by 2 only)
#pragma config FPLLMUL  = MUL_20        // PLL Multiplier
#pragma config FPLLODIV = DIV_1         // PLL Output Divider
#pragma config FPBDIV   = DIV_1         // Peripheral Clock divisor
#pragma config FWDTEN   = OFF           // Watchdog Timer
#pragma config WDTPS    = PS1           // Watchdog Timer Postscale
#pragma config FCKSM    = CSDCMD        // Clock Switching & Fail Safe Clock Monitor
#pragma config OSCIOFNC = OFF           // CLKO Enable
#pragma config POSCMOD  = XT            // Primary Oscillator
#pragma config IESO     = OFF           // Internal/External Switch-over
#pragma config FSOSCEN  = OFF           // Secondary Oscillator Enable
#pragma config CP       = OFF           // Code Protect
#pragma config BWP      = OFF           // Boot Flash Write Protect
#pragma config PWP      = OFF           // Program Flash Write Protect
#pragma config ICESEL   = ICS_PGx2      // ICE/ICD Comm Channel Select
#pragma config DEBUG    = OFF           // Debugger Disabled for Starter Kit



int main(void)
{
    uint64_t framebuffer[128];
	        
        //Configure Timer to count to 80 at a 80Mhz Clock: 1Mhz Clock
        OpenTimer2(T2_ON|T2_PS_1_1|T2_IDLE_CON,80);


        OpenOC1(OC_ON|OC_IDLE_CON|OC_TIMER_MODE16|OC_TIMER2_SRC|OC_CONTINUE_PULSE,39,0);
        ConfigIntOC1(OC_INT_ON | OC_INT_PRIOR_2 );

        // second timer full line
        // bisschen mehr für das umaddressieren hinzufügen!!!!
        OpenTimer3(T3_ON|T3_PS_1_1|T3_IDLE_CON,10240);
        OpenOC2(OC_ON|OC_IDLE_CON|OC_TIMER_MODE16|OC_TIMER3_SRC|OC_CONTINUE_PULSE,0,5119);
        ConfigIntOC2(OC_INT_ON | OC_INT_PRIOR_3 );
        OpenOC3(OC_ON|OC_IDLE_CON|OC_TIMER_MODE16|OC_TIMER3_SRC|OC_CONTINUE_PULSE,5119,10239);
        OpenOC4(OC_ON|OC_IDLE_CON|OC_TIMER_MODE16|OC_TIMER3_SRC|OC_CONTINUE_PULSE,10230,10001);

        mPORTDSetPinsDigitalOut(BIT_8|BIT_9|BIT_10|BIT_11|BIT_12|BIT_13|BIT_14|BIT_15);
        mPORTDSetBits(BIT_8|BIT_9|BIT_10|BIT_11|BIT_12|BIT_13|BIT_14|BIT_15);

        DmaChnOpen(0, DMA_CHN_PRI1,DMA_OPEN_DEFAULT);
        DmaChnSetTxfer(0,&framebuffer[0],&PORTD+1,128,1,2);
        DmaChnSetEventControl(0,DMA_EV_START_IRQ_EN|DMA_EV_START_IRQ(INT_OC1));
        DmaChnEnable(0);
        DmaChnForceTxfer(0);

	while(1);

}