# This is a sample ~/.gammurc file. # In Unix/Linux copy it into your home directory and name it .gammurc # or into /etc and name it gammurc # In Win32 copy it into directory with Gammu.exe and name gammurc # More about parameters later # ----------------------------------------------------------------------------- [gammu] port = com8: #model = 6110 connection = fbusblue #synchronizetime = yes #logfile = gammulog #logformat = textall #use_locking = yes #gammuloc = locfile #startinfo = yes #gammucoding = utf8 #rsslevel = teststable #usephonedb = yes [gammu1] port = com8: #model = 6110 connection = fbusblue #synchronizetime = yes #logfile = gammulog #logformat = textall #use_locking = yes #gammuloc = locfile #startinfo = yes #gammucoding = utf8 # Step 1. Please find required Connection parameter and look into assigned # with it port type. With some Connection you must set concrete model # ================================================================ cables ===== # New Nokia protocol for FBUS/DAU9P # Connection "fbus", port type serial # New Nokia protocol for DLR3/DLR3P # Connection "fbusdlr3"/"dlr3", port type serial # New Nokia protocol for DKU2 (and phone with USB converter on phone mainboard # like 6230) # Connection "dku2phonet"/"dku2", port type dku2 # New Nokia protocol for DKU5 (and phone without USB converter on phone # mainboard like 5100) # Connection "dku5fbus"/"dku5", port type dku5 # New Nokia protocol for PL2303 USB cable (and phone without USB converter # on phone mainboard like 5100) # Connection "fbuspl2303", port type usb # Old Nokia protocol for MBUS/DAU9P # Connection "mbus", port type serial # ----------------------------------------------------------------------------- # AT commands for DLR3, DKU5 or other AT compatible cable (8 bits, None # parity, no flow control, 1 stop bit). Used with Nokia, Alcatel, Siemens, etc. # Connection "at19200"/"at115200"/.., port type serial # AT commands for DKU2 cable # Connection "dku2at", port type dku2 # ============================================================== infrared ===== # Nokia protocol for infrared with Nokia 6110/6130/6150 # Connection "fbusirda"/"infrared", port type serial # Nokia protocol for infrared with other Nokia models # Connection "irdaphonet"/"irda", port type irda # ----------------------------------------------------------------------------- # AT commands for infrared. Used with Nokia, Alcatel, Siemens, etc. # Connection "irdaat", port type irda # ----------------------------------------------------------------------------- # OBEX for infrared # Connection "irdaobex", port type irda. Must be used with model "obex" # ============================================================= Bluetooth ===== # Nokia protocol with serial port set in BT stack (WidComm, other) from # adequate service and Nokia 6210 # Connection "fbusblue", port type serial # Nokia protocol with serial port set in BT stack (WidComm, other) from # adequate service and other Nokia models # Connection "phonetblue", port type serial # ----------------------------------------------------------------------------- # Nokia protocol for Bluetooth stack with Nokia 6210 # Connection "bluerffbus", port type BT # Nokia protocol for Bluetooth stack with DCT4 Nokia models, which don't inform # about services correctly (6310, 6310i with firmware lower than 5.50, 8910,..) # Connection "bluerfphonet", port type BT # Nokia protocol for Bluetooth stack with other DCT4 Nokia models # Connection "bluephonet", port type BT # ----------------------------------------------------------------------------- # AT commands for Bluetooth stack and 6210 / DCT4 Nokia models, which don't # inform about BT services correctly (6310, 6310i with firmware lower # than 5.50, 8910,..) # Connection "bluerfat", port type BT # AT commands for Bluetooth stack with other phones (Siemens, other Nokia,etc.) # Connection "blueat", port type BT # ----------------------------------------------------------------------------- # OBEX for Bluetooth stack with DCT4 Nokia models, which don't inform about # BT services correctly (6310, 6310i with firmware lower than 5.50, 8910,...) # Connection "bluerfobex", port type BT # OBEX for Bluetooth stack with other phones (Siemens, other Nokia, etc.) # Connection "blueobex", port type BT. Must be used with model "obex" # Step2. According to port type from Step1 and used OS set Port parameter # ----------------------------------------------------------------------------- # Port type | "Port" parameter in Windows/DOS | "Port" parameter in Linux/Unix # ----------|---------------------------------|-------------------------------- # serial | "com*:" | "/dev/ttyS*" # | (example "com1:") | (example "/dev/ttyS1") # | | or "/dev/tts/**" (with DevFS) # ----------|---------------------------------|-------------------------------- # irda | ignored (can be empty) | "/dev/ircomm*" # ----------|---------------------------------|-------------------------------- # BT | Bluetooth device address # | (example "") # ----------|---------------------------------|-------------------------------- # dku2 | ignored (can be empty) | /dev/ttyUSB* or /dev/ttyACM* # ----------|---------------------------------|-------------------------------- # dku5 | ignored (can be empty) | connection with it not possible # ----------|---------------------------------|-------------------------------- # usb | connection with it not possible | "/dev/ttyUSB*" # Step3. Set other config parameters # ----------------------------------------------------------------------------- # Parameter name | Description # ----------------|------------------------------------------------------------ # Model | use only, when Gammu doesn't recognize your phone model. # | Put it here. Example values: "6110", "6150", "6210", "8210" # SynchronizeTime | if you want to set time from computer to phone during # | starting connection. Do not rather use this option when # | when to reset phone during connection (in some phones need # | to set time again after restart) # GammuLoc | name of localisation file # StartInfo | this option allow to set, that you want (setting "yes") # | to see message on the phone screen or phone should enable # | light for a moment during starting connection. Phone # | WON'T beep during starting connection with this option. # GammuCoding | forces using specified codepage (in win32 - for example # | "1250" will force CP1250) or UTF8 (in Linux - "utf8") # ----------------|------------------------------------------------------------ # Logfile | Use, when want to have logfile from communication. # Logformat | What debug info and format should be used: # | "nothing" - no debug level (default) # | "text" - transmission dump in text format # | "textall" - all possible info in text format # | "errors" - errors in text format # | "binary" - transmission dump in binary format # ----------------|------------------------------------------------------------ # Use_Locking | under Unix/Linux use "yes", if want to lock used device # | to prevent using it by other applications. In win32 ignored # ----------------|------------------------------------------------------------ # RSSLevel | Should Gammu connect to www.mwiacek.com and check for new # | versions ? # | if yes, there will be taken # | www.mwiacek.com/gsm/soft/gammu.rss file, read latest version # | numbers and (if any exist) displayed info to user on each # | application startup # | "teststable" - check for latest stable and test versions # | "stable" - check for latest stable versions # | No private data are sent to server, Internet connection # | to www.mwiacek.com on port 80 required # | By default option not active # ----------------|------------------------------------------------------------ # UsePhoneDB | Should Gammu connect to www.gammu.org and check for latest # | firmware versions for device ? # | if yes (value "yes"), there will be taken # |www.gammu.org/gammunet/support/phones/phonedbxml.php?model=x # | file, read all phone details from it and (if any # | higher firmware exist) displayed info to user on each # | application startup # | No private data are sent to server, Internet connection # | to www.gammu.org on port 80 required # | By default option not active