# Checklist for installed Unix/Linux TS servers to be used
# for sanity tests before hand-over to customer.
# The HUB Site Configuration setup collection may be necessary
#
# Limitation: NO legacy environment, only Hubs
#
# Rev 0.1 2011-02-25
# Jonas Jerlin
# Addition of Solaris
#
# Rev 0.2 2011-02-28
# Jonas Jerlin
# List made shorter, only Solaris/Linux  when it differs
#
# Rev 0.3 2011-03-18
# Jonas Jerlin
# Added firmware and partitioning check
#
# Rev 0.4 2011-03-31
# Jonas Jerlin
# Added comments
#
# Rev 0.5 2011-04-05
# Jonas Jerlin
# Added openafs version for LMWP 3.0
#
# Rev 0.6 2011-04-11
# Jonas Jerlin
# Added check for WRITE_HOSTNAME_TO_HOSTS
# and 127.0.0.2 in /etc/hosts
#
# Rev 0.7 2011-04-19
# Michael Tosch
# replace 127.0.0.2 by fixed IP address
# (otherwise bad apps need external resolver)

# Rev 0.8 2011-05-02
# Jonas Jerlin
# Added nxnode subscription test

# Rev 0.8 2011-05-20
# Michael Tosch
# Fixes: swap, nxnode/server,df,pkginfo,hpsa

# Rev 0.9 2011-07-08
# Jonas Jerlin
# Added check for Cache Size in disk controller
# Todo: what is the lower limit ?

# Rev 1.0 2011-07-27
# Michael Tosch
# Cups, /root permission, nsswitch.conf

# Rev 1.1 2011-08-18
# Jonas Jerlin
# Additional checks for RUN_UPDATEDB and RUN_PARALLEL
#############################################
#############################################

# Check kernel version
uname -a

# Check firmware version, Linux
#   BIOS   MUST NOT be October version 2010, January 2011 or later is preferred.
#          MUST NOT be December version 2010, 12/01/2010
dmidecode -t bios | head -10
#   iLO, login to ILO or if hponcfg is installed on commandline
# At least 2.0
hponcfg
#   Smart-array driver, at least 3.0
cat /proc/driver/cciss/cciss0

# Find all slots used
hpacucli ctrl all show
# Check Cache size for the used slot
hpacucli ctrl slot=<slot number> show |grep "Cache Size"

# Check local disk partitioning.
# At least 25GB for / and at least 100MB for /boot
df -lh | head

# Check for /etc/rndrelease
cat /etc/*release

# Check if  /etc/hpsa  is present,
# only present if installed by Opsware(=HPSA)
cat /etc/hpsa  # Linux

# Check if enough swap space is allocated, long term formula RAM_GB^0.8 * 1.5
free -g         # Linux , 20-30 GB
swap -l         # Solaris, 40-80,000,000 blocks

# Check if DNS setup is ok
cat /etc/resolv.conf # if it has Hub nameservers

# Check NTP setup
ntpq -p

# Check timezone, and correct time
date

# Check automount of home-directories
cat /etc/auto.master # has "/home ... auto.homehub", before an optional "+auto.master"
df /home # is automount

# Check if VAS is correctly setup
domainname # is the same as the Hubsite NIS domain
ypwhich # is localhost(VAS)
/opt/quest/bin/vastool status

# Check NIC redundancy setup
ifconfig -a # Linux   look for bond0
ifconfig -a # Solaris look for aggr1

# Check if WRITE_HOSTNAME_TO_HOSTS is set to "no"
# Default in SLED11 but not in SLED 10.
# If not there, add
grep WRITE_HOSTNAME_TO_HOSTS /etc/sysconfig/network/dhcp
# Check if RUN_UPDATEDB is set to "no"
grep 'RUN_UPDATEDB=' /etc/sysconfig/locate
# Check if RUN_PARALLEL is set to "no"
grep RUN_PARALLEL /etc/sysconfig/boot
# If there - replace by real IP address (from ifconfig -a or host `hostname`)
grep 127.0.0.2 /etc/hosts

# Check ClearCase version and that it is working
# General recommendation if not stated other version 7.1.1.3
# For SLED 10 7.1.1.3 and 7.1.1.4 crash when restarted; 7.1.1.1 okay
# SLED 11 SP1 needs 7.1.1.4
/usr/atria/bin/cleartool -ver
/usr/atria/bin/cleartool lsview -short
/usr/atria/bin/cleartool startview ...

# Check AFS is working and AFS version >= 1.4.12.1-2
#                 LMWP 3.0 AFS version >= 1.4.11-4.1
ls -ld /app /env /etc/home
pkginfo | grep -i afs | while read skip pkg skip; do pkginfo -x $pkg; done # Solaris
rpm -qa | grep -i afs                   # Linux

# Check ERM
grep <your ERM account>  /etc/passwd
login using your ERM account
nsu  # possible to become root ?

# Check ESL (In production ?, outages ?, is ERM push working )


### Check NX Start
rpm -qa | grep -i nx

# Check version of installed NX (not all components are always installed)
# At least nxnode 3.4.0-16, nxserver 3.4.0-17,  nxclient 3.4.0-7
#
# NX server checks
nxserver --nodelist # From server, is this a node or a server ?
                   # Is the server a node in its cluster ?
nxserver --subscription # (type of license, is it temporary?  Is a license ordered ?)
# NX node checks
nxnode --subscription # (type of license, is it temporary?  Is a license ordered ?)
### Check NX End


### Check Citrix Start
pkginfo | grep -i ctx

# Correct version of Citrix?
showrev -p | grep PSE  #Should return PSE400SOL063 (latest patch available  2011-02-24) , otherwise this server should be patched

/opt/CTXSmf/sbin/ctxfarm -l  (from any Citrix server, show  farm members and master)
echo list | /opt/CTXSmf/sbin/ctxlsdcfg  (displays license configuration)
### Check Citrix End

# Cups, /root permission, nsswitch.conf
/app/adm/ts/lts_system_finish.sh # Linux
/app/adm/ts/uts_system_finish.sh # Solaris