Serial Number: L40G6YYC Firmware Version: YAH814Y0 User Capacity: 40,982,151,168 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 0 Local Time is: Sat Feb 4 18:57:06 2012 CST SMART support is: Available - device has SMART capability. SMART support is: Disabled === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 118) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 30) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 31) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 1 3 Spin_Up_Time 0x0027 221 221 063 Pre-fail Always - 9940 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 77 5 Reallocated_Sector_Ct 0x0033 240 001 063 Pre-fail Always In_th e_past 33 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 231 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 253 247 187 Pre-fail Always - 51371 9 Power_On_Minutes 0x0032 253 253 000 Old_age Always - 182h+07m 10 Spin_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 247 247 000 Old_age Always - 2540 196 Reallocated_Event_Count 0x0008 252 252 000 Old_age Offline - 1 197 Current_Pending_Sector 0x0008 232 001 000 Old_age Offline - 21 198 Offline_Uncorrectable 0x0008 252 252 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0008 197 197 000 Old_age Offline - 6 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 16 202 Data_Address_Mark_Errs 0x000a 253 238 000 Old_age Always - 0 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0 204 Soft_ECC_Correction 0x000a 253 249 000 Old_age Always - 0 205 Thermal_Asperity_Rate 0x000a 253 216 000 Old_age Always - 0 207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0 209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0 96 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 97 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 98 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 SMART Error Log Version: 1 ATA Error Count: 4440 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4440 occurred at disk power-on lifetime: 162 hours (6 days + 18 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 42 9e 1b 40 e2 Error: ICRC, ABRT at LBA = 0x02401b9e = 37755806 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 e0 1a 40 e2 08 00:41:09.840 WRITE DMA f8 00 00 00 00 00 e0 08 00:41:09.824 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 0a 00:41:09.824 IDENTIFY DEVICE ef 03 44 00 00 00 a0 0a 00:41:09.824 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 08 00:41:09.824 READ NATIVE MAX ADDRESS Error 4439 occurred at disk power-on lifetime: 162 hours (6 days + 18 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 3a a6 1b 40 e2 Error: ICRC, ABRT at LBA = 0x02401ba6 = 37755814 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 e0 1a 40 e2 08 00:41:09.536 WRITE DMA ca 00 00 e0 19 40 e2 08 00:41:09.536 WRITE DMA ca 00 30 c8 68 01 e3 08 00:41:09.536 WRITE DMA ca 00 10 58 89 00 e3 08 00:41:09.536 WRITE DMA ca 00 10 e8 cd ff e2 08 00:41:09.536 WRITE DMA Error 4438 occurred at disk power-on lifetime: 162 hours (6 days + 18 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 e0 08 00:39:54.560 READ DMA f8 00 00 00 00 00 e0 08 00:39:54.544 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 0a 00:39:54.528 IDENTIFY DEVICE ef 03 45 00 00 00 a0 0a 00:39:54.528 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 08 00:39:54.528 READ NATIVE MAX ADDRESS Error 4437 occurred at disk power-on lifetime: 162 hours (6 days + 18 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 e0 08 00:39:54.368 READ DMA f8 00 00 00 00 00 e0 08 00:39:54.192 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 0a 00:39:54.192 IDENTIFY DEVICE ef 03 45 00 00 00 a0 0a 00:39:54.192 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 08 00:39:54.192 READ NATIVE MAX ADDRESS Error 4436 occurred at disk power-on lifetime: 162 hours (6 days + 18 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 05 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 00 05 01 00 00 a0 08 00:39:43.680 IDENTIFY PACKET DEVICE ca 00 10 20 ca 00 e3 08 00:39:37.712 WRITE DMA ca 00 08 48 89 00 e3 08 00:39:37.712 WRITE DMA ca 00 10 08 09 00 e3 08 00:39:37.712 WRITE DMA ca 00 08 18 08 00 e3 08 00:39:37.696 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error # 1 Short captive Completed: read failure 60% 41 293 0191 Device does not support Selective Self Tests/Logging