int led = 13; // 7
int count =0;
void setup() {           
//Serial.begin(9600);  
//  // initialize the digital pin as an output.
//  // Pin 13 has an LED connected on most Arduino boards:
//  pinMode(led, OUTPUT);   
//delay(5000);  
}

void loop() {
//  digitalWrite(led, HIGH);   // set the LED on
//  delay(100);              // wait for a second
//  digitalWrite(led, LOW);    // set the LED off
//  delay(100);  // wait for a second
//  delay(1000);
Serial.begin(9600); 
delay(1000);
  Serial.print(count);
  count++;
  Serial.println(" loop");
  Serial.end(); 
  delay(1000);
}




mog@flashman:~/nonapt/simavr/examples/board_simduino$ ./obj-x86_64-linux-gnu/simduino.elf 
Starting atmega328 - flashend 7fff ramend 08ff e2end 03ff
atmega328 init
read_ihex_file: ATmegaBOOT_168_atmega328.ihex, unsupported check type 03
Booloader 7800: 1950
uart_pty_init bridge on port *** /dev/pts/6 ***
UART-0 configured to 0010 = 58823 bps, 5 data 1 stop
Roughtly 136 usec per bytes
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0000 (128)
Writing page 0000 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0001 (128)
Writing page 0001 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0002 (128)
Writing page 0002 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0003 (128)
Writing page 0003 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0004 (128)
Writing page 0004 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0005 (128)
Writing page 0005 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0006 (128)
Writing page 0006 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0007 (128)
Writing page 0007 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0008 (128)
Writing page 0008 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0009 (128)
Writing page 0009 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 000a (128)
Writing page 000a (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 000b (128)
Writing page 000b (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 000c (128)
Writing page 000c (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 000d (128)
Writing page 000d (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 000e (128)
Writing page 000e (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 000f (128)
Writing page 000f (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0010 (128)
Writing page 0010 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0011 (128)
Writing page 0011 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0012 (128)
Writing page 0012 (128)
uart_pty_xoff_hook
uart_pty_xon_hook
uart_pty_xoff_hook
uart_pty_xon_hook
Erasing page 0013 (128)
Writing page 0013 (128)
Erasing page 0014 (128)
Writing page 0014 (128)
avr_timer_reconfigure-0 clock turned off
avr_timer_reconfigure-0 clock turned off
avr_timer_configure-0 TOP 7812.50Hz = 2048 cycles
avr_timer_configure-0 TOP 976.56Hz = 16384 cycles
avr_timer_configure-1 TOP 30.52Hz = 524288 cycles
avr_timer_configure-1 TOP 3.81Hz = 4194304 cycles
avr_timer_reconfigure-1 unsupported timer mode wgm=1 (0)
avr_timer_configure-2 TOP 976.56Hz = 16384 cycles
avr_timer_reconfigure-2 unsupported timer mode wgm=1 (0)
ADC Start AREF 0 AVCC 0
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes
UART-0 configured to 00cf = 4807 bps, 8 data 1 stop
Roughtly 2288 usec per bytes