smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: TOSHIBA MK3265GSX Serial Number: Y0S1D1LGB Firmware Version: GJ002C User Capacity: 320,072,933,376 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Mar 27 20:26:09 2012 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 80) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0007 100 100 050 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 100 100 002 Pre-fail Always - 1238 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 243 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 129 10 Spin_Retry_Count 0x0013 104 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 241 183 Runtime_Bad_Block 0x0022 100 100 001 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 185 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 65535 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 12485 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 16 189 High_Fly_Writes 0x003a 100 100 001 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 059 047 045 Old_age Always - 41 (Lifetime Min/Max 39/42) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 10 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6815848 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 935 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 17 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 16624 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 16624 occurred at disk power-on lifetime: 129 hours (5 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 02 7f 0d 66 60 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 01 00 7f 0d 66 40 08 00:02:24.757 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 00:02:24.757 SET FEATURES [Reserved for Serial ATA] ec 00 00 00 00 00 a0 00 00:02:24.756 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:02:24.756 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 00 00:02:24.756 SET FEATURES [Reserved for Serial ATA] Error 16623 occurred at disk power-on lifetime: 129 hours (5 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 02 7f 0d 66 60 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 01 00 7f 0d 66 40 08 00:02:20.202 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 00:02:20.201 SET FEATURES [Reserved for Serial ATA] ec 00 00 00 00 00 a0 00 00:02:20.201 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:02:20.201 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 00 00:02:20.201 SET FEATURES [Reserved for Serial ATA] Error 16622 occurred at disk power-on lifetime: 129 hours (5 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 02 7f 0d 66 60 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 01 00 7f 0d 66 40 08 00:02:16.090 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 00:02:16.090 SET FEATURES [Reserved for Serial ATA] ec 00 00 00 00 00 a0 00 00:02:16.090 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:02:16.090 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 00 00:02:16.090 SET FEATURES [Reserved for Serial ATA] Error 16621 occurred at disk power-on lifetime: 129 hours (5 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 02 7f 0d 66 60 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 01 00 7f 0d 66 40 08 00:02:11.613 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 00:02:11.613 SET FEATURES [Reserved for Serial ATA] ec 00 00 00 00 00 a0 00 00:02:11.612 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:02:11.612 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 00 00:02:11.612 SET FEATURES [Reserved for Serial ATA] Error 16620 occurred at disk power-on lifetime: 129 hours (5 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 02 7f 0d 66 60 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 01 00 7f 0d 66 40 08 00:02:07.548 READ FPDMA QUEUED ef 10 02 00 00 00 a0 00 00:02:07.547 SET FEATURES [Reserved for Serial ATA] ec 00 00 00 00 00 a0 00 00:02:07.546 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:02:07.546 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 00 00:02:07.546 SET FEATURES [Reserved for Serial ATA] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 129 724492 # 2 Short offline Completed: read failure 90% 129 724492 # 3 Short offline Completed: read failure 90% 129 724492 # 4 Short offline Completed: read failure 90% 129 724492 # 5 Short offline Completed: read failure 90% 127 724492 # 6 Short offline Completed: read failure 90% 127 724492 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.