Linux version 2.6.11.9-chw-2 (root@devonthego.mysettopbox.tv) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 SMP Sat May 14 12:11:44 CDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS) BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 127MB LOWMEM available. On node 0 totalpages: 32752 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 28656 pages, LIFO batch:6 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 AWARD ) @ 0x000f60e0 ACPI: RSDT (v001 AWARD AWRDACPI 0x30302e31 AWRD 0x00000000) @ 0x07ff3000 ACPI: FADT (v001 AWARD AWRDACPI 0x30302e31 AWRD 0x00000000) @ 0x07ff3040 ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x5008 Allocating PCI resources starting at 08000000 (gap: 08000000:f7ff0000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=Linux ro root=301 apm=power-off nomce No local APIC present or hardware disabled mapped APIC to ffffd000 (01181000) Initializing CPU#0 PID hash table entries: 512 (order: 9, 8192 bytes) Detected 599.129 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 124108k/131008k available (2979k kernel code, 6388k reserved, 1133k data, 224k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1183.74 BogoMIPS (lpj=591872) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0081f9ff c0c1f9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0081f9ff c0c1f9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0081f9ff c0c1f9ff 00000000 00000020 00000000 00000000 00000000 Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 1e00) CPU0: AMD-K7(tm) Processor stepping 02 per-CPU timeslice cutoff: 1462.95 usecs. task migration cache decay timeout: 2 msecs. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs CPU0 attaching sched-domain: domain 0: span 0001 groups: 0001 domain 1: span 0001 groups: 0001 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 3k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb470, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Failed to disable AUX port, but continuing anyway... Is this a SiS? If AUX port is really absent please use the 'i8042.noaux' option. serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7409: IDE controller at PCI slot 0000:00:07.1 AMD7409: chipset revision 3 AMD7409: not 100% native mode: will probe irqs later AMD7409: 0000:00:07.1 (rev 03) UDMA66 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 91360U4, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 26588016 sectors (13613 MB) w/2048KiB Cache, CHS=26377/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hda3 hda4 hdc: ATAPI 16X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.10 loaded. Fusion MPT base driver 3.01.18 Copyright (c) 1999-2004 LSI Logic Corporation Fusion MPT SCSI Host driver 3.01.18 Fusion MPT misc device (ioctl) driver 3.01.18 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) mice: PS/2 mouse device common for all mice spurious 8259A interrupt: IRQ7. md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid10 personality registered as nr 9 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 652.000 MB/sec 8regs_prefetch: 804.000 MB/sec 32regs : 572.000 MB/sec 32regs_prefetch: 568.000 MB/sec pII_mmx : 1576.000 MB/sec p5_mmx : 2088.000 MB/sec raid5: using function: p5_mmx (2088.000 MB/sec) raid6: int32x1 148 MB/s raid6: int32x2 226 MB/s raid6: int32x4 167 MB/s raid6: int32x8 167 MB/s raid6: mmxx1 308 MB/s raid6: mmxx2 542 MB/s raid6: sse1x1 308 MB/s raid6: sse1x2 550 MB/s raid6: using algorithm sse1x2 (550 MB/s) md: raid6 personality registered as nr 8 md: multipath personality registered as nr 7 md: faulty personality registered as nr 10 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NET: Registered protocol family 2 IP: routing cache hash table of 256 buckets, 4Kbytes TCP established hash table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 98304 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 15 ACPI wakeup devices: PCI0 USB0 ISA ACPI: (supports S0 S1 S4 S4bios S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... <6>kjournald starting. Commit interval 5 seconds failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 224k freed Adding 879472k swap on /dev/hda2. Priority:-1 extents:1 EXT3 FS on hda1, internal journal usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI interrupt 0000:00:07.4[D] -> GSI 12 (level, low) -> IRQ 12 ohci_hcd 0000:00:07.4: Advanced Micro Devices [AMD] AMD-756 [Viper] USB ohci_hcd 0000:00:07.4: irq 12, pci mem 0xe5000000 ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:07.4: AMD756 erratum 4 workaround hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected Initializing USB Mass Storage driver... usb 1-2: new low speed USB device using ohci_hcd and address 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. usb 1-1: new low speed USB device using ohci_hcd and address 3 ieee1394: Initialized config rom entry `ip1394' Real Time Clock Driver v1.12 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] ACPI: Fan [FAN] (on) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 2 throttling states) ACPI: Thermal Zone [THRM] (22 C) Linux Kernel Card Services options: [pci] [cardbus] [pm] Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] Linux video capture interface: v1.00 usbcore: registered new driver hiddev input: USB HID v1.10 Joystick [USB Joystick ] on usb-0000:00:07.4-2 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture input: USB HID v1.00 Mouse [1241:1122] on usb-0000:00:07.4-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10 bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 10, latency: 32, mmio: 0xe5003000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] ts: Compaq touchscreen protocol output tveeprom: Hauppauge: model = 44004, rev = B129, serial# = 5220273 tveeprom: tuner = Temic 4006FH5 (idx = 29, type = 14) tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007) tveeprom: audio_processor = None (type = 0) bttv0: using tuner=14 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z bttv0: i2c: checking for TDA9887 @ 0x86... not found tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) tuner 1-0061: type set to 14 (Temic PAL_BG (4006FH5)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11 eth0: RealTek RTL8139 at 0xc89a2000, 00:50:fc:24:2f:03, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139C' Linux agpgart interface v0.100 (c) Dave Jones ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 17 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver kjournald starting. Commit interval 5 seconds EXT3 FS on hda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Disabled Privacy Extensions on device c04b6b00(lo) eth0: link down Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! lirc_dev: IR Remote Control driver registered, at major 61 lirc_serial: port 03f8 already in use lirc_serial: use 'setserial /dev/ttySX uart none' lirc_serial: or compile the serial port driver as module and lirc_serial: make sure this module is loaded first eth0: no IPv6 routers present input: PC Speaker ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 agpgart: Detected AMD Irongate chipset agpgart: Maximum main memory to use for agp memory: 94M agpgart: AGP aperture is 32M @ 0xe2000000 cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 ACPI: PCI interrupt 0000:00:0a.1[A] -> GSI 10 (level, low) -> IRQ 10 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 11 (level, low) -> IRQ 11 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005 agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode agpgart: Putting AGP V2 device at 0000:01:05.0 into 2x mode agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode agpgart: Putting AGP V2 device at 0000:01:05.0 into 2x mode