chris alsa # dmesg Linux version 2.6.17-gentoo-r8 (root@chris) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 SMP Sun Oct 22 15:45:41 Local time zone must be set--see zic BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 639MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5a80 On node 0 totalpages: 393200 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 163824 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 AOpen ) @ 0x000f7520 ACPI: RSDT (v001 AOpen AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x5fff3000 ACPI: FADT (v001 AOpen AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x5fff3040 ACPI: MADT (v001 AOpen AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x5fff8480 ACPI: DSDT (v001 AOPEN AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:12 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000) Built 1 zonelists Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda1 udev mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2000.018 MHz processor. Using tsc for high-res timesource Speakup v-2.00 CVS: Mon May 1 09:46:33 EDT 2006 : initialized Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1552812k/1572800k available (2309k kernel code, 18744k reserved, 580k data, 224k init, 655296k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4007.71 BogoMIPS (lpj=20038589) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00 Total of 1 processors activated (4007.71 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 Brought up 1 CPUs migration_cost=0 checking if image is initramfs... it is Freeing initrd memory: 2184k freed NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfaf50, last bus=1 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Quirk-MSI-K8T Soundcard On PCI: Unexpected Value in PCI-Register: no Change! Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [ALKA] (IRQs *20) ACPI: PCI Interrupt Link [ALKB] (IRQs *21) ACPI: PCI Interrupt Link [ALKC] (IRQs *22) ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 16 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:02: ioport range 0x4000-0x407f could not be reserved pnp: 00:02: ioport range 0x5000-0x500f has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: ec000000-edffffff PREFETCH window: e0000000-e7ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered highmem bounce pool size: 64 pages squashfs: version 3.0 (2006/03/15) Phillip Lougher SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler deadline registered (default) initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 ) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PDC20262: IDE controller at PCI slot 0000:00:09.0 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 19 (level, low) -> IRQ 16 PDC20262: chipset revision 1 PDC20262: ROM enabled at 0x70020000 PDC20262: 100% native mode on irq 16 PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:DMA, hdh:pio Probing IDE interface ide2... input: AT Translated Set 2 keyboard as /class/input/input0 Probing IDE interface ide3... input: ImPS/2 Generic Wheel Mouse as /class/input/input1 input: AT Translated Set 2 keyboard as /class/input/input2 VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17 PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:DMA Probing IDE interface ide0... hda: ST3120026A, ATA DISK drive hdb: WDC WD3200JB-00KFA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdd: LITE-ON DVDRW SHM-165H6S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... hda: max request size: 512KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 > hdb: max request size: 512KiB hdb: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 < hdb5 hdb6 > hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 4 Cannot allocate resource for EISA slot 5 EISA: Detected 0 cards. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 224k freed usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18 PCI: VIA IRQ fixup for 0000:00:10.4, from 11 to 2 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 18, io mem 0xee040000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18 PCI: VIA IRQ fixup for 0000:00:10.0, from 5 to 2 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 18, io base 0x0000dd00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18 PCI: VIA IRQ fixup for 0000:00:10.1, from 5 to 2 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 18, io base 0x0000de00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18 PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 2 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 18, io base 0x0000df00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18 PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 2 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 18, io base 0x0000e000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) sl811: driver sl811-hcd, 19 May 2005 ieee1394: Initialized config rom entry `ip1394' ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance libata version 1.20 loaded. sata_via 0000:00:0f.0: version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17 PCI: VIA IRQ fixup for 0000:00:0f.0, from 11 to 1 sata_via 0000:00:0f.0: routed to hard irq line 1 ata1: SATA max UDMA/133 cmd 0xD600 ctl 0xD702 bmdma 0xDA00 irq 17 ata2: SATA max UDMA/133 cmd 0xD800 ctl 0xD902 bmdma 0xDA08 irq 17 usb 3-1: new full speed USB device using uhci_hcd and address 2 ata1: SATA link down (SStatus 0) scsi0 : sata_via usb 3-1: configuration #1 chosen from 1 choice ata2: SATA link down (SStatus 0) scsi1 : sata_via usb 3-2: new full speed USB device using uhci_hcd and address 3 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 usb 3-2: configuration #1 chosen from 1 choice JFS: nTxBlock = 8192, nTxLock = 65536 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. EXT3 FS on hda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hdb6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1983988k swap on /dev/hda5. Priority:-1 extents:1 across:1983988k Real Time Clock Driver v1.12ac r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 23 (level, low) -> IRQ 19 eth0: Identified chip type is 'RTL8169s/8110s'. eth0: RTL8169 at 0xf88ec000, 00:01:80:56:40:04, IRQ 19 r8169: eth0: link down snd_ac97_codec: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_ac97_update_power r8169: eth0: link up nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20 NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 snd_via82xx: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_ac97_update_power snd_seq_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value snd_pcm_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value snd_via82xx: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_ac97_update_power snd_ac97_codec: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_ac97_update_power snd_seq_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value snd_pcm_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value snd_via82xx: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_ac97_update_power snd_ac97_codec: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_ac97_update_power snd_seq_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value snd_pcm_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value snd_via82xx: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_ac97_update_power snd_ac97_codec: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_ac97_update_power snd_seq_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value snd_pcm_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value snd_via82xx: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_ac97_update_power snd_ac97_codec: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_ac97_update_power snd_seq_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value snd_pcm_oss: Unknown symbol snd_verbose_printk snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value snd_via82xx: Unknown symbol snd_verbose_printk snd_via82xx: Unknown symbol snd_ac97_update_power chris alsa #