+Ethernet eth0: MAC address 00:c0:02:01:01:02 IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1 Default server: 0.0.0.0, DNS server IP: 0.0.0.0 RedBoot(tm) bootstrap and debug environment [ROMRAM] Red Hat certified release, version 1.92 - built 15:16:07, Feb 3 2004 Platform: IXDP425 Development Platform (XScale) Copyright (C) 2000, 2001, 2002, Red Hat, Inc. RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each. == Executing boot script in 2.000 seconds - enter ^C to abort RedBoot> boot;exec 0x01d00000 have eRcOmM copy kernel code from flash to RAM copy ramdisk file from flash to RAM run kernel Using base address 0x01d00000 and length 0x000d1a80 Uncompressing Linux.......................................................... done, booting the kernel. Linux version 2.6.12.2 (openslug@openslug.org) (gcc version 3.4.4) #1 Mon Aug 8 08:52:36 PDT 2005 CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE) CPU0: D VIVT undefined 5 cache CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets Machine: Linksys NSLU2 Warning: bad configuration page, trying to continue Memory policy: ECC disabled, Data cache writeback Built 1 zonelists Kernel command line: root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc reboot=s noirqdebug console=ttyS0,115200n8 PID hash table entries: 256 (order: 8, 4096 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 32MB = 32MB total Memory: 30592KB available (1590K code, 151K data, 80K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 PCI: IXP4xx is host PCI: IXP4xx Using indirect access for memory space PCI: bus0: Fast back to back transfers disabled dmabounce: registered device 0000:00:01.0 on pci bus dmabounce: registered device 0000:00:01.1 on pci bus dmabounce: registered device 0000:00:01.2 on pci bus SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub OpenN2 Misc I/O Driver Version 0.1.7 enable_irq(22) unbalanced from c0010cb0 enable_irq(29) unbalanced from c0010cb8 NetWinder Floating Point Emulator V0.97 (double precision) JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. Initializing Cryptographic API IXP4xx Watchdog Timer: heartbeat 60 sec Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale io scheduler noop registered io scheduler deadline registered RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000 6 RedBoot partitions found on MTD device IXP4XX-Flash.0 Creating 6 MTD partitions on "IXP4XX-Flash.0": 0x00000000-0x00040000 : "RedBoot" 0x00040000-0x00060000 : "SysConf" 0x00060000-0x00160000 : "Kernel" 0x00160000-0x00180000 : "Ramdisk" 0x00180000-0x007e0000 : "Flashdisk" 0x007e0000-0x00800000 : "FIS directory" PCI: enabling device 0000:00:01.2 (0140 -> 0142) ehci_hcd 0000:00:01.2: EHCI Host Controller ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000 ehci_hcd 0000:00:01.2: park 0 ehci_hcd 0000:00:01.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected PCI: enabling device 0000:00:01.0 (0140 -> 0142) ohci_hcd 0000:00:01.0: OHCI Host Controller ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected PCI: enabling device 0000:00:01.1 (0140 -> 0142) ohci_hcd 0000:00:01.1: OHCI Host Controller ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000 usb 1-1: new high speed USB device using ehci_hcd and address 2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. i2c /dev entries driver LOADED Xicor x1205 RTC Dvr v0.9.3.3NPW NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) NET: Registered protocol family 1 Vendor: Maxtor 6 Model: Y080P0 Rev: 0811 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) sda: assuming drive cache: write through SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) sda: assuming drive cache: write through sda: sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 VFS: Mounted root (jffs2 filesystem). Freeing init memory: 80K INIT: version 2.86 booting OpenSlug booting... mount: Mounting /dev/mtdblock4 on /initrd failed: Invalid argument Starting syslogd/klogd: done Setting up IP spoofing protection: rp_filter. Configuring network interfaces... ixp400: module license 'unspecified' taints kernel. Module init. ixp425_eth: Initializing IXP425 NPE Ethernet driver software v. 1.1A ixp425_eth: CPU clock speed (approx) = 0 MHz [error] ixEthMiiPhyScan : unexpected Mii PHY ID 00008201 ixp425_eth: npe0 is using the PHY at address 0 ixp425_eth: npe1 is using the PHY at address 1 udhcpc (v0.9.9-pre) started NET: Registered protocol family 17 Sending discover... Sending discover... Sending select for 192.168.21.134... Lease of 192.168.21.134 obtained, lease time 43200 ixp425_eth: ixEthMiiLinkStatus failed on PHY0. Can't determine the auto negotiated parameters. Using default values. done. Starting portmap daemon: portmap. Nothing to be done INIT: Entering runlevel: 5 Starting Dropbear SSH server: dropbear. OpenSlug 2.5-beta dev-slug ttyS0