--- odoc 2005-09-01 15:51:44.000000000 +0000 +++ my 2005-09-01 15:51:47.000000000 +0000 @@ -1,24 +1,4 @@ -+Ethernet eth0: MAC address 00:c0:02:01:01:02 -IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1 -Default server: 0.0.0.0, DNS server IP: 0.0.0.0 - -RedBoot(tm) bootstrap and debug environment [ROMRAM] -Red Hat certified release, version 1.92 - built 15:16:07, Feb 3 2004 - -Platform: IXDP425 Development Platform (XScale) -Copyright (C) 2000, 2001, 2002, Red Hat, Inc. - -RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available -FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each. -== Executing boot script in 2.000 seconds - enter ^C to abort -RedBoot> boot;exec 0x01d00000 -have eRcOmM -copy kernel code from flash to RAM -copy ramdisk file from flash to RAM -run kernel -Using base address 0x01d00000 and length 0x000d1a80 -Uncompressing Linux.......................................................... done, booting the kernel. -Linux version 2.6.12.2 (openslug@openslug.org) (gcc version 3.4.4) #1 Mon Aug 8 08:52:36 PDT 2005 +Linux version 2.6.12.2 (openslug@openslug.org) (gcc version 3.4.4) #1 Mon Aug 15 23:19:04 CEST 2005 CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE) CPU0: D VIVT undefined 5 cache CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets @@ -26,13 +6,18 @@ Machine: Linksys NSLU2 Warning: bad configuration page, trying to continue Memory policy: ECC disabled, Data cache writeback +On node 0 totalpages: 8192 + DMA zone: 8192 pages, LIFO batch:3 + Normal zone: 0 pages, LIFO batch:1 + HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc reboot=s noirqdebug console=ttyS0,115200n8 PID hash table entries: 256 (order: 8, 4096 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 32MB = 32MB total -Memory: 30592KB available (1590K code, 151K data, 80K init) +Memory: 30512KB available (1600K code, 153K data, 80K init) +Calibrating delay loop... 263.78 BogoMIPS (lpj=1318912) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 @@ -46,6 +31,8 @@ usbcore: registered new driver usbfs usbcore: registered new driver hub OpenN2 Misc I/O Driver Version 0.1.7 +init_jiffy=-29975 +setup_interrupts - jiffies=-29975 init_jiffy=-29975 enable_irq(22) unbalanced from c0010cb0 enable_irq(29) unbalanced from c0010cb8 NetWinder Floating Point Emulator V0.97 (double precision) @@ -58,9 +45,11 @@ io scheduler deadline registered RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank +IXP4XX-Flash.0: Found an alias at 0x800000 for the chip at 0x0 Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled +0: offset=0x0,size=0x20000,blocks=64 Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000 6 RedBoot partitions found on MTD device IXP4XX-Flash.0 Creating 6 MTD partitions on "IXP4XX-Flash.0": @@ -78,6 +67,7 @@ ehci_hcd 0000:00:01.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected +ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: enabling device 0000:00:01.0 (0140 -> 0142) ohci_hcd 0000:00:01.0: OHCI Host Controller ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2 @@ -88,55 +78,95 @@ ohci_hcd 0000:00:01.1: OHCI Host Controller ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000 -usb 1-1: new high speed USB device using ehci_hcd and address 2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Initializing USB Mass Storage driver... -scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. i2c /dev entries driver LOADED Xicor x1205 RTC Dvr v0.9.3.3NPW +Xicor x1205 RTC Dvr v0.9.3.3NPW attached on adapter NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) NET: Registered protocol family 1 - Vendor: Maxtor 6 Model: Y080P0 Rev: 0811 - Type: Direct-Access ANSI SCSI revision: 00 -SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) -sda: assuming drive cache: write through -SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) -sda: assuming drive cache: write through - sda: sda1 sda2 sda3 -Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 +usb 3-1: new full speed USB device using ohci_hcd and address 2 VFS: Mounted root (jffs2 filesystem). Freeing init memory: 80K -INIT: version 2.86 booting -OpenSlug booting... -mount: Mounting /dev/mtdblock4 on /initrd failed: Invalid argument -Starting syslogd/klogd: done -Setting up IP spoofing protection: rp_filter. -Configuring network interfaces... ixp400: module license 'unspecified' taints kernel. +ixp400: module license 'unspecified' taints kernel. Module init. -ixp425_eth: -Initializing IXP425 NPE Ethernet driver software v. 1.1A +ixp425_eth: +Initializing IXP425 NPE Ethernet driver software v. 1.1A ixp425_eth: CPU clock speed (approx) = 0 MHz [error] ixEthMiiPhyScan : unexpected Mii PHY ID 00008201 ixp425_eth: npe0 is using the PHY at address 0 ixp425_eth: npe1 is using the PHY at address 1 -udhcpc (v0.9.9-pre) started NET: Registered protocol family 17 -Sending discover... -Sending discover... -Sending select for 192.168.21.134... -Lease of 192.168.21.134 obtained, lease time 43200 ixp425_eth: ixEthMiiLinkStatus failed on PHY0. - Can't determine + Can't determine the auto negotiated parameters. Using default values. -done.