+ Trying NPE-B...success. Using NPE-B with PHY 0. Ethernet eth0: MAC address 00:d0:12:02:79:17 IP: 192.168.1.70/255.255.255.0, Gateway: 0.0.0.0 Default server: 192.168.1.10 RedBoot(tm) bootstrap and debug environment [ROM] Gateworks certified release, version 2.02 - built 05:23:27, Mar 3 2006 Platform: Gateworks Avila GW234X (IXP42X 533MHz) BE Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Copyright (C) 2004, 2005 Gateworks Corporation RAM: 0x00000000-0x08000000, [0x000298b0-0x07fc1000] available FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each. == Executing boot script in 2.500 seconds - enter ^C to abort RedBoot> load -r -v -b 0x600000 /vmlinuz-loft-2.6.18 Using default protocol (TFTP) - Raw file loaded 0x00600000-0x00738483, assumed entry at 0x00600000 RedBoot> exec Using base address 0x00600000 and length 0x00138484 Uncompressing Linux..................................................................................... done, booting the . Linux version 2.6.18 (gs@gw-lap) (gcc version 3.4.4) #5 PREEMPT Mon Oct 23 19:52:36 EDT 2006 CPU: XScale-IXP42x Family [690541c1] revision 1 (ARMv5TE), cr=0000397f Machine: Giant Shoulder Inc Loft board Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT undefined 5 cache CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets Built 1 zonelists. Total pages: 32768 Kernel command line: noirqdebug console=ttyS0,115200n8 root=/dev/hda1 rtc-ds1672.probe=0,0x68 mem=128M@0x0 IRQ lockup detection disabled PID hash table entries: 1024 (order: 10, 4096 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 127116KB available (2160K code, 445K data, 92K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 IXP4xx: Using 16MiB expansion bus window size PCI: IXP4xx is host PCI: IXP4xx Using direct access for memory space PCI: bus0: Fast back to back transfers enabled SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 4096 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) squashfs: version 3.1 (2006/08/19) Phillip Lougher JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. Initializing Cryptographic API io scheduler noop registered io scheduler deadline registered (default) HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize IXP4XX Q Manager 0.2.0 initialized. IXP4XX NPE driver Version 0.2.0 initialized ...... MAC=0x000000000000 ixp4xx_mac driver 0.2.1: eth0 on NPE-B with PHY[0] initialized ...... MAC=0x000000000000 ixp4xx_mac driver 0.2.1: eth1 on NPE-C with PHY[1] initialized Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide: Gateworks Avila IDE/CF driver v1.3 hda: probing with STATUS(0x50) instead of ALTSTATUS(0x0a) hda: SanDisk SDCFH-512, CFA DISK drive hdb: probing with STATUS(0x50) instead of ALTSTATUS(0x0a) hdb: probing with STATUS(0x51) instead of ALTSTATUS(0x0a) ide0 at 0xc8860000-0xc8860007,0xc886001e on irq 29 hda: max request size: 128KiB hda: 1000944 sectors (512 MB) w/1KiB Cache, CHS=993/16/63 hda: hda1 IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000 4 RedBoot partitions found on MTD device IXP4XX-Flash.0 Creating 4 MTD partitions on "IXP4XX-Flash.0": 0x00000000-0x00080000 : "RedBoot" 0x001c0000-0x004e0000 : "ramdisk" 0x00fe0000-0x00fff000 : "FIS directory" mtd: partition "FIS directory" doesn't end on an erase block -- force read-only 0x00fff000-0x01000000 : "RedBoot config" mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force read-only USB Universal Host Controller Interface driver v3.0 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. i2c /dev entries driver : oscillator started; SET TIME! ds1672 0-0068: chip found, driver version 0.3 ds1672 0-0068: rtc intf: sysfs ds1672 0-0068: rtc intf: proc ds1672 0-0068: rtc intf: dev (254:0) ds1672 0-0068: rtc core: registered ds1672 as rtc0 ...... In loft_eeprom_do ...... MAC0=0x00d012027917 ...... MAC1=0x00d012127917 TCP bic registered NET: Registered protocol family 1 ds1672 0-0068: setting the system clock to 2006-10-23 23:49:20 (1161647360) VFS: Mounted root (ext2 filesystem). Freeing init memory: 92K INIT: version 2.86 booting Activating swap. Checking root file system... fsck 1.37 (21-Mar-2005) /dev/hda1: clean, 13190/125488 files, 256468/500432 blocks System time was Mon Oct 23 23:49:28 UTC 2006. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Mon Oct 23 23:49:30 UTC 2006. Cleaning up ifupdown...done. Calculating module dependencies... done. Loading modules... All modules loaded. Checking all file systems... fsck 1.37 (21-Mar-2005) Setting kernel variables ... net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.all.log_martians = 1 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.all.accept_redirects = 0 error: 'net.ipv4.tcp_syncookies' is an unknown key net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.ip_forward = 1 ... done. Mounting local filesystems... tmpfs on /tmp type tmpfs (rw,noatime) Cleaning /tmp /var/run /var/lock. Setting sensors limits: done. Running 0dns-down to make sure resolv.conf is ok...done. Setting up networking...done. Setting up IP spoofing protection: rp_filter. Configuring network interfaces...swapped image found Image loaded to NPE-B Func:1, Rel: 2:0, Status: 82400000 swapped image found Image loaded to NPE-C Func:1, Rel: 2:0, Status: 80800000 Internet Software Consortium DHCP Client 2.0pl5 Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. All rights reserved. Please contribute if you find this software useful. For info, please visit http://www.isc.org/dhcp-contrib.html