Linux version 2.6.8.1-hh0 (koen@lieve) (gcc version 3.3.4) #1 Fri Nov 19 19:11:01 CET 2004
CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE)
CPU: D undefined 5 cache
CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Machine: HP iPAQ H2200
Memory policy: ECC disabled, Data cache writethrough
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0, inactive)
--++> Serial cable detected <++--
Built 1 zonelists
Kernel command line: root=/dev/nfs nfsroot=192.168.0.200:/home/ipaq_rootfs ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0:ipaq:usb0 console=ttyS0,115200n8 cachepolicy=writethrough
PID hash table entries: 512 (order 9: 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62144KB available (2001K code, 546K data, 84K init)
Calibrating delay loop... 397.31 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Linux Kernel Card Services
  options:  [pm]
ipaq shamcop: using irq 104-130
shamcop adc: cannot find resource 2 in platform resources
NetWinder Floating Point Emulator V0.97 (double precision)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
MediaQ 1188 chip detected, base IRQ 130
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Using anticipatory io scheduler
NFTL driver: nftlcore.c $Revision: 1.96 $, nftlmount.c $Revision: 1.36 $
iPAQ flash: probing 32-bit flash bus, window=c49f5000 with CFI.
iPAQ flash: probing 32-bit flash bus, window=c49f5000 with JEDEC.
iPAQ flash: failed to find flash.
pxa2xx_udc: version 14-Dec-2003
usb0: Ethernet Gadget, version: St Patrick's Day 2004
usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk
usb0: MAC 1a:60:19:07:1a:f0
udc: USB reset
ts: UCB1x00 touchscreen protocol output
ts: Compaq touchscreen protocol output
i2c /dev entries driver
I2C: PXA algorithm module loaded.
Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC).
uda1380_init:
pxa_uda1380_init: init
cannot find mixer!
Audio support initialized
ALSA device list:
  #0: PXA + Philips UDA1380 driver
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
udc: USB reset
usb0: full speed config #1: Ethernet Gadget, using CDC Ethernet Subset
IP-Config: Complete:
      device=usb0, addr=192.168.0.202, mask=255.255.255.0, gw=192.168.0.200,
     host=ipaq, domain=, nis-domain=(none),
     bootserver=192.168.0.200, rootserver=192.168.0.200, rootpath=
Looking up port of RPC 100003/2 on 192.168.0.200
Looking up port of RPC 100005/1 on 192.168.0.200
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing init memory: 84K
INIT: version 2.85 booting
Segmentation fault
INIT: Entering runlevel: 2
/etc/rc2.d/S10dropbear: 29: cannot open /proc/mounts: No such file
Starting Dropbear SSH server: start-stop-daemon: nothing in /proc - not mounted?
Starting portmap daemon: portmapstart-stop-dae