U-Boot 1.1.4 (Aug 5 2006 - 16:26:43) U-Boot code: 01400000 -> 0142A460 BSS: -> 0145EF38 RAM Configuration: Bank #0: 01100000 64 MB Manuf. ID @ 0x00100000: 0x00000020 Device ID @ 0x00100001: 0x0000007e Flash: 16 MB In: serial Out: serial Err: serial Call misc_init_r.... Enable interrupts... Call board_late_init()..... DM320 Rev. B/C initial i2c interface error sending address no valid mac in msp430, use default Initializing Ethernet Found DM9000 ID:90000a46 at address 60000300 ! [eth_init]MAC:80:4c:ef:54:87:a: Neuros Technologies OSD Controller (c) 2005 Ingenient Technologies NTSC/PAL Video Controller (c) 2005 Ingenient Technologies LCD Controller (c) 2005 Configuring video encoder for NTSC Initialize CompactFlash... no insert the CF card ide_preinit failed ** Unable to use ide 0:1 for finding package ** mmc or sd card initial error Enter main loop..... Hit any key to stop autoboot: 0 Found DM9000 ID:90000a46 at address 60000300 ! DM9000 work in 16 bus width [eth_init]MAC:80:4c:ef:54:87:a: TFTP from server 192.168.0.101; our IP address is 192.168.0.103 Filename 'neuros-osd/uImage'. Load address: 0x2000000 Loading: ################################################################# ################################################################# ################################################################# ####################### done Bytes transferred = 1113500 (10fd9c hex) ## Booting image at 02000000 ... Image Name: Linux-2.6.15 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1113436 Bytes = 1.1 MB Load Address: 01108000 Entry Point: 01108000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux.......................................................................... done, booting the ker. Linux version 2.6.15 (root@Mattdebian) (gcc version 3.4.6) #1 PREEMPT Fri Oct 20 15:47:59 EDT 2006 CPU: ARM926EJ-Sid(wb) [41069263] revision 3 (ARMv5TEJ) Machine: IT DM320-20 Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists Kernel command line: console=ttyS0,115200n8 root=/dev/nfs rw nfsroot=192.168.0.101:/srv/neuros-osd-rootfs,udp,v3,rsM PID hash table entries: 64 (order: 6, 1024 bytes) Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) Memory: 14MB = 14MB total Memory: 11792KB available (1897K code, 375K data, 92K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 usbcore: registered new driver usbfs usbcore: registered new driver hub NetWinder Floating Point Emulator V0.97 (double precision) JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0) Ingenient Technologies LED Driver 1.0 Ingenient Technologies DM320 Timer Driver Ingenient Technologies TI SoC Serial Driver 1.0 ttyS0 at MMIO 0xe0030300 (irq = 12) is a IT SoC ttyS1 at MMIO 0xe0030380 (irq = 13) is a IT SoC RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) *************** DM9000: dm9k_init_module I/O: c105e300, VID: 90000a46 eth0: at 0xc105e300 IRQ 27 eth0: Ethernet addr: 80:4c:ef:54:87:0a Ingenient Technologies I2C Adapter Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx Ingenient onboard IDE/HDD configured as device 0 Ingenient onboard IDE/CFC configured as device 1 Neuros NOR flash device: 1000000 at 100000 Flash device virtual mapping at c1080000 Neuros OSD NOR Flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 Neuros OSD NOR Flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available Using Neuros partition definition Creating 6 MTD partitions on "Neuros OSD NOR Flash": 0x00000000-0x00040000 : "bootloader" 0x00040000-0x00060000 : "u-env" 0x00060000-0x001a0000 : "kernel" 0x001a0000-0x007c0000 : "cramfs" 0x007c0000-0x007e0000 : "ramfs" 0x007e0000-0x01000000 : "jffs2" usbmon: debugfs is not available NET: Registered protocol family 2 IP route cache hash table entries: 128 (order: -3, 512 bytes) TCP established hash table entries: 512 (order: -1, 2048 bytes) TCP bind hash table entries: 512 (order: -1, 2048 bytes) TCP: Hash tables configured (established 512 bind 512) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 IP-Config: Complete: device=eth0, addr=192.168.0.103, mask=255.255.255.0, gw=192.168.0.1, host=neuros, domain=, nis-domain=(none), bootserver=192.168.0.101, rootserver=192.168.0.101, rootpath= Looking up port of RPC 100003/3 on 192.168.0.101 Looking up port of RPC 100005/3 on 192.168.0.101 VFS: Mounted root (nfs filesystem). Freeing init memory: 92K Warning: unable to open an initial console.