+Ethernet eth0: MAC address 00:0f:66:7c:d8:b5
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1
Default server: 0.0.0.0, DNS server IP: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Red Hat certified release, version 1.92 - built 15:16:07, Feb  3 2004

Platform: IXDP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available
FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> boot;exec 0x01d00000
have eRcOmM
copy kernel code from flash to RAM
copy ramdisk file from flash to RAM
run kernel
Using base address 0x01d00000 and length 0x0000a258


APEX Boot Loader 1.4.5 -- Copyright (c) 2004,2005,2006 Marc Singer

APEX comes with ABSOLUTELY NO WARRANTY.  It is free software and you
are welcome to redistribute it under certain circumstances.
For details, refer to the file COPYING in the program source.

  apex => mem:0x00200000+0xa258   (41560 bytes)
  env  => nor:0x7fc000+15k        (empty)

Use the command 'help help' to get started.

# copy -s fis://kernel 0x00008000
1179616 bytes transferred
# copy -s fis://ramdisk 0x01000000
6553584 bytes transferred
# wait 10 Type ^C key to cancel autoboot.
Type ^C key to cancel autoboot.
# boot
ATAG_HEADER
ATAG_MEM: start 0x00000000  size 0x02000000
ATAG_CMDLINE: (55 bytes) 'console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug'
ATAG_INITRD2: start 0x01000000  size 0x00400000
ATAG_END
Booting kernel at 0x00008000...
Uncompressing Linux........................................................................... done, booting the kernel.
Linux version 2.6.18-1-ixp4xx (Debian 2.6.18-2) (waldi@debian.org) (gcc version
4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 Tue Oct 24 05:10:42 MDT 2006
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=0000397f
Machine: Linksys NSLU2
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists.  Total pages: 8192
Kernel command line: console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug
IRQ lockup detection disabled
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 25924KB available (1832K code, 475K data, 92K init)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs... it is
Freeing initrd memory: 4096K
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:01.1 on pci bus
dmabounce: registered device 0000:00:01.2 on pci bus
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000
6 RedBoot partitions found on MTD device IXP4XX-Flash.0
Creating 6 MTD partitions on "IXP4XX-Flash.0":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00060000 : "SysConf"
0x00060000-0x00080000 : "Loader"
0x00080000-0x001a0000 : "Kernel"
0x001a0000-0x007e0000 : "Ramdisk"
0x007e0000-0x007e1000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
x1205 0-006f: chip found, driver version 1.0.7
x1205 0-006f: rtc core: registered x1205 as rtc0
NET: Registered protocol family 26
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
x1205 0-006f: setting the system clock to 2006-10-25 03:01:15 (1161745275)
Freeing init memory: 92K
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: enabling device 0000:00:01.2 (0140 -> 0142)
ehci_hcd 0000:00:01.2: EHCI Host Controller
ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000
ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
PCI: enabling device 0000:00:01.0 (0140 -> 0142)
ohci_hcd 0000:00:01.0: OHCI Host Controller
ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: enabling device 0000:00:01.1 (0140 -> 0142)
ohci_hcd 0000:00:01.1: OHCI Host Controller
ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Loading Intel IXP400 ethernet driver
FATAL: Module ixp400_eth not found.
Failed to load Intel IXP400 ethernet driver
Done.
Begin: Waiting for root file system... ...
  Vendor: ST325082  Model: 4A                Rev: 0000
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
 sda: sda1 sda2 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
Done.
Begin: Running /scripts/local-premount ...
Done.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
INIT: version 2.86 booting
Setting hostname to 'venus'...done.
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...swapped image found
Image loaded to NPE-B Func:0, Rel: 2:1, Status: 80800000
IXP4XX NPE driver Version 0.2.0 initialized
IXP4XX Q Manager 0.2.0 initialized.
input: ixp4xx beeper as /class/input/input0
ixp4xx_mac driver 0.2.1: eth0 on NPE-B with PHY[1] initialized
done.
Activating swap:swapon on /dev/sda5
Adding 88316k swap on /dev/sda5.  Priority:-1 extents:1 across:88316k
.
Will now check root file system:fsck 1.39 (29-May-2006)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda1
/dev/sda1: clean, 33729/30523392 files, 1229169/61026910 blocks
.
EXT3 FS on sda1, internal journal
Setting the system clock..
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
System Clock set. Local time: Wed Oct 25 03:01:42 UTC 2006.
Cleaning up ifupdown....
Loading modules...
    loop
loop: loaded (max 8 devices)
    rtc-dev
x1205 0-006f: rtc intf: dev (254:0)
All modules loaded.
Setting the system clock again..
System Clock set. Local time: Wed Oct 25 03:01:44 UTC 2006.
Loading device-mapper supportdevice-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
.
Will now check all file systems.
fsck 1.39 (29-May-2006)
Checking all file systems.
Done checking file systems.
A log is being saved in /var/log/fsck/checkfs if that location is writable.
Setting kernel variables...done.
Will now mount local filesystems:.
Will now activate swapfile swap:done.
Cleaning /tmp...done.
Cleaning /var/run...done.
Cleaning /var/lock...done.
Setting up resolvconf...done.
Setting up networking....
Configuring network interfaces...Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Duplex mode eth0 =1
Listening on LPF/eth0/3a:95:5f:a4:d0:01
Sending on   LPF/eth0/3a:95:5f:a4:d0:01
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
ip length 576 disagrees with bytes received 580.
accepting packet with data after udp payload.
DHCPOFFER from 192.168.0.1
DHCPREQUEST on eth0 to 255.255.255.255 port 67
ip length 576 disagrees with bytes received 580.
accepting packet with data after udp payload.
DHCPACK from 192.168.0.1
bound to 192.168.0.9 -- renewal in 40500 seconds.
done.
Starting portmap daemon....
Setting sensors limits: done.
Initializing random number generator...done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting MTA: exim4.
Starting printer spooler: lpd.
Starting internet superserver: inetd.
Starting OpenBSD Secure Shell server: sshdNET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
.
Starting NTP server: ntpd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler....
Running local boot scripts (/etc/rc.local).

Debian GNU/Linux testing/unstable venus ttyS0

venus login: