## Lance's ooober conf...man i have no life


# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
#    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# 

    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
#    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/local/"
#    FontPath   "/usr/share/fonts/Speedo/"
#    FontPath   "/usr/share/fonts/TrueType/"
#    FontPath   "/usr/share/fonts/freefont/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option	"Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"	"xorg"
    Option "XkbModel"	"pc101"
    Option "XkbLayout"	"us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Protocol"    "Auto"
    Option "Device"      "/dev/input/mice"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"	"256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"	"9600"
#    Option "SampleRate"	"150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor 1280-1024"
	HorizSync    31.5 - 79.0
	VertRefresh  50.0 - 90.0
	Option	    "dpms"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor 1280-1024"
	HorizSync    31.5 - 79.0
	VertRefresh  50.0 - 90.0
	Option	    "dpms"
EndSection

Section "Monitor"
	Identifier   "Monitor2"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor 1280-1024"
	HorizSync    31.5 - 79.0
	VertRefresh  50.0 - 90.0
	Option	    "dpms"
EndSection

Section "Monitor"
	Identifier   "gamingmon"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor 1280-1024"
	HorizSync    31.5 - 79.0
	VertRefresh  50.0 - 90.0
	Option	    "dpms"
EndSection

Section "Monitor"
	Identifier   "TV0"
	VendorName   "TV Vendor"
	ModelName    "TV Generic"
	HorizSync    30.0 - 50.0
	VertRefresh  60.0 - 60.0
EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
	Identifier  "Card1-TS"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV11 [GeForce2 MX/MX 400]"
	Option	    "NoLogo" "true"
	Option	    "RenderAccel" "true"
	BusID       "PCI:2:06:0"
EndSection

Section "Device"
	Identifier  "Card0-TS"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV36 [GeForce FX 5700LE]"
	Option	    "NoLogo" "true"
	Option	    "RenderAccel" "true"
	BusID       "PCI:1:0:0"
	Screen      1
EndSection

Section "Device"
	Identifier  "Card0-1-TS"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV36 [GeForce FX 5700LE]"
	Option	    "NoLogo" "true"
	Option	    "RenderAccel" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "Card0-DS"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV36 [GeForce FX 5700LE]"
	Option	    "NoLogo" "true"
	Option	    "RenderAccel" "true"
	BusID       "PCI:1:0:0"
	Screen      1
EndSection

Section "Device"
	Identifier  "Card0-1-DS"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV36 [GeForce FX 5700LE]"
	Option	    "NoLogo" "true"
	Option	    "RenderAccel" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "Card0-SS-1024-768"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV36 [GeForce FX 5700LE]"
	Option	    "NoLogo" "true"
	Option	    "RenderAccel" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "Card0-SS-1280-1024"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV36 [GeForce FX 5700LE]"
	Option	    "NoLogo" "true"
	Option	    "RenderAccel" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "Card0-SS-1600-1200"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV36 [GeForce FX 5700LE]"
	Option	    "NoLogo" "true"
	Option	    "RenderAccel" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "Card0-TV-800-600"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV36 [GeForce FX 5700LE]"
	Option	    "RenderAccel" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "Card0-TV-1024-768"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV36 [GeForce FX 5700LE]"
	Option	    "RenderAccel" "true"
	BusID       "PCI:1:0:0"
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
	Identifier "Screen0-TS"
	Device     "Card0-TS"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1280x1024"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1-TS"
	Device     "Card1-TS"
	Monitor    "Monitor1"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1280x1024"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen2-TS"
	Device     "Card0-1-TS"
	Monitor    "Monitor2"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1280x1024"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen0-DS"
	Device     "Card0-DS"
	Monitor    "Monitor1"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1280x1024"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1-DS"
	Device     "Card0-1-DS"
	Monitor    "Monitor2"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1280x1024" "1280x1024"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen0-SS-1024-768"
	Device     "Card0-SS-1024-768"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1024x768" "1024x768"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen0-SS-1280-1024"
	Device     "Card0-SS-1280-1024"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1280-1024" "1280-1024"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen0-SS-1600-1200"
	Device     "Card0-SS-1600-1200"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1600-1200" "1600-1200"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen0-TV-800-600"
	Device     "Card0-TV-800-600"
	Monitor    "TV0"
	DefaultDepth     24
	Option	    "NoLogo" "true"
	Option	    "TwinView" "true"
	Option	    "TVOutFormat" "COMPOSITE"
	Option	    "TwinViewOrientation" "CLONE"
	Option	    "MetaModes" "800x600,800x600"
	Option	    "TVStandard" "NTSC-M"
	Option	    "ConnectedMonitor" "CRT, TV"
	Option	    "SecondMonitorHorizSync" "30-50"
	Option	    "SecondMonitorVertRefresh" "60"
	Option	    "TVOverScan" "1.0"
	SubSection "Display"
		Depth     24
		Modes    "800-600" "800-600"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen0-TV-1024-768"
	Device     "Card0-TV-1024-768"
	Monitor    "TV0"
	DefaultDepth     24
	Option	    "NoLogo" "true"
	Option	    "TwinView" "true"
	Option	    "TVOutFormat" "COMPOSITE"
	Option	    "TwinViewOrientation" "CLONE"
	Option	    "MetaModes" "1024-768,1024-768"
	Option	    "TVStandard" "NTSC-M"
	Option	    "ConnectedMonitor" "CRT, TV"
	Option	    "SecondMonitorHorizSync" "30-50"
	Option	    "SecondMonitorVertRefresh" "60"
	Option	    "TVOverScan" "1.0"
	SubSection "Display"
		Depth     24
		Modes    "1024-768" "1024-768"
	EndSubSection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Screen0-TS" 0 0
	Screen      1  "Screen1-TS" LeftOf "Screen0-TS"
	Screen      2  "Screen2-TS" RightOf "Screen0-TS"
	InputDevice    "Mouse1" "CorePointer"
	InputDevice    "Keyboard1" "CoreKeyboard"
	Option	    "Xinerama"
EndSection

Section "ServerLayout"
	Identifier     "DS-1280-1024"
	Screen      0  "Screen0-DS" 0 0
	Screen      1  "Screen1-DS" RightOf "Screen0-DS"
	InputDevice    "Mouse1" "CorePointer"
	InputDevice    "Keyboard1" "CoreKeyboard"
	Option	    "Xinerama"
EndSection

Section "ServerLayout"
	Identifier     "SS-1024-768"
	Screen      0  "Screen0-SS-1024-768" 0 0
	InputDevice    "Mouse1" "CorePointer"
	InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "ServerLayout"
	Identifier     "SS-1280-1024"
	Screen      0  "Screen0-SS-1280-1024" 0 0
	InputDevice    "Mouse1" "CorePointer"
	InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "ServerLayout"
	Identifier     "SS-1600-1200"
	Screen      0  "Screen0-SS-1600-1200" 0 0
	InputDevice    "Mouse1" "CorePointer"
	InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "ServerLayout"
	Identifier     "TV-800-600"
	Screen      0  "Screen0-TV-800-600" 0 0
	InputDevice    "Mouse1" "CorePointer"
	InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "ServerLayout"
	Identifier     "TV-1024-768"
	Screen      0  "Screen0-TV-1024-768" 0 0
	InputDevice    "Mouse1" "CorePointer"
	InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

# Section "DRI"
#    Mode 0666
# EndSection