[ 0.000000] Bootdata ok (command line is root=/dev/sda1 ro quiet splash) [ 0.000000] Linux version 2.6.18 (root@morpheus) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 Thu Oct 5 22:47:57 EEST 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001def0000 (usable) [ 0.000000] BIOS-e820: 000000001def0000 - 000000001def3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001def3000 - 000000001df00000 (ACPI data) [ 0.000000] BIOS-e820: 000000001e000000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f74e0 [ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001def3040 [ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001def30c0 [ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001defb240 [ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001defb180 [ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] On node 0 totalpages: 119667 [ 0.000000] DMA zone: 2775 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 116892 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:15 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000) [ 0.000000] Built 1 zonelists. Total pages: 119667 [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 0.000000] time.c: Detected 1603.375 MHz processor. [ 17.154926] Console: colour VGA+ 80x25 [ 17.155318] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 17.155928] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 17.155996] Checking aperture... [ 17.156000] CPU 0: aperture @ 1042000000 size 32 MB [ 17.156003] Aperture too small (32 MB) [ 17.163013] No AGP bridge found [ 17.168864] Memory: 471360k/490432k available (2844k kernel code, 18260k reserved, 1087k data, 188k init) [ 17.245854] Calibrating delay using timer specific routine.. 3209.79 BogoMIPS (lpj=6419581) [ 17.245889] Security Framework v1.0.0 initialized [ 17.245897] SELinux: Disabled at boot. [ 17.245909] Mount-cache hash table entries: 256 [ 17.246017] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 17.246020] CPU: L2 Cache: 256K (64 bytes/line) [ 17.246038] CPU: AMD Sempron(tm) Processor 3000+ stepping 02 [ 17.246049] ACPI: Core revision 20060707 [ 17.295018] Using local APIC timer interrupts. [ 17.357327] result 12526383 [ 17.357329] Detected 12.526 MHz APIC timer. [ 17.357750] testing NMI watchdog ... OK. [ 17.397841] checking if image is initramfs... it is [ 17.973109] Freeing initrd memory: 6056k freed [ 17.977959] NET: Registered protocol family 16 [ 17.978040] ACPI: bus type pci registered [ 17.981713] PCI: Using MMCONFIG at f0000000 [ 17.981744] PCI: No mmconfig possible on device 0:18 [ 17.991462] ACPI: Interpreter enabled [ 17.991467] ACPI: Using IOAPIC for interrupt routing [ 17.992197] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.992201] PCI: Probing PCI hardware (bus 00) [ 18.000589] Boot video device is 0000:00:05.0 [ 18.001444] PCI: Transparent bridge - 0000:00:10.0 [ 18.001475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.181431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 18.184007] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15) [ 18.184461] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.184912] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.185376] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15) [ 18.185825] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.186272] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.186720] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) [ 18.187171] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.187620] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 18.188067] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.188519] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) [ 18.188979] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.189432] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 18.189881] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.190333] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.190783] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 18.191231] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 18.191679] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 18.192129] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) [ 18.192578] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 18.193137] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 18.193681] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 18.194219] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 18.194754] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 18.195290] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 18.195826] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 18.196363] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 18.196899] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 18.197489] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 18.198027] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 18.198563] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 18.199099] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 18.199639] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 18.200176] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. [ 18.200713] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 18.201307] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 18.201847] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 18.202383] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 18.202921] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 18.203458] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 18.203995] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 18.209697] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.209713] pnp: PnP ACPI init [ 18.221396] pnp: PnP ACPI: found 17 devices [ 18.221493] PCI: Using ACPI for IRQ routing [ 18.221499] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.221619] PCI-DMA: Disabling IOMMU. [ 18.222269] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved [ 18.222273] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved [ 18.222276] pnp: 00:01: ioport range 0x4400-0x447f has been reserved [ 18.222280] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved [ 18.222283] pnp: 00:01: ioport range 0x4800-0x487f has been reserved [ 18.222286] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved [ 18.222290] pnp: 00:01: ioport range 0x2000-0x207f has been reserved [ 18.222293] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved [ 18.222530] PCI: Bridge: 0000:00:02.0 [ 18.222532] IO window: d000-dfff [ 18.222536] MEM window: fd800000-fd8fffff [ 18.222539] PREFETCH window: fd700000-fd7fffff [ 18.222542] PCI: Bridge: 0000:00:03.0 [ 18.222544] IO window: b000-bfff [ 18.222547] MEM window: fde00000-fdefffff [ 18.222550] PREFETCH window: fdd00000-fddfffff [ 18.222553] PCI: Bridge: 0000:00:04.0 [ 18.222555] IO window: e000-efff [ 18.222558] MEM window: fdc00000-fdcfffff [ 18.222561] PREFETCH window: fd900000-fd9fffff [ 18.222565] PCI: Bridge: 0000:00:10.0 [ 18.222567] IO window: c000-cfff [ 18.222571] MEM window: fdb00000-fdbfffff [ 18.222575] PREFETCH window: fda00000-fdafffff [ 18.222585] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 18.222591] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 18.222596] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 18.222603] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 18.222625] NET: Registered protocol family 2 [ 18.256901] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 18.257001] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 18.257093] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 18.257141] TCP: Hash tables configured (established 16384 bind 8192) [ 18.257144] TCP reno registered [ 18.258443] audit: initializing netlink socket (disabled) [ 18.258459] audit(1161857132.052:1): initialized [ 18.258575] VFS: Disk quotas dquot_6.5.1 [ 18.258594] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 18.258633] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 18.258722] SGI XFS Quota Management subsystem [ 18.258750] Initializing Cryptographic API [ 18.258754] io scheduler noop registered [ 18.258759] io scheduler anticipatory registered [ 18.258764] io scheduler deadline registered (default) [ 18.258776] io scheduler cfq registered [ 18.273178] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 18.273183] pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS [ 18.273197] assign_interrupt_mode Found MSI capability [ 18.273229] Allocate Port Service[0000:00:02.0:pcie00] [ 18.273263] Allocate Port Service[0000:00:02.0:pcie03] [ 18.273295] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 18.273299] pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS [ 18.273313] assign_interrupt_mode Found MSI capability [ 18.273326] Allocate Port Service[0000:00:03.0:pcie00] [ 18.273355] Allocate Port Service[0000:00:03.0:pcie03] [ 18.273384] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 18.273387] pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS [ 18.273401] assign_interrupt_mode Found MSI capability [ 18.273415] Allocate Port Service[0000:00:04.0:pcie00] [ 18.273440] Allocate Port Service[0000:00:04.0:pcie03] [ 18.302424] Real Time Clock Driver v1.12ac [ 18.302467] Linux agpgart interface v0.101 (c) Dave Jones [ 18.302470] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.302594] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.302866] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 18.303577] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.303941] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 18.304665] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.304870] Linux video capture interface: v2.00 [ 18.304914] saa7130/34: v4l2 driver version 0.2.14 loaded [ 18.305003] saa7146: register extension 'budget dvb'. [ 18.305028] saa7146: register extension 'budget_ci dvb'. [ 18.305661] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 18.305668] GSI 16 sharing vector 0xC9 and IRQ 16 [ 18.305676] ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 201 [ 18.305708] saa7146: found saa7146 @ mem ffffc2000000e000 (revision 1, irq 201) (0x13c2,0x1010). [ 18.305716] saa7146 (0): dma buffer size 192512 [ 18.305719] DVB: registering new adapter (TT-Budget-C-CI PCI). [ 18.341688] adapter has MAC addr = 00:d0:5c:04:78:cd [ 18.341943] input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input0 [ 18.342008] budget_ci: CI interface initialised [ 18.342206] DVB: registering frontend 0 (ST STV0297 DVB-C)... [ 18.342250] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 18.342254] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 18.342447] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 18.342629] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 18.342642] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.342758] mice: PS/2 mouse device common for all mice [ 18.342786] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). [ 18.342874] ALSA device list: [ 18.342876] No soundcards found. [ 18.342950] TCP bic registered [ 18.342956] NET: Registered protocol family 1 [ 18.342965] NET: Registered protocol family 8 [ 18.342967] NET: Registered protocol family 20 [ 18.343051] ACPI: (supports S0 S1 S3 S4 S5) [ 18.343137] Freeing unused kernel memory: 188k freed [ 18.362062] input: AT Translated Set 2 keyboard as /class/input/input1 [ 18.385368] vga16fb: initializing [ 18.385373] vga16fb: mapped to 0xffff8100000a0000 [ 18.385418] fb0: VGA16 VGA frame buffer device [ 19.611055] ACPI: Fan [FAN] (on) [ 19.614063] ACPI: Getting cpuindex for acpiid 0x1 [ 19.615727] ACPI: Thermal Zone [THRM] (40 C) [ 19.892845] Probing IDE interface ide0... [ 20.329747] SCSI subsystem initialized [ 20.334281] libata version 2.00 loaded. [ 20.335728] sata_nv 0000:00:0e.0: version 2.0 [ 20.336336] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 20.336342] GSI 17 sharing vector 0xD1 and IRQ 17 [ 20.336350] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 209 [ 20.336422] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 20.336490] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF800 irq 209 [ 20.336513] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF808 irq 209 [ 20.336530] scsi0 : sata_nv [ 20.381606] usbcore: registered new driver usbfs [ 20.381630] usbcore: registered new driver hub [ 20.382378] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 20.437761] ieee1394: Initialized config rom entry `ip1394' [ 20.448386] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. [ 20.458714] Probing IDE interface ide1... [ 20.802369] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 20.802942] ata1.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 0/1) [ 20.802946] ata1.00: ata1: dev 0 multi count 1 [ 20.803586] ata1.00: configured for UDMA/133 [ 20.803597] scsi1 : sata_nv [ 21.114044] ata2: SATA link down (SStatus 0 SControl 300) [ 21.124561] ATA: abnormal status 0x7F on port 0x977 [ 21.124667] Vendor: ATA Model: WDC WD1200BEVS-0 Rev: 01.0 [ 21.124675] Type: Direct-Access ANSI SCSI revision: 05 [ 21.125525] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 21.125532] GSI 18 sharing vector 0xD9 and IRQ 18 [ 21.125539] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 217 [ 21.125616] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 21.125675] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xF300 irq 217 [ 21.125699] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xF308 irq 217 [ 21.125716] scsi2 : sata_nv [ 21.433727] ata3: SATA link down (SStatus 0 SControl 300) [ 21.444240] ATA: abnormal status 0x7F on port 0x9E7 [ 21.444254] scsi3 : sata_nv [ 21.753411] ata4: SATA link down (SStatus 0 SControl 300) [ 21.763924] ATA: abnormal status 0x7F on port 0x967 [ 21.766050] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [ 21.766075] NFORCE-MCP51: chipset revision 161 [ 21.766077] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 21.766084] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller [ 21.766095] ide0: BM-DMA at 0xfd00-0xfd07, BIOS settings: hda:DMA, hdb:DMA [ 21.766106] ide1: BM-DMA at 0xfd08-0xfd0f, BIOS settings: hdc:DMA, hdd:DMA [ 21.766114] Probing IDE interface ide0... [ 22.336839] Probing IDE interface ide1... [ 22.905244] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 22.905252] GSI 19 sharing vector 0xE1 and IRQ 19 [ 22.905259] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 225 [ 22.905329] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 22.905335] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 22.905938] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 22.905963] ohci_hcd 0000:00:0b.0: irq 225, io mem 0xfe02f000 [ 22.962494] usb usb1: configuration #1 chosen from 1 choice [ 22.962587] hub 1-0:1.0: USB hub found [ 22.962597] hub 1-0:1.0: 8 ports detected [ 23.065035] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 23.065043] GSI 20 sharing vector 0xE9 and IRQ 20 [ 23.065051] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 233 [ 23.065122] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 23.065128] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 23.065320] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 23.065354] ehci_hcd 0000:00:0b.1: debug port 1 [ 23.065358] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 23.065372] ehci_hcd 0000:00:0b.1: irq 233, io mem 0xfe02e000 [ 23.065380] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.065609] usb usb2: configuration #1 chosen from 1 choice [ 23.065707] hub 2-0:1.0: USB hub found [ 23.065715] hub 2-0:1.0: 8 ports detected [ 23.168842] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 23.168850] GSI 21 sharing vector 0x32 and IRQ 21 [ 23.168857] ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 50 [ 23.219061] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50] MMIO=[fdbff000-fdbff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 23.219785] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 23.219789] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 209 [ 23.219796] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 23.219806] forcedeth: using HIGHDMA [ 23.739820] eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0 [ 23.750551] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) [ 23.750563] sda: Write Protect is off [ 23.750565] sda: Mode Sense: 00 3a 00 00 [ 23.750577] SCSI device sda: drive cache: write back [ 23.750636] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) [ 23.750644] sda: Write Protect is off [ 23.750646] sda: Mode Sense: 00 3a 00 00 [ 23.750657] SCSI device sda: drive cache: write back [ 23.750661] sda: sda1 sda2 sda3 < sda5 > [ 23.823217] sd 0:0:0:0: Attached scsi disk sda [ 24.165200] Attempting manual resume [ 24.188824] kjournald starting. Commit interval 5 seconds [ 24.188836] EXT3-fs: mounted filesystem with ordered data mode. [ 24.486901] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000c1e981] [ 29.455945] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 29.565817] parport: PnPBIOS parport detected. [ 29.565849] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 29.661954] lp0: using parport0 (interrupt-driven). [ 29.835199] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 29.835204] ieee1394: sbp2: Try serialize_io=0 for better performance [ 29.882730] logips2pp: Detected unknown logitech mouse model 127 [ 30.103241] Adding 1461904k swap on /dev/sda2. Priority:-1 extents:1 across:1461904k [ 30.343783] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2 [ 30.408784] EXT3 FS on sda1, internal journal [ 31.147862] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 31.147867] md: bitmap version 4.39 [ 31.149618] NET: Registered protocol family 17 [ 32.620586] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com [ 33.404407] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 33.407377] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 33.435634] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c00 [ 33.435656] i2c_adapter i2c-2: nForce2 SMBus adapter at 0x4c40 [ 34.146099] input: PC Speaker as /class/input/input3 [ 34.304812] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 34.304817] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 217 [ 34.304892] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 34.642664] Floppy drive(s): fd0 is 1.44M [ 34.660301] FDC 0 is a post-1991 82077 [ 34.983406] ts: Compaq touchscreen protocol output [ 38.662137] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 38.662143] device-mapper: ioctl: error adding target to table [ 38.664187] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 38.664192] device-mapper: ioctl: error adding target to table [ 38.665809] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 38.665815] device-mapper: ioctl: error adding target to table [ 38.666428] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 38.666433] device-mapper: ioctl: error adding target to table [ 38.666936] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 38.666940] device-mapper: ioctl: error adding target to table [ 38.667408] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 38.667412] device-mapper: ioctl: error adding target to table [ 38.667910] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 38.667915] device-mapper: ioctl: error adding target to table [ 38.668359] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 38.668363] device-mapper: ioctl: error adding target to table [ 38.668888] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 38.668893] device-mapper: ioctl: error adding target to table [ 38.669363] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 38.669367] device-mapper: ioctl: error adding target to table [ 38.669836] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 38.669841] device-mapper: ioctl: error adding target to table [ 38.670331] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed [ 38.670335] device-mapper: ioctl: error adding target to table [ 38.948564] XFS mounting filesystem sda5 [ 39.151464] Ending clean XFS mount for filesystem: sda5 [ 41.567980] ACPI: Power Button (FF) [PWRF] [ 41.567993] ACPI: Power Button (CM) [PWRB] [ 41.591266] Using specific hotkey driver [ 41.638103] ibm_acpi: ec object not found [ 41.684107] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 42.015251] powernow-k8: Power state transitions not supported [ 43.180464] ppdev: user-space parallel port driver [ 43.388944] NET: Registered protocol family 10 [ 43.389030] lo: Disabled Privacy Extensions [ 43.389378] IPv6 over IPv4 tunneling driver [ 50.968853] Bluetooth: Core ver 2.10 [ 50.968913] NET: Registered protocol family 31 [ 50.968915] Bluetooth: HCI device and connection manager initialized [ 50.968919] Bluetooth: HCI socket layer initialized [ 51.001588] Bluetooth: L2CAP ver 2.8 [ 51.001592] Bluetooth: L2CAP socket layer initialized [ 51.004752] Bluetooth: RFCOMM socket layer initialized [ 51.004772] Bluetooth: RFCOMM TTY layer initialized [ 51.004774] Bluetooth: RFCOMM ver 1.8 [ 54.229358] eth0: no IPv6 routers present [ 778.552082] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff) [ 2105.840333] dvb_ca adapter 0: DVB CAM detected and initialised successfully [ 8293.769634] dvb_ca adapter 0: DVB CAM detected and initialised successfully [ 8338.677379] dvb_ca adapter 0: DVB CAM detected and initialised successfully [ 9439.349118] dvb_ca adapter 0: CAM tried to send a buffer larger than the link buffer size (65535 > 16)! [ 9439.580624] dvb_ca adapter 0: CAM tried to send a buffer larger than the ecount size! [ 9439.580631] dvb_ca adapter 0: DVB CAM link initialisation failed :( [ 9449.582304] dvb_ca adaptor 0: PC card did not respond :( [ 9463.376332] dvb_ca adaptor 0: PC card did not respond :( [ 9527.377963] dvb_ca adapter 0: DVB CAM detected and initialised successfully [ 9882.957576] dvb_ca adapter 0: DVB CAM detected and initialised successfully