=== START OF INFORMATION SECTION === Model Family: Western Digital Caviar family Device Model: WDC WD800BB-00JHC0 Serial Number: WD-WMAM9J528796 Firmware Version: 05.01C05 User Capacity: 80.026.361.856 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sat Oct 28 12:51:24 2006 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (2460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 35) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 3 3 Spin_Up_Time 0x0003 169 162 021 Pre-fail Always - 2550 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 504 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 6124 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 499 194 Temperature_Celsius 0x0022 115 098 000 Old_age Always - 28 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 3 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 occurred at disk power-on lifetime: 734 hours (30 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 80 02 26 e5 e7 Error: WP at LBA = 0x07e52602 = 132457986 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c5 d1 08 bf 14 e7 01 58 10:51:53.425 WRITE MULTIPLE c4 d1 80 ff 25 e5 07 58 10:51:51.510 READ MULTIPLE c5 d1 80 cf b9 f8 05 58 10:51:51.485 WRITE MULTIPLE c4 d1 80 e7 fa 37 06 58 10:51:51.450 READ MULTIPLE c5 d1 80 4f b9 f8 05 58 10:51:51.420 WRITE MULTIPLE Error 2 occurred at disk power-on lifetime: 733 hours (30 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 80 02 26 e5 e7 Error: WP at LBA = 0x07e52602 = 132457986 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c5 d1 80 4f 34 5f 00 58 09:38:41.295 WRITE MULTIPLE c4 d1 80 ff 25 e5 07 58 09:38:39.080 READ MULTIPLE c5 d1 80 e7 fa 37 06 58 09:38:39.055 WRITE MULTIPLE c4 d1 80 9f 0e 31 09 58 09:38:39.020 READ MULTIPLE c5 d1 80 67 fa 37 06 58 09:38:38.995 WRITE MULTIPLE Error 1 occurred at disk power-on lifetime: 732 hours (30 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 80 02 26 e5 e7 Error: WP at LBA = 0x07e52602 = 132457986 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c5 d1 08 e7 3c 24 00 58 08:57:31.210 WRITE MULTIPLE c4 d1 80 ff 25 e5 07 58 08:57:29.295 READ MULTIPLE c5 d1 80 9f 0e 31 09 58 08:57:29.265 WRITE MULTIPLE c4 d1 80 7f 25 e5 07 58 08:57:29.225 READ MULTIPLE c5 d1 80 1f 0e 31 09 58 08:57:29.195 WRITE MULTIPLE SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 5309 - # 2 Extended offline Completed without error 00% 4277 - # 3 Extended offline Aborted by host 90% 4276 - # 4 Extended offline Aborted by host 90% 4276 - # 5 Extended offline Aborted by host 90% 4276 - # 6 Extended offline Completed without error 00% 4276 - # 7 Extended offline Completed without error 00% 4276 - # 8 Extended offline Aborted by host 90% 4275 - # 9 Extended offline Aborted by host 10% 4275 - #10 Short offline Completed without error 00% 4275 - #11 Extended offline Completed without error 00% 3742 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.