ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3f) loading
ivtv: Linux version: 2.4.27.050208+5
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x0661 vendor: 0x1039
i2c-core.o: adapter ivtv i2c driver #0 registered as adapter 0.
i2c-core.o: driver tveeprom registered.
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 2912186
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[0],ok]
i2c-core.o: client [tveeprom[0]] registered to adapter [ivtv i2c driver #0](pos. 0).
ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: SECAM tuner detected
ivtv: Radio detected
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
ivtv: i2c attach [client=(tuner unset),ok]
i2c-core.o: client [(tuner unset)] registered to adapter [ivtv i2c driver #0](pos. 1).
i2c-core.o: driver saa7115 registered.
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
i2c-core.o: client [saa7115[0]] registered to adapter [ivtv i2c driver #0](pos. 2).
saa7115: status: (1E) 0x40, (1F) 0xc0
saa7127: video encoder driver version V 0.3 loaded
i2c-core.o: driver saa7127 registered.
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
i2c-core.o: client [saa7127[0]] registered to adapter [ivtv i2c driver #0](pos. 3).
i2c-core.o: driver i2c msp3400 driver registered.
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Feb 14 2005 08:34:59
ivtv: i2c attach [client=MSP3418W-B3,ok]
i2c-core.o: client [MSP3418W-B3] registered to adapter [ivtv i2c driver #0](pos. 4).
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware is buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers  262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Setting Tuner 38
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: ivtv_enc_thread: pid = 1433, itv = 0xce9898e0
ivtv: ivtv_dec_thread: pid = 1434, itv = 0xce9898e0
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ====================  END INIT IVTV  ====================