CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Fri Jun 25 15:49:22 CST 2004 (root@Amin) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena. Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) CPU type 0x29007: 200MHz Total memory: 0x2000000 bytes (32MB) Total memory used by CFE: 0x80300000 - 0x8043DF30 (1302320) Initialized Data: 0x803381A0 - 0x8033A550 (9136) BSS Area: 0x8033A550 - 0x8033BF30 (6624) Local Heap: 0x8033BF30 - 0x8043BF30 (1048576) Stack Area: 0x8043BF30 - 0x8043DF30 (8192) Text (code) segment: 0x80300000 - 0x803381A0 (229792) Boot area (physical): 0x0043E000 - 0x0047E000 Relocation Factor: I:00000000 - D:00000000 Boot version: v3.2 The boot is CFE mac_init(): Find mac [00:0F:66:C7:7C:C4] in location 1 Nothing... No eou key find Device eth0: hwaddr 00-0F-66-C7-7C-C4, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ...... 1650688 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 CPU revision is: 00029007 Primary instruction cache 8kb, linesize 16 bytes (2 ways) Primary data cache 4kb, linesize 16 bytes (2 ways) Linux version 2.4.20 (root@mighty) (gcc version 3.3.3) #1 Sat Aug 14 14:44:52 CEST 2004 Determined physical RAM map: memory: 02000000 @ 00000000 (usable) On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 CPU: BCM4712 rev 1 at 200 MHz Calibrating delay loop... 199.47 BogoMIPS Memory: 30380k/32768k available (1422k kernel code, 2388k reserved, 100k data, 68k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Disabled PCI: Fixing up bus 0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 0) is a 16550A Software Watchdog Timer: 0.05, timer margin: 60 sec loop: loaded (max 8 devices) PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Flash device: 0x800000 at 0x1c000000 Physically mapped flash: squashfs filesystem found at block 919 Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "pmon" 0x00040000-0x007e0000 : "linux" 0x000e5f80-0x001ba12d : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only 0x007e0000-0x00800000 : "nvram" 0x001c0000-0x007e0000 : "OpenWrt" sflash: found no supported devices NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) ip_conntrack version 2.1 (256 buckets, 2048 max) - 352 bytes per conntrack ip_conntrack_pptp version 1.9 loaded ip_nat_pptp version 1.5 loaded ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Bridge firewalling registered 802.1Q VLAN Support v1.7 Ben Greear All bugs added by David S. Miller VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 68k freed Algorithmics/MIPS FPU Emulator v1.5 Using /lib/modules/2.4.20/diag.o diag board_type: 00000101 using v2 hardware led -> 00 led -> 01 Unlocking mtd4 umount: /rom/dev: Device or resource busy init started: BusyBox v1.00-rc2 (2004.08.14-12:53+0000) multi-call binary kernel.panic = 3 net.ipv4.ip_forward = 1 net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.icmp_ignore_bogus_error_responses = 1 net.ipv4.tcp_fin_timeout = 30 net.ipv4.tcp_keepalive_time = 120 net.ipv4.tcp_timestamps = 0 jffs2.bbc: SIZE compression mode activated. Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10 Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o eth1: Broadcom BCM43XX 802.11 Wireless Controller 3.50.21.10 (Compiled in . at 20:53:00 on Jan 21 2004) device eth0 entered promiscuous mode vlan0: add 01:00:5e:00:00:01 mcast address to master interface SIOCGIFFLAGS: No such device bridge br0 doesn't exist; can't delete it Using /lib/modules/2.4.20/adm.o ADM: 00071010 OpenWRT ADM Config: port0 ENABLED 100Mbps FD FLOW UNTAG VLAN NOPRIO DOWN 10Mbps HD FLOW PRIO:0 PVID:0 vlan0 RX packets:0 TX packets:0 collisions:0 errors:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) OpenWRT ADM Config: port1 ENABLED 100Mbps FD FLOW UNTAG VLAN NOPRIO DOWN 10Mbps HD FLOW PRIO:0 PVID:1 vlan1 RX packets:0 TX packets:0 collisions:0 errors:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) OpenWRT ADM Config: port2 ENABLED 100Mbps FD FLOW UNTAG VLAN NOPRIO DOWN 10Mbps HD FLOW PRIO:0 PVID:2 vlan2 RX packets:0 TX packets:0 collisions:0 errors:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) OpenWRT ADM Config: port3 ENABLED 100Mbps FD FLOW UNTAG VLAN NOPRIO DOWN 10Mbps HD FLOW PRIO:0 PVID:2 vlan2 RX packets:0 TX packets:0 collisions:0 errors:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) OpenWRT ADM Config: afterburner 1 port4 ENABLED 100Mbps FD FLOW UNTAG VLAN NOPRIO DOWN 10Mbps HD FLOW PRIO:0 PVID:2 vlan2 RX packets:0 TX packets:0 collisions:0 errors:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) register_vlan_device: ALREADY had VLAN registered vconfig: socket or ioctl error for add: Invalid argument vlan1: add 01:00:5e:00:00:01 mcast address to master interface vlan2: add 01:00:5e:00:00:01 mcast address to master interface [235] Jan 01 00:00:20 Running in background led -> 00 BusyBox v1.00-rc2 (2004.08.14-12:53+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M root@wlanbridge:/# afterburner 0 root@wlanbridge:/#