ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.8 (tagged release) loading
ivtv: Linux version: 2.6.13-gentoo-r1 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card (iTVC16 based)
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
msp34xx: ivtv version
msp34xx: init: chip=MSP3435G-B6, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Sep 20 2005 23:35:20
ivtv: i2c attach to card #0 ok [client=MSP3435G-B6, addr=40]
ivtv: i2c attach to card #0 ok [client=saa7115[50], addr=21]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
tveeprom: Hauppauge: model = 32031, rev = B110, serial# = 6789936
tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = MSP3435 (type = a)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02040024
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #0
ivtv: Initialized WinTV PVR 250, card #0
ivtv: ====================  END INIT IVTV  ====================
lirc_dev: IR Remote Control driver registered, at major 61
bttv: disagrees about version of symbol tveeprom_hauppauge_analog
bttv: Unknown symbol tveeprom_hauppauge_analog
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
ivtv: i2c attach to card #0 ok [client=Hauppauge IR, addr=18]
lirc_dev: lirc_register_plugin: sample_rate: 10