Linux version 2.6.18-1.2798.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:37:32 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffd1800 (usable) BIOS-e820: 000000003ffd1800 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. Using x86 segment limits to approximate NX protection On node 0 totalpages: 262097 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32721 pages, LIFO batch:7 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 DELL ) @ 0x000fc9b0 ACPI: RSDT (v001 DELL CPi R 0x27d50a02 ASL 0x00000061) @ 0x3ffd1f90 ACPI: FADT (v001 DELL CPi R 0x27d50a02 ASL 0x00000061) @ 0x3ffd2c00 ACPI: MADT (v001 DELL CPi R 0x27d50a02 ASL 0x00000047) @ 0x3ffd3400 ACPI: ASF! (v016 DELL CPi R 0x27d50a02 ASL 0x00000061) @ 0x3ffd3000 ACPI: MCFG (v016 DELL CPi R 0x27d50a02 ASL 0x00000061) @ 0x3ffd33c0 ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x3ffd23e6 ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x3ffd220e ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x3ffd2013 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Detected 1862.095 MHz processor. Built 1 zonelists. Total pages: 262097 Kernel command line: ro root=LABEL=/ rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07ae000 soft=c078e000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032660k/1048388k available (2138k kernel code, 14920k reserved, 868k data, 240k init, 130884k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3727.83 BogoMIPS (lpj=7455673) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9f3ff 00100000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed ACPI: Core revision 20060707 CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 Total of 1 processors activated (3727.83 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=424 bytes sizeof(dentry)=148 bytes sizeof(ext3inode)=600 bytes sizeof(buffer_head)=52 bytes sizeof(skbuff)=172 bytes sizeof(task_struct)=1392 bytes checking if image is initramfs... it is Freeing initrd memory: 1492k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ LMPWR] OemTableId [ DELLLOM] [20060707] ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1080-10bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved pnp: 00:02: ioport range 0x1008-0x100f could not be reserved pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved pnp: 00:03: ioport range 0x1006-0x1007 has been reserved pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved pnp: 00:03: ioport range 0x1060-0x107f has been reserved pnp: 00:03: ioport range 0x1080-0x10bf has been reserved pnp: 00:03: ioport range 0x10c0-0x10df has been reserved pnp: 00:08: ioport range 0x900-0x90f has been reserved pnp: 00:08: ioport range 0x910-0x91f has been reserved pnp: 00:08: ioport range 0x920-0x92f has been reserved pnp: 00:08: ioport range 0x93c-0x93f has been reserved pnp: 00:08: ioport range 0x940-0x97f has been reserved pnp: 00:0d: ioport range 0x930-0x93b has been reserved PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: dfd00000-dfefffff PREFETCH window: d0000000-d7ffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: dfc00000-dfcfffff PREFETCH window: disabled. PCI: Bus 4, cardbus bridge: 0000:03:01.0 IO window: 00002000-000020ff IO window: 00002400-000024ff PREFETCH window: 50000000-51ffffff MEM window: 52000000-53ffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: dfb00000-dfbfffff PREFETCH window: 50000000-51ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:03:01.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 177 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1162816134.688:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 8BDC589434DBC709 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x1 ACPI: Thermal Zone [THM] (37 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: AGP aperture is 256M @ 0x0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 209 ACPI: PCI interrupt for device 0000:00:1e.3 disabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe Probing IDE interface ide1... hdc: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ide-floppy driver 0.99.newide Yenta: CardBus bridge found at 0000:03:01.0 [1028:0182] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:03:01.0, mfunc 0x01111122, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 177 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff cs: IO port probe 0x2000-0x2fff: clean. pcmcia: parent PCI bridge Memory window: 0xdfb00000 - 0xdfbfffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 240k freed Write protecting the kernel read-only data: 386k Time: tsc clocksource has been installed. Time: acpi_pm clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000bf80 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 209, io base 0x0000bf60 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000bf40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000bf20 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected input: PS/2 Mouse as /class/input/input1 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 169, io mem 0xffa80800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.00 loaded. ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 209 ACPI: PCI interrupt for device 0000:00:1f.2 disabled ahci: probe of 0000:00:1f.2 failed with error -12 ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] PCI: Enabling device 0000:00:1f.2 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 209 ata: 0x170 IDE port busy PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14 scsi0 : ata_piix ata1.00: ATA-6, max UDMA/100, 156301488 sectors: LBA ata1.00: ata1: dev 0 multi count 8 ata1.00: applying bridge limits ata1.00: configured for UDMA/100 Vendor: ATA Model: FUJITSU MHV2080A Rev: 0000 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: Attached scsi disk sda EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 7483398 ext3_orphan_cleanup: deleting unreferenced inode 5915480 EXT3-fs: sda1: 2 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1162816146.537:2): selinux=0 auid=4294967295 ieee80211_crypt: registered algorithm 'NULL' input: PC Speaker as /class/input/input3 ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 tg3.c:v3.65 (August 07, 2006) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:22:ce:7e:e2 eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 209 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection Floppy drive(s): fd0 is 1.44M cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. sd 0:0:0:0: Attached scsi generic sg0 type 0 ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2 ipw2200: Unable to load firmware: -2 ipw2200: failed to register network device ACPI: PCI interrupt for device 0000:03:03.0 disabled ipw2200: probe of 0000:03:03.0 failed with error -5 ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1e.2 to 64 Intel 82802 RNG detected intel_rng: cannot enable RNG, aborting intel_rng: RNG registering failed (-5) intel8x0_measure_ac97_clock: measured 55509 usecs intel8x0: clocking to 48000 PCI: Enabling device 0000:00:1e.3 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1e.3 to 64 MC'97 1 converters and GPIO not ready (0xff00) floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes. [fglrx] module loaded - fglrx 8.30.3 [Oct 26 2006] on minor 0 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ACPI: ACPI Dock Station Driver ibm_acpi: ec object not found ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 522104k swap on /dev/sda3. Priority:-1 extents:1 across:522104k PM: Writing back config space on device 0000:02:00.0 at offset c (was d7c70000, writing 0) ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 eth0: no IPv6 routers present [fglrx] total GART = 134217728 [fglrx] free GART = 118226944 [fglrx] max single GART = 118226944 [fglrx] total LFB = 58929152 [fglrx] free LFB = 47034368 [fglrx] max single LFB = 47034368 [fglrx] total Inv = 0 [fglrx] free Inv = 0 [fglrx] max single Inv = 0 [fglrx] total TIM = 0 usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice input: USB Optical Mouse as /class/input/input4 input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-1