This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by LinuxCNC configure 2.6.0~pre, which was generated by GNU Autoconf 2.69. Invocation command line was $ ./configure --with-posix ## --------- ## ## Platform. ## ## --------- ## hostname = i7-ssd uname -m = x86_64 uname -r = 3.8.0-29-generic uname -s = Linux uname -v = #42-Ubuntu SMP Tue Aug 13 19:40:39 UTC 2013 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /home/anders/Desktop/linuxcnc-ubc3/bin PATH: /home/anders/Desktop/linuxcnc-ubc3/libexec PATH: /home/anders/Desktop/linuxcnc-ubc3/scripts PATH: /home/anders/Desktop/linuxcnc-ubc3/tcl PATH: /usr/lib/lightdm/lightdm PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/sbin PATH: /usr/bin PATH: /sbin PATH: /bin PATH: /usr/games PATH: /usr/local/games ## ----------- ## ## Core tests. ## ## ----------- ## configure:2499: checking libgl1-mesa-dri workaround configure:2513: result: not required configure:2520: checking build toplevel configure:2523: result: /home/anders/Desktop/linuxcnc-ubc3 configure:2532: checking installation prefix configure:2536: result: run in place configure:2559: checking for grep configure:2577: found /bin/grep configure:2589: result: /bin/grep configure:2599: checking for egrep configure:2617: found /bin/egrep configure:2629: result: /bin/egrep configure:2639: checking for arch configure:2657: found /usr/bin/arch configure:2669: result: /usr/bin/arch configure:2733: checking for gcc configure:2749: found /usr/bin/gcc configure:2760: result: gcc configure:2791: checking for C compiler version configure:2800: gcc --version >&5 gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:2811: $? = 0 configure:2800: gcc -v >&5 Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.7/lto-wrapper Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.7.3-1ubuntu1' --with-bugurl=file:///usr/share/doc/gcc-4.7/README.Bugs --enable-languages=c,c++,go,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.7 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.7 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --with-system-zlib --enable-objc-gc --with-cloog --enable-cloog-backend=ppl --disable-cloog-version-check --disable-ppl-version-check --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) configure:2811: $? = 0 configure:2800: gcc -V >&5 gcc: error: unrecognized command line option '-V' gcc: fatal error: no input files compilation terminated. configure:2811: $? = 4 configure:2800: gcc -qversion >&5 gcc: error: unrecognized command line option '-qversion' gcc: fatal error: no input files compilation terminated. configure:2811: $? = 4 configure:2831: checking whether the C compiler works configure:2853: gcc conftest.c >&5 configure:2857: $? = 0 configure:2905: result: yes configure:2908: checking for C compiler default output file name configure:2910: result: a.out configure:2916: checking for suffix of executables configure:2923: gcc -o conftest conftest.c >&5 configure:2927: $? = 0 configure:2949: result: configure:2971: checking whether we are cross compiling configure:2979: gcc -o conftest conftest.c >&5 configure:2983: $? = 0 configure:2990: ./conftest configure:2994: $? = 0 configure:3009: result: no configure:3014: checking for suffix of object files configure:3036: gcc -c conftest.c >&5 configure:3040: $? = 0 configure:3061: result: o configure:3065: checking whether we are using the GNU C compiler configure:3084: gcc -c conftest.c >&5 configure:3084: $? = 0 configure:3093: result: yes configure:3102: checking whether gcc accepts -g configure:3122: gcc -c -g conftest.c >&5 configure:3122: $? = 0 configure:3163: result: yes configure:3180: checking for gcc option to accept ISO C89 configure:3243: gcc -c -g -O2 conftest.c >&5 configure:3243: $? = 0 configure:3256: result: none needed configure:3281: checking how to run the C preprocessor configure:3312: gcc -E conftest.c configure:3312: $? = 0 configure:3326: gcc -E conftest.c conftest.c:9:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:3326: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "LinuxCNC" | #define PACKAGE_TARNAME "linuxcnc" | #define PACKAGE_VERSION "2.6.0~pre" | #define PACKAGE_STRING "LinuxCNC 2.6.0~pre" | #define PACKAGE_BUGREPORT "emc-developers@lists.sourceforge.net" | #define PACKAGE_URL "" | /* end confdefs.h. */ | #include configure:3351: result: gcc -E configure:3371: gcc -E conftest.c configure:3371: $? = 0 configure:3385: gcc -E conftest.c conftest.c:9:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:3385: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "LinuxCNC" | #define PACKAGE_TARNAME "linuxcnc" | #define PACKAGE_VERSION "2.6.0~pre" | #define PACKAGE_STRING "LinuxCNC 2.6.0~pre" | #define PACKAGE_BUGREPORT "emc-developers@lists.sourceforge.net" | #define PACKAGE_URL "" | /* end confdefs.h. */ | #include configure:3449: checking build system type configure:3463: result: x86_64-unknown-linux-gnu configure:3483: checking host system type configure:3496: result: x86_64-unknown-linux-gnu configure:3803: checking platform configure:3833: result: using default platform: PC configure:3839: checking whether to build programming examples configure:3850: result: not building example programs configure:3857: checking whether to use the common shared memory driver configure:3881: result: default is no configure:3887: checking whether to use inb/outb or ppdev ioctl on the x86 for parport I/O configure:3911: result: using defaults: no configure:3917: checking whether to build the emcweb interface configure:3928: result: not building the emcweb interface configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-21 configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-21-generic configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-22 configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-22-generic configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-23 configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-23-generic configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-25 configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-25-generic configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-26 configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-26-generic configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-27 configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-27-generic configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-29 configure:3958: result: not found configure:3949: checking for configured kernel source in /usr/src/linux-headers-3.8.0-29-generic configure:3958: result: not found configure:4314: checking -lrt for RT_PREEMPT and POSIX configure:4336: gcc -o conftest -g -O2 conftest.c -lrt >&5 configure:4336: $? = 0 configure:4339: result: ok configure:4353: checking whether to build POSIX threads configure:4357: result: yes configure:4365: checking whether to build RT_PREEMPT threads configure:4369: result: no configure:4539: checking whether to build Xenomai userland threads configure:4545: result: no configure:4548: checking whether to build Xenomai kernel threads configure:4557: result: no configure:4733: checking whether to build RTAI threads configure:4743: result: no configure:4754: checking whether to build hardware drivers configure:4766: result: yes configure:4769: checking whether to build usermode PCI hardware drivers configure:4787: result: no configure:5107: checking for usability of rdtscll from asm/msr.h configure:5124: gcc -o conftest -g -O2 conftest.c >&5 /tmp/ccqi5oab.o: In function `use_rdtscll': /home/anders/Desktop/linuxcnc-ubc3/src/conftest.c:16: undefined reference to `rdtscll' collect2: error: ld returned 1 exit status configure:5124: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "LinuxCNC" | #define PACKAGE_TARNAME "linuxcnc" | #define PACKAGE_VERSION "2.6.0~pre" | #define PACKAGE_STRING "LinuxCNC 2.6.0~pre" | #define PACKAGE_BUGREPORT "emc-developers@lists.sourceforge.net" | #define PACKAGE_URL "" | #define BUILD_DRIVERS /**/ | #define HAVE_LIBUDEV /**/ | #define TARGET_PLATFORM_PC /**/ | #define HAVE_POSIX_THREADS /**/ | /* end confdefs.h. */ | | #include | #include | void use_rdtscll(void) { long long tsc; rdtscll(tsc); } | | int | main () | { | | ; | return 0; | } configure:5136: result: no configure:5139: checking for usability of linux/hidraw.h configure:5156: gcc -o conftest -g -O2 conftest.c >&5 configure:5156: $? = 0 configure:5168: result: yes configure:5189: checking for libmodbus3 configure:5193: result: yes - version 3.0.3 configure:5356: checking for glib configure:5360: result: yes - 2.36.0 configure:5385: checking for GTK 2.4.0 or above configure:5389: result: yes - 2.24.17 configure:5393: checking for libgnomeprintui-2.2 configure:5402: result: no -- printing from classicladder will not be possible configure:5486: checking for g++ configure:5502: found /usr/bin/g++ configure:5513: result: g++ configure:5540: checking for C++ compiler version configure:5549: g++ --version >&5 g++ (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:5560: $? = 0 configure:5549: g++ -v >&5 Using built-in specs. COLLECT_GCC=g++ COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.7/lto-wrapper Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.7.3-1ubuntu1' --with-bugurl=file:///usr/share/doc/gcc-4.7/README.Bugs --enable-languages=c,c++,go,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.7 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.7 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --with-system-zlib --enable-objc-gc --with-cloog --enable-cloog-backend=ppl --disable-cloog-version-check --disable-ppl-version-check --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) configure:5560: $? = 0 configure:5549: g++ -V >&5 g++: error: unrecognized command line option '-V' g++: fatal error: no input files compilation terminated. configure:5560: $? = 4 configure:5549: g++ -qversion >&5 g++: error: unrecognized command line option '-qversion' g++: fatal error: no input files compilation terminated. configure:5560: $? = 4 configure:5564: checking whether we are using the GNU C++ compiler configure:5583: g++ -c conftest.cpp >&5 configure:5583: $? = 0 configure:5592: result: yes configure:5601: checking whether g++ accepts -g configure:5621: g++ -c -g conftest.cpp >&5 configure:5621: $? = 0 configure:5662: result: yes configure:5686: checking whether make sets $(MAKE) configure:5708: result: yes configure:5760: checking for ranlib configure:5776: found /usr/bin/ranlib configure:5787: result: ranlib configure:5811: checking for ar configure:5829: found /usr/bin/ar configure:5841: result: /usr/bin/ar configure:5851: checking for install configure:5869: found /usr/bin/install configure:5881: result: /usr/bin/install configure:5891: checking for sed configure:5909: found /bin/sed configure:5921: result: /bin/sed configure:5931: checking for ps configure:5949: found /bin/ps configure:5961: result: /bin/ps configure:5971: checking for kill configure:5989: found /bin/kill configure:6001: result: /bin/kill configure:6011: checking for whoami configure:6029: found /usr/bin/whoami configure:6041: result: /usr/bin/whoami configure:6051: checking for awk configure:6069: found /usr/bin/awk configure:6081: result: /usr/bin/awk configure:6091: checking for insmod configure:6109: found /sbin/insmod configure:6122: result: /sbin/insmod configure:6132: checking for rmmod configure:6150: found /sbin/rmmod configure:6163: result: /sbin/rmmod configure:6173: checking for lsmod configure:6191: found /sbin/lsmod configure:6204: result: /sbin/lsmod configure:6214: checking for pidof configure:6232: found /bin/pidof configure:6245: result: /bin/pidof configure:6255: checking for ipcs configure:6273: found /usr/bin/ipcs configure:6286: result: /usr/bin/ipcs configure:6296: checking for fuser configure:6314: found /bin/fuser configure:6327: result: /bin/fuser configure:6337: checking for mandb configure:6355: found /usr/bin/mandb configure:6368: result: /usr/bin/mandb configure:6442: checking for python configure:6460: found /usr/bin/python configure:6473: result: /usr/bin/python configure:6486: checking whether to build documentation configure:6523: result: no configure:7051: checking for grep that handles long lines and -e configure:7109: result: /bin/grep configure:7114: checking for egrep configure:7176: result: /bin/egrep configure:7181: checking for ANSI C header files configure:7201: gcc -c -g -O2 conftest.c >&5 configure:7201: $? = 0 configure:7274: gcc -o conftest -g -O2 conftest.c >&5 configure:7274: $? = 0 configure:7274: ./conftest configure:7274: $? = 0 configure:7285: result: yes configure:7293: checking for sys/wait.h that is POSIX.1 compatible configure:7319: gcc -c -g -O2 conftest.c >&5 configure:7319: $? = 0 configure:7326: result: yes configure:7336: checking for semtimedop configure:7336: gcc -o conftest -g -O2 conftest.c >&5 configure:7336: $? = 0 configure:7336: result: yes configure:7350: checking for clock_getres configure:7350: gcc -o conftest -g -O2 conftest.c -lm -lrt >&5 configure:7350: $? = 0 configure:7350: result: yes configure:7361: checking for sincos function configure:7375: gcc -o conftest -g -O2 conftest.c -lm -lrt >&5 conftest.c: In function 'main': conftest.c:32:1: warning: incompatible implicit declaration of built-in function 'sincos' [enabled by default] configure:7375: $? = 0 configure:7385: result: yes configure:7390: checking for __sincos configure:7390: gcc -o conftest -g -O2 conftest.c -lm -lrt >&5 /tmp/ccH0gdzS.o: In function `main': /home/anders/Desktop/linuxcnc-ubc3/src/conftest.c:63: undefined reference to `__sincos' collect2: error: ld returned 1 exit status configure:7390: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "LinuxCNC" | #define PACKAGE_TARNAME "linuxcnc" | #define PACKAGE_VERSION "2.6.0~pre" | #define PACKAGE_STRING "LinuxCNC 2.6.0~pre" | #define PACKAGE_BUGREPORT "emc-developers@lists.sourceforge.net" | #define PACKAGE_URL "" | #define BUILD_DRIVERS /**/ | #define HAVE_LIBUDEV /**/ | #define TARGET_PLATFORM_PC /**/ | #define HAVE_POSIX_THREADS /**/ | #define HIDRAW_H_USABLE /**/ | #define HAVE_LIBMODBUS3 yes | #define EMC2_DEFAULT_NMLFILE "/home/anders/Desktop/linuxcnc-ubc3/configs/common/linuxcnc.nml" | #define EMC2_DEFAULT_TOOLTABLE "/home/anders/Desktop/linuxcnc-ubc3/configs/sim/sim.tbl" | #define EMC2_HOME "/home/anders/Desktop/linuxcnc-ubc3" | #define EMC2_BIN_DIR "/home/anders/Desktop/linuxcnc-ubc3/bin" | #define EMC2_PO_DIR "/home/anders/Desktop/linuxcnc-ubc3/share/locale" | #define EMC2_NCFILES_DIR "/home/anders/Desktop/linuxcnc-ubc3/nc_files" | #define EMC2_IMAGE_DIR "/home/anders/Desktop/linuxcnc-ubc3" | #define PRELOAD_WORKAROUND "" | #define GIT_VERSION "v2.6.0~pre~unified-build-candidate-3~a5bce14" | #define STDC_HEADERS 1 | #define HAVE_SYS_WAIT_H 1 | #define HAVE_SEMTIMEDOP 1 | #define HAVE_CLOCK_GETRES 1 | #define HAVE_SINCOS 1 | /* end confdefs.h. */ | /* Define __sincos to an innocuous variant, in case declares __sincos. | For example, HP-UX 11i declares gettimeofday. */ | #define __sincos innocuous___sincos | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char __sincos (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef __sincos | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char __sincos (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub___sincos || defined __stub_____sincos | choke me | #endif | | int | main () | { | return __sincos (); | ; | return 0; | } configure:7390: result: no configure:7409: Building rtapi.ini generator script configure:7481: checking for tcl configure:7602: result: /usr/lib/tclConfig.sh found configure:7609: checking for tk configure:7718: result: /usr/lib/tkConfig.sh found configure:7747: checking for BWidget using /usr/bin/tclsh8.5 configure:7750: result: found configure:7757: checking for BLT using tclsh8.5 configure:7760: result: found configure:7788: checking for X configure:7896: gcc -E conftest.c configure:7896: $? = 0 configure:7927: gcc -o conftest -g -O2 conftest.c -lX11 >&5 configure:7927: $? = 0 configure:7977: result: libraries , headers configure:8076: gcc -o conftest -g -O2 conftest.c -lX11 >&5 configure:8076: $? = 0 configure:8174: checking for gethostbyname configure:8174: gcc -o conftest -g -O2 conftest.c >&5 configure:8174: $? = 0 configure:8174: result: yes configure:8271: checking for connect configure:8271: gcc -o conftest -g -O2 conftest.c >&5 configure:8271: $? = 0 configure:8271: result: yes configure:8320: checking for remove configure:8320: gcc -o conftest -g -O2 conftest.c >&5 configure:8320: $? = 0 configure:8320: result: yes configure:8369: checking for shmat configure:8369: gcc -o conftest -g -O2 conftest.c >&5 configure:8369: $? = 0 configure:8369: result: yes configure:8427: checking for IceConnectionNumber in -lICE configure:8452: gcc -o conftest -g -O2 conftest.c -lICE >&5 configure:8452: $? = 0 configure:8461: result: yes configure:8479: checking X11/extensions/Xinerama.h usability configure:8479: gcc -c -g -O2 conftest.c >&5 configure:8479: $? = 0 configure:8479: result: yes configure:8479: checking X11/extensions/Xinerama.h presence configure:8479: gcc -E conftest.c configure:8479: $? = 0 configure:8479: result: yes configure:8479: checking for X11/extensions/Xinerama.h configure:8479: result: yes configure:8492: checking for XineramaQueryExtension in -lXinerama configure:8517: gcc -o conftest -g -O2 conftest.c -lXinerama >&5 configure:8517: $? = 0 configure:8526: result: yes configure:8554: checking for X11/Xaw/XawInit.h configure:8554: gcc -c -g -O2 conftest.c >&5 configure:8554: $? = 0 configure:8554: result: yes configure:8569: checking for XawDialogGetValueString in -lXaw configure:8594: gcc -o conftest -g -O2 conftest.c -lXaw -lXinerama -lSM -lICE >&5 configure:8594: $? = 0 configure:8603: result: yes configure:8636: checking readline/readline.h usability configure:8636: gcc -c -g -O2 conftest.c >&5 configure:8636: $? = 0 configure:8636: result: yes configure:8636: checking readline/readline.h presence configure:8636: gcc -E conftest.c configure:8636: $? = 0 configure:8636: result: yes configure:8636: checking for readline/readline.h configure:8636: result: yes configure:8650: checking readline/history.h usability configure:8650: gcc -c -g -O2 conftest.c >&5 configure:8650: $? = 0 configure:8650: result: yes configure:8650: checking readline/history.h presence configure:8650: gcc -E conftest.c configure:8650: $? = 0 configure:8650: result: yes configure:8650: checking for readline/history.h configure:8650: result: yes configure:8664: checking for readline in -lreadline configure:8689: gcc -o conftest -g -O2 conftest.c -lreadline >&5 configure:8689: $? = 0 configure:8698: result: yes configure:8706: checking for readline in -lreadline configure:8731: gcc -o conftest -g -O2 conftest.c -lreadline -ltermcap >&5 configure:8731: $? = 0 configure:8740: result: yes configure:8773: checking ncurses.h usability configure:8773: gcc -c -g -O2 conftest.c >&5 configure:8773: $? = 0 configure:8773: result: yes configure:8773: checking ncurses.h presence configure:8773: gcc -E conftest.c configure:8773: $? = 0 configure:8773: result: yes configure:8773: checking for ncurses.h configure:8773: result: yes configure:8786: checking for initscr in -lncurses configure:8811: gcc -o conftest -g -O2 conftest.c -lncurses >&5 configure:8811: $? = 0 configure:8820: result: yes configure:8865: checking locale.h usability configure:8865: gcc -c -g -O2 conftest.c >&5 configure:8865: $? = 0 configure:8865: result: yes configure:8865: checking locale.h presence configure:8865: gcc -E conftest.c configure:8865: $? = 0 configure:8865: result: yes configure:8865: checking for locale.h configure:8865: result: yes configure:8877: checking for setlocale configure:8877: gcc -o conftest -g -O2 conftest.c -lncurses >&5 configure:8877: $? = 0 configure:8877: result: yes configure:8894: checking libintl.h usability configure:8894: gcc -c -g -O2 conftest.c >&5 configure:8894: $? = 0 configure:8894: result: yes configure:8894: checking libintl.h presence configure:8894: gcc -E conftest.c configure:8894: $? = 0 configure:8894: result: yes configure:8894: checking for libintl.h configure:8894: result: yes configure:8904: checking for gettext in -lintl configure:8929: gcc -o conftest -g -O2 conftest.c -lintl -lncurses >&5 conftest.c:48:6: warning: conflicting types for built-in function 'gettext' [enabled by default] /usr/bin/ld: cannot find -lintl collect2: error: ld returned 1 exit status configure:8929: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "LinuxCNC" | #define PACKAGE_TARNAME "linuxcnc" | #define PACKAGE_VERSION "2.6.0~pre" | #define PACKAGE_STRING "LinuxCNC 2.6.0~pre" | #define PACKAGE_BUGREPORT "emc-developers@lists.sourceforge.net" | #define PACKAGE_URL "" | #define BUILD_DRIVERS /**/ | #define HAVE_LIBUDEV /**/ | #define TARGET_PLATFORM_PC /**/ | #define HAVE_POSIX_THREADS /**/ | #define HIDRAW_H_USABLE /**/ | #define HAVE_LIBMODBUS3 yes | #define EMC2_DEFAULT_NMLFILE "/home/anders/Desktop/linuxcnc-ubc3/configs/common/linuxcnc.nml" | #define EMC2_DEFAULT_TOOLTABLE "/home/anders/Desktop/linuxcnc-ubc3/configs/sim/sim.tbl" | #define EMC2_HOME "/home/anders/Desktop/linuxcnc-ubc3" | #define EMC2_BIN_DIR "/home/anders/Desktop/linuxcnc-ubc3/bin" | #define EMC2_PO_DIR "/home/anders/Desktop/linuxcnc-ubc3/share/locale" | #define EMC2_NCFILES_DIR "/home/anders/Desktop/linuxcnc-ubc3/nc_files" | #define EMC2_IMAGE_DIR "/home/anders/Desktop/linuxcnc-ubc3" | #define PRELOAD_WORKAROUND "" | #define GIT_VERSION "v2.6.0~pre~unified-build-candidate-3~a5bce14" | #define STDC_HEADERS 1 | #define HAVE_SYS_WAIT_H 1 | #define HAVE_SEMTIMEDOP 1 | #define HAVE_CLOCK_GETRES 1 | #define HAVE_SINCOS 1 | #define HAVE_X11_EXTENSIONS_XINERAMA_H 1 | #define HAVE_LIBXINERAMA 1 | #define HAVE_X11_XAW_XAWINIT_H 1 | #define HAVE_LIBXAW 1 | #define HAVE_READLINE_READLINE_H 1 | #define HAVE_READLINE_HISTORY_H 1 | #define HAVE_READLINE /**/ | #define HAVE_NCURSES_H 1 | #define HAVE_LIBNCURSES 1 | #define HAVE_LOCALE_H 1 | #define HAVE_SETLOCALE 1 | #define HAVE_LIBINTL_H 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char gettext (); | int | main () | { | return gettext (); | ; | return 0; | } configure:8938: result: no configure:8981: checking for xgettext configure:8999: found /usr/bin/xgettext configure:9012: result: /usr/bin/xgettext configure:9024: checking for xgettext tcl bug configure:9032: result: xgettext version 0.18.1 OK configure:9044: checking for msgfmt configure:9062: found /usr/bin/msgfmt configure:9075: result: /usr/bin/msgfmt configure:9086: checking for --tcl support in msgfmt configure:9089: result: yes configure:9097: checking for Python support configure:9114: result: yes configure:9122: checking python version configure:9128: result: OK configure:9131: checking version of python libraries configure:9134: result: python2.7 configure:9137: checking match between tk and Tkinter versions configure:9154: result: 8.5 configure:9157: checking location of Python header files configure:9160: result: /usr/include/python2.7 configure:9163: checking for Python headers configure:9177: result: -I/usr/include/python2.7 configure:9181: checking for Python libraries configure:9191: result: -lpthread -ldl -lutil configure:9212: checking whether the Boost::Python headers are available configure:9232: g++ -c -g -O2 -I/usr/include/python2.7 conftest.cpp >&5 configure:9232: $? = 0 configure:9239: result: yes configure:9255: checking for boost::python shared library configure:9272: g++ -o conftest -g -O2 -I/usr/include/python2.7 conftest.cpp -lXinerama -lpython2.7 -lboost_python >&5 configure:9272: $? = 0 configure:9283: result: -lboost_python configure:9306: checking /usr/include/python2.7/Python.h usability configure:9306: gcc -c -g -O2 conftest.c >&5 configure:9306: $? = 0 configure:9306: result: yes configure:9306: checking /usr/include/python2.7/Python.h presence configure:9306: gcc -E conftest.c configure:9306: $? = 0 configure:9306: result: yes configure:9306: checking for /usr/include/python2.7/Python.h configure:9306: result: yes configure:9315: checking for site-package location configure:9318: result: /usr/lib/python2.7/dist-packages configure:9324: checking GL/gl.h usability configure:9324: gcc -c -g -O2 conftest.c >&5 configure:9324: $? = 0 configure:9324: result: yes configure:9324: checking GL/gl.h presence configure:9324: gcc -E conftest.c configure:9324: $? = 0 configure:9324: result: yes configure:9324: checking for GL/gl.h configure:9324: result: yes configure:9324: checking GL/glu.h usability configure:9324: gcc -c -g -O2 conftest.c >&5 configure:9324: $? = 0 configure:9324: result: yes configure:9324: checking GL/glu.h presence configure:9324: gcc -E conftest.c configure:9324: $? = 0 configure:9324: result: yes configure:9324: checking for GL/glu.h configure:9324: result: yes configure:9337: checking for glBegin in -lGL configure:9362: gcc -o conftest -g -O2 conftest.c -lGL -lXinerama >&5 configure:9362: $? = 0 configure:9371: result: yes configure:9385: checking for working GLU quadrics configure:9402: gcc -c -g -O2 conftest.c >&5 configure:9402: $? = 0 configure:9403: result: yes configure:9413: checking for Xmu headers configure:9417: checking X11/Xmu/Xmu.h usability configure:9417: gcc -c -g -O2 conftest.c >&5 configure:9417: $? = 0 configure:9417: result: yes configure:9417: checking X11/Xmu/Xmu.h presence configure:9417: gcc -E conftest.c configure:9417: $? = 0 configure:9417: result: yes configure:9417: checking for X11/Xmu/Xmu.h configure:9417: result: yes configure:10476: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by LinuxCNC config.status 2.6.0~pre, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on i7-ssd config.status:1027: creating ../scripts/gen-rtapi.ini.sh config.status:1027: creating ../docs/src/man/man1/linuxcnc.1 config.status:1027: creating ../scripts/linuxcnc config.status:1027: creating ../scripts/halrun config.status:1027: creating ../scripts/rip-environment config.status:1027: creating ../scripts/haltcl config.status:1027: creating ../scripts/realtime config.status:1027: creating ../scripts/latencyplot config.status:1027: creating ../scripts/latencyhistogram config.status:1027: creating Makefile.inc config.status:1027: creating Makefile.modinc config.status:1027: creating ../tcl/linuxcnc.tcl config.status:1027: creating ../lib/python/nf.py config.status:1027: creating ../scripts/linuxcncmkdesktop config.status:1027: creating ../share/applications/linuxcnc-latency.desktop config.status:1027: creating ../share/applications/linuxcnc-latencyplot.desktop config.status:1027: creating ../share/applications/linuxcnc.desktop config.status:1027: creating ../share/desktop-directories/cnc.directory config.status:1027: creating ../share/menus/CNC.menu config.status:1027: creating linuxcncconfig.py-tmp config.status:1027: creating config.h config.status:1197: config.h is unchanged configure:11669: result: touching up ../lib/python/linuxcncconfig.py configure:11674: checking usability of ../lib/python/linuxcncconfig.py configure:11677: result: done ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_boost_python=yes ac_cv_build=x86_64-unknown-linux-gnu ac_cv_c_compiler_gnu=yes ac_cv_cxx_compiler_gnu=yes ac_cv_env_CCC_set= ac_cv_env_CCC_value= ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set= ac_cv_env_CFLAGS_value= ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_CXXFLAGS_set= ac_cv_env_CXXFLAGS_value= ac_cv_env_CXX_set= ac_cv_env_CXX_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_XMKMF_set= ac_cv_env_XMKMF_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_func___sincos=no ac_cv_func_clock_getres=yes ac_cv_func_connect=yes ac_cv_func_gethostbyname=yes ac_cv_func_remove=yes ac_cv_func_semtimedop=yes ac_cv_func_setlocale=yes ac_cv_func_shmat=yes ac_cv_have_x='have_x=yes ac_x_includes='\'''\'' ac_x_libraries='\'''\''' ac_cv_header_GL_gl_h=yes ac_cv_header_GL_glu_h=yes ac_cv_header_X11_Xaw_XawInit_h=yes ac_cv_header_X11_Xmu_Xmu_h=yes ac_cv_header_X11_extensions_Xinerama_h=yes ac_cv_header__usr_include_python2_7_Python_h=yes ac_cv_header_libintl_h=yes ac_cv_header_locale_h=yes ac_cv_header_ncurses_h=yes ac_cv_header_readline_history_h=yes ac_cv_header_readline_readline_h=yes ac_cv_header_stdc=yes ac_cv_header_sys_wait_h=yes ac_cv_host=x86_64-unknown-linux-gnu ac_cv_lib_GL_glBegin=yes ac_cv_lib_ICE_IceConnectionNumber=yes ac_cv_lib_Xaw_XawDialogGetValueString=yes ac_cv_lib_Xinerama_XineramaQueryExtension=yes ac_cv_lib_intl_gettext=no ac_cv_lib_ncurses_initscr=yes ac_cv_objext=o ac_cv_path_AR=/usr/bin/ar ac_cv_path_ARCHCMD=/usr/bin/arch ac_cv_path_AWK=/usr/bin/awk ac_cv_path_EGREP=/bin/egrep ac_cv_path_FUSER=/bin/fuser ac_cv_path_GREP=/bin/grep ac_cv_path_INSMOD=/sbin/insmod ac_cv_path_INSTALL=/usr/bin/install ac_cv_path_IPCS=/usr/bin/ipcs ac_cv_path_KILL=/bin/kill ac_cv_path_LSMOD=/sbin/lsmod ac_cv_path_MANDB=/usr/bin/mandb ac_cv_path_MSGFMT=/usr/bin/msgfmt ac_cv_path_PIDOF=/bin/pidof ac_cv_path_PS=/bin/ps ac_cv_path_PYTHON=/usr/bin/python ac_cv_path_RMMOD=/sbin/rmmod ac_cv_path_SED=/bin/sed ac_cv_path_WHOAMI=/usr/bin/whoami ac_cv_path_XGETTEXT=/usr/bin/xgettext ac_cv_prog_CPP='gcc -E' ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_ac_ct_CXX=g++ ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_cc_c89= ac_cv_prog_cc_g=yes ac_cv_prog_cxx_g=yes ac_cv_prog_make_make_set=yes ## ----------------- ## ## Output variables. ## ## ----------------- ## AR='/usr/bin/ar' ARCHCMD='/usr/bin/arch' ARCHITECTURE='x86_64' ASCIIDOC='' AUTODIRS='' AWK='/usr/bin/awk' BOOST_CPPFLAGS='' BOOST_LDFLAGS='' BOOST_PYTHON_LIBS='-lboost_python' BOOST_SERIALIZATION_LIB='' BOOST_THREAD_LIB='' BUILD_DOCS='no' BUILD_DOCS_HTML='' BUILD_DOCS_PDF='' BUILD_DRIVERS='yes' BUILD_EMCWEB='no' BUILD_EXAMPLES='no' BUILD_PYTHON='yes' BUILD_THREAD_FLAVORS=' posix' CC='gcc' CFLAGS='-g -O2' CONVERT='' CPP='gcc -E' CPPFLAGS='' CXX='g++' CXXFLAGS='-g -O2' DATE='Tue Sep 3 18:43:15 EEST 2013' DBLATEX='' DEFAULT_NMLFILE='/home/anders/Desktop/linuxcnc-ubc3/configs/common/linuxcnc.nml' DEFS='-DHAVE_CONFIG_H' DVIPNG='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/bin/egrep' EMC2VERSION='2.6.0~pre' EMC2_BIN_DIR='/home/anders/Desktop/linuxcnc-ubc3/bin' EMC2_HELP_DIR='/home/anders/Desktop/linuxcnc-ubc3/docs/help' EMC2_HOME='/home/anders/Desktop/linuxcnc-ubc3' EMC2_ICON='/home/anders/Desktop/linuxcnc-ubc3/linuxcncicon.png' EMC2_IMAGE_DIR='/home/anders/Desktop/linuxcnc-ubc3' EMC2_LANG_DIR='/home/anders/Desktop/linuxcnc-ubc3/src/objects' EMC2_LATENCYPLOT_SCRIPT='/home/anders/Desktop/linuxcnc-ubc3/scripts/latencyplot' EMC2_LATENCY_SCRIPT='/home/anders/Desktop/linuxcnc-ubc3/scripts/latency-test' EMC2_LIBEXEC_DIR='/home/anders/Desktop/linuxcnc-ubc3/libexec' EMC2_NCFILES_DIR='/home/anders/Desktop/linuxcnc-ubc3/nc_files' EMC2_RTLIB_DIR='/home/anders/Desktop/linuxcnc-ubc3/rtlib' EMC2_SCRIPT='/home/anders/Desktop/linuxcnc-ubc3/scripts/emc' EMC2_SUFFIX=' (run-in-place)' EMC2_SYSTEM_CONFIG_DIR='${prefix}/etc/linuxcnc' EMC2_TCL_DIR='/home/anders/Desktop/linuxcnc-ubc3/tcl' EMC2_TCL_LIB_DIR='/home/anders/Desktop/linuxcnc-ubc3/tcl' EPSTOPDF='' EXEEXT='' FUSER='/bin/fuser' GIT_VERSION='v2.6.0~pre~unified-build-candidate-3~a5bce14' GLIB_CFLAGS='-I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include ' GLIB_LIBS='-lglib-2.0 ' GREP='/bin/grep' GS='' GTK_CFLAGS='-pthread -I/usr/include/gtk-2.0 -I/usr/lib/x86_64-linux-gnu/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/harfbuzz ' GTK_LIBS='-lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lglib-2.0 ' GTK_VER='2.24.17' HAVE_GNOMEPRINT='' HAVE_LIBINTL='' HAVE_LIBINTL_H='' HAVE_LIBMODBUS3='yes' HAVE_LOCALE_H='' HAVE_NCURSES='yes' HAVE_POSIX_THREADS='yes' HAVE_READLINE='yes' HAVE_RTAI_KERNEL_THREADS='no' HAVE_RT_PREEMPT_THREADS='no' HAVE_WORKING_BLT='yes' HAVE_XAW='yes' HAVE_XENOMAI_KERNEL_THREADS='no' HAVE_XENOMAI_THREADS='no' HIDRAW_H_USABLE='yes' INCLUDEPY='/usr/include/python2.7' INSMOD='/home/anders/Desktop/linuxcnc-ubc3/bin/linuxcnc_module_helper insert' INSTALL='/usr/bin/install' IPCS='/usr/bin/ipcs' KILL='/bin/kill' LANGUAGES='' LDFLAGS='' LIBMODBUS_CFLAGS='-I/usr/include/modbus ' LIBMODBUS_LIBS='-lmodbus ' LIBOBJS='' LIBPYTHON='python2.7' LIBS='-lGL -lXinerama ' LIBUDEV_CFLAGS='' LIBUDEV_LIBS='' LINUXCNC_CONFIG_PATH='~/linuxcnc/configs:/home/anders/Desktop/linuxcnc-ubc3/configs' LOCALEDIR='/usr/share/locale' LSMOD='/sbin/lsmod' LTLIBOBJS='' MANDB='/usr/bin/mandb' MSGFMT='/usr/bin/msgfmt' NCURSES_LIBS='-lncurses' OBJEXT='o' PACKAGE='linuxcnc' PACKAGE_BUGREPORT='emc-developers@lists.sourceforge.net' PACKAGE_NAME='LinuxCNC' PACKAGE_STRING='LinuxCNC 2.6.0~pre' PACKAGE_TARNAME='linuxcnc' PACKAGE_URL='' PACKAGE_VERSION='2.6.0~pre' PATH_SEPARATOR=':' PDFLATEX='' PIDOF='/bin/pidof' POSIX_THREADS_BUILD_SYS='user-dso' POSIX_THREADS_EXTRA_KMODS='' POSIX_THREADS_FLAVOR_ID='0' POSIX_THREADS_LDFLAGS='-lpthread -lrt' POSIX_THREADS_RTDIR='' POSIX_THREADS_RTFLAGS=' -pthread' POSIX_THREADS_RTS='' POSIX_THREADS_SOURCE='rt-preempt' PRECISE_MULTILIB_BUG='' PRELOAD_WORKAROUND='' PS='/bin/ps' PYTHON='/usr/bin/python' PYTHON_CPPFLAGS='-I/usr/include/python2.7' PYTHON_LIBS='-lpthread -ldl -lutil' RANLIB='ranlib' READLINE_LIBS='-lreadline' REALTIME='/home/anders/Desktop/linuxcnc-ubc3/scripts/realtime' RMMOD='/home/anders/Desktop/linuxcnc-ubc3/bin/linuxcnc_module_helper remove' RTAI_KERNEL_THREADS_BUILD_SYS='kbuild' RTAI_KERNEL_THREADS_EXTRA_KMODS='rtai_hal rtai_sched rtai_math' RTAI_KERNEL_THREADS_EXTRA_SYMBOLS='' RTAI_KERNEL_THREADS_FLAVOR_ID='4' RTAI_KERNEL_THREADS_KERNEL_DIRS='' RTAI_KERNEL_THREADS_KERNEL_MATH_CFLAGS='' RTAI_KERNEL_THREADS_LDFLAGS='' RTAI_KERNEL_THREADS_RTDIR='' RTAI_KERNEL_THREADS_RTFLAGS='' RTAI_KERNEL_THREADS_RTS='' RTAI_KERNEL_THREADS_SOURCE='rtai-kernel' RTDIR='' RT_PREEMPT_THREADS_BUILD_SYS='user-dso' RT_PREEMPT_THREADS_EXTRA_KMODS='' RT_PREEMPT_THREADS_FLAVOR_ID='1' RT_PREEMPT_THREADS_LDFLAGS='' RT_PREEMPT_THREADS_RTDIR='' RT_PREEMPT_THREADS_RTFLAGS='' RT_PREEMPT_THREADS_RTS='' RT_PREEMPT_THREADS_SOURCE='rt-preempt' RUN_IN_PLACE='yes' SED='/bin/sed' SET_MAKE='' SHELL='/bin/bash' SHMDRV_KERNEL_DIRS='' SITEPY='/usr/lib/python2.7/dist-packages' SOURCE_HIGHLIGHT='' TARGET_PLATFORM='PC' TCLSH='/usr/bin/tclsh8.5' TCL_CFLAGS='-I/usr/include/tcl8.5 -DUSE_TCL_STUBS' TCL_DBGX='' TCL_LIBS='-L/usr/lib/x86_64-linux-gnu -ltclstub8.5' TK_CFLAGS='-I/usr/include/tcl8.5 ' TK_DBGX='' TK_LIBS='-lX11 -lXss -lXext -lXft -lfontconfig -lpthread -ldl -lpthread -lieee -lm -L/usr/lib/x86_64-linux-gnu -ltk8.5' USERMODE_PCI='no' USE_NLS='yes' USE_PORTABLE_PARPORT_IO='no' USE_SHMDRV='no' WHOAMI='/usr/bin/whoami' WISH='/usr/bin/wish8.5' XAW_LIBS=' -lSM -lICE -lX11 -lXaw -lXt' XENOMAI_KERNEL_THREADS_BUILD_SYS='kbuild' XENOMAI_KERNEL_THREADS_EXTRA_KMODS='xeno_math' XENOMAI_KERNEL_THREADS_EXTRA_SYMBOLS='' XENOMAI_KERNEL_THREADS_FLAVOR_ID='3' XENOMAI_KERNEL_THREADS_KERNEL_DIRS='' XENOMAI_KERNEL_THREADS_KERNEL_MATH_CFLAGS='' XENOMAI_KERNEL_THREADS_LDFLAGS='' XENOMAI_KERNEL_THREADS_RTDIR='' XENOMAI_KERNEL_THREADS_RTFLAGS='' XENOMAI_KERNEL_THREADS_RTS='' XENOMAI_KERNEL_THREADS_SOURCE='xenomai-kernel' XENOMAI_THREADS_BUILD_SYS='user-dso' XENOMAI_THREADS_EXTRA_KMODS='' XENOMAI_THREADS_FLAVOR_ID='2' XENOMAI_THREADS_LDFLAGS='' XENOMAI_THREADS_RTDIR='' XENOMAI_THREADS_RTFLAGS='' XENOMAI_THREADS_RTS='' XENOMAI_THREADS_SOURCE='xenomai' XGETTEXT='/usr/bin/xgettext' XMKMF='' XSLTPROC='' X_CFLAGS='' X_EXTRA_LIBS='' X_LIBS='' X_PRE_LIBS=' -lSM -lICE' ac_ct_CC='gcc' ac_ct_CXX='g++' bindir='${exec_prefix}/bin' build='x86_64-unknown-linux-gnu' build_alias='' build_cpu='x86_64' build_os='linux-gnu' build_vendor='unknown' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='${prefix}' host='x86_64-unknown-linux-gnu' host_alias='' host_cpu='x86_64' host_os='linux-gnu' host_vendor='unknown' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/home/anders/Desktop/linuxcnc-ubc3' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "LinuxCNC" #define PACKAGE_TARNAME "linuxcnc" #define PACKAGE_VERSION "2.6.0~pre" #define PACKAGE_STRING "LinuxCNC 2.6.0~pre" #define PACKAGE_BUGREPORT "emc-developers@lists.sourceforge.net" #define PACKAGE_URL "" #define BUILD_DRIVERS /**/ #define HAVE_LIBUDEV /**/ #define TARGET_PLATFORM_PC /**/ #define HAVE_POSIX_THREADS /**/ #define HIDRAW_H_USABLE /**/ #define HAVE_LIBMODBUS3 yes #define EMC2_DEFAULT_NMLFILE "/home/anders/Desktop/linuxcnc-ubc3/configs/common/linuxcnc.nml" #define EMC2_DEFAULT_TOOLTABLE "/home/anders/Desktop/linuxcnc-ubc3/configs/sim/sim.tbl" #define EMC2_HOME "/home/anders/Desktop/linuxcnc-ubc3" #define EMC2_BIN_DIR "/home/anders/Desktop/linuxcnc-ubc3/bin" #define EMC2_PO_DIR "/home/anders/Desktop/linuxcnc-ubc3/share/locale" #define EMC2_NCFILES_DIR "/home/anders/Desktop/linuxcnc-ubc3/nc_files" #define EMC2_IMAGE_DIR "/home/anders/Desktop/linuxcnc-ubc3" #define PRELOAD_WORKAROUND "" #define GIT_VERSION "v2.6.0~pre~unified-build-candidate-3~a5bce14" #define STDC_HEADERS 1 #define HAVE_SYS_WAIT_H 1 #define HAVE_SEMTIMEDOP 1 #define HAVE_CLOCK_GETRES 1 #define HAVE_SINCOS 1 #define HAVE_X11_EXTENSIONS_XINERAMA_H 1 #define HAVE_LIBXINERAMA 1 #define HAVE_X11_XAW_XAWINIT_H 1 #define HAVE_LIBXAW 1 #define HAVE_READLINE_READLINE_H 1 #define HAVE_READLINE_HISTORY_H 1 #define HAVE_READLINE /**/ #define HAVE_NCURSES_H 1 #define HAVE_LIBNCURSES 1 #define HAVE_LOCALE_H 1 #define HAVE_SETLOCALE 1 #define HAVE_LIBINTL_H 1 #define HAVE_BOOST_PYTHON 1 #define HAVE_GL_GL_H 1 #define HAVE_GL_GLU_H 1 #define HAVE_LIBGL 1 #define HAVE_X11_XMU_XMU_H 1 configure: exit 0 ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by LinuxCNC config.status 2.6.0~pre, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status -q --header=config.h on i7-ssd config.status:1027: creating config.h config.status:1197: config.h is unchanged ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by LinuxCNC config.status 2.6.0~pre, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status --file=../docs/man/man1/linuxcnc.1:../docs/src/man/man1/linuxcnc.1.in on i7-ssd config.status:1027: creating ../docs/man/man1/linuxcnc.1 ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by LinuxCNC config.status 2.6.0~pre, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status -q --header=config.h on i7-ssd config.status:1027: creating config.h config.status:1197: config.h is unchanged ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by LinuxCNC config.status 2.6.0~pre, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status -q --header=config.h on i7-ssd config.status:1027: creating config.h config.status:1197: config.h is unchanged