root@pc:/usr/local/warsow_0.2# smartctl -a /dev/hda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: SAMSUNG SV1604N Serial Number: S01FJ10Y240672 Firmware Version: TR100-30 User Capacity: 160.041.885.696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Mon Nov 13 20:24:12 2006 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (7200) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 120) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 4736 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 301 5 Reallocated_Sector_Ct 0x0033 100 100 011 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Half_Minutes 0x0032 100 100 000 Old_age Always - 2003h+43m 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 151 194 Temperature_Celsius 0x0022 127 091 000 Old_age Always - 37 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1937 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 051 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100 100 051 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 733 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 733 occurred at disk power-on lifetime: 2003 hours (83 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 4f c2 e0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 da 00 00 4f c2 e0 00 08:10:29.688 SMART RETURN STATUS ec 00 00 45 6a 9d e0 00 08:10:29.688 IDENTIFY DEVICE ef 02 00 00 00 00 e0 00 00:00:22.375 SET FEATURES [Enable write cache] ec 00 01 00 00 00 a0 00 00:00:20.625 IDENTIFY DEVICE c6 00 00 00 00 00 a0 00 00:00:20.625 SET MULTIPLE MODE Error 732 occurred at disk power-on lifetime: 1996 hours (83 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 01 4f c2 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d9 00 01 4f c2 a0 00 00:00:07.500 SMART DISABLE OPERATIONS ec 20 3f 01 00 00 a0 00 00:00:07.500 IDENTIFY DEVICE 10 20 3f 01 00 00 a0 00 00:00:07.500 RECALIBRATE [OBS-4] 91 20 3f 01 00 00 af 00 00:00:07.500 INITIALIZE DEVICE PARAMETERS [OBS-6] ec 00 00 01 00 00 a0 00 00:00:07.500 IDENTIFY DEVICE Error 731 occurred at disk power-on lifetime: 1988 hours (82 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 01 4f c2 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d9 00 01 4f c2 a0 00 04:53:48.750 SMART DISABLE OPERATIONS ec 20 3f 01 00 00 a0 00 04:53:48.750 IDENTIFY DEVICE 10 20 3f 01 00 00 a0 00 04:53:48.750 RECALIBRATE [OBS-4] 91 20 3f 01 00 00 af 00 04:53:48.750 INITIALIZE DEVICE PARAMETERS [OBS-6] ec 00 00 01 00 00 a0 00 04:53:48.750 IDENTIFY DEVICE Error 730 occurred at disk power-on lifetime: 1984 hours (82 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 01 4f c2 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d9 00 01 4f c2 a0 00 00:08:12.063 SMART DISABLE OPERATIONS ec 20 3f 01 00 00 a0 00 00:08:12.063 IDENTIFY DEVICE 10 20 3f 01 00 00 a0 00 00:08:12.063 RECALIBRATE [OBS-4] 91 20 3f 01 00 00 af 00 00:08:12.063 INITIALIZE DEVICE PARAMETERS [OBS-6] ec 00 00 01 00 00 a0 00 00:08:12.063 IDENTIFY DEVICE Error 729 occurred at disk power-on lifetime: 1984 hours (82 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 01 4f c2 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d9 00 01 4f c2 a0 00 00:00:07.500 SMART DISABLE OPERATIONS ec 20 3f 01 00 00 a0 00 00:00:07.500 IDENTIFY DEVICE 10 20 3f 01 00 00 a0 00 00:00:07.500 RECALIBRATE [OBS-4] 91 20 3f 01 00 00 af 00 00:00:07.500 INITIALIZE DEVICE PARAMETERS [OBS-6] ec 00 00 01 00 00 a0 00 00:00:07.500 IDENTIFY DEVICE SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1743 - Device does not support Selective Self Tests/Logging