root@htcuniversal:~$ dmesg
<5>Linux version 2.6.18-hh0 (jrs@linuxserver) (gcc version 4.1.1) #1 Mon Nov 13 22:27:27 CET 2006
<4>CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f
<4>Machine: HTC Universal
<4>Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 16384
<7>  DMA zone: 16384 pages, LIFO batch:3
<6>Run Mode clock: 208.00MHz (*16)
<6>Turbo Mode clock: 520.00MHz (*2.5, active)
<6>Memory clock: 208.00MHz (/2)
<6>System bus clock: 208.00MHz
<4>CPU0: D VIVT undefined 5 cache
<4>CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
<4>CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
<4>Built 1 zonelists.  Total pages: 16384
<5>Kernel command line: root=/dev/mmcblk0p3 console=tty0 mem=64M fbcon=rotate:1
<4>PID hash table entries: 512 (order: 9, 2048 bytes)
<4>start_kernel(): bug: interrupts were enabled early
<4>Console: colour dummy device 80x30
<4>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>Memory: 64MB = 64MB total
<5>Memory: 62140KB available (2164K code, 467K data, 96K init)
<7>Calibrating delay loop... 519.37 BogoMIPS (lpj=2596864)
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<7>PM: Adding info for No Bus:platform
<6>NET: Registered protocol family 16
<7>PM: Adding info for platform:asic3.0
<7>PM: Adding info for platform:htcuniversal_core.0
<7>PM: Adding info for platform:gpio-keys.0
<7>PM: Adding info for platform:pxa2xx-mci
<7>PM: Adding info for platform:pxa2xx-udc
<7>PM: Adding info for platform:pxa2xx-fb
<7>PM: Adding info for platform:pxa2xx-uart.0
<7>PM: Adding info for platform:pxa2xx-uart.1
<7>PM: Adding info for platform:pxa2xx-uart.2
<7>PM: Adding info for platform:pxa2xx-ir
<7>PM: Adding info for platform:pxa2xx-i2c.0
<7>PM: Adding info for platform:pxa2xx-i2s
<7>PM: Adding info for platform:sa1100-rtc
<7>PM: Adding info for platform:pxa27x-ohci
<5>SCSI subsystem initialized
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<4>asic3: using irq 160-229 on irq 46
<7>PM: Adding info for platform:asic3_mmc.1283
<7>PM: Adding info for platform:htcuniversal_lcd.0
<7>PM: Adding info for platform:corgi-bl.0
<7>PM: Adding info for platform:htcuniversal_ts.0
<7>PM: Adding info for platform:htcuniversal_bt
<7>PM: Adding info for platform:htcuniversal_kbd.0
<7>PM: Adding info for platform:htcuniversal_phone
<7>PM: Adding info for platform:htcuniversal_power.
<7>PM: Adding info for platform:htcuniversal_udc.0
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 512 (order: -1, 2048 bytes)
<4>TCP established hash table entries: 2048 (order: 1, 8192 bytes)
<4>TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP: Hash tables configured (established 2048 bind 1024)
<6>TCP reno registered
<5>HTC Universal Core Hardware Driver
<5>HTC Universal Core: egpio at phy=0x0a000000 is at virt=0xc4804000
<5>HTC Universal Touch Screen Driver
<4>htcuniversal: ts_probe
<6>input: htcuniversal_ts as /class/input/input0
<6>input: htcuniversal_kb as /class/input/input1
<4>htcuniversal_kp: cover_rotate 1
<4>htcuniversal_kp: clamshell  1
<4>htcuniversal_kp: night_sensor  0
<5>htcuniversal Bluetooth Driver
<4>NetWinder Floating Point Emulator V0.97 (double precision)
<6>NTFS driver 2.1.27 [Flags: R/O].
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<4>Corgi Backlight Driver Initialized.
<4>Console: switching to colour frame buffer device 80x30
<7>PM: Adding info for platform:sa-pxa-rtc
<6>SA1100 Real Time Clock driver v1.03
<6>pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
<6>pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
<6>pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
<6>loop: loaded (max 8 devices)
<6>usbcore: registered new driver cdc_ether
<6>usbcore: registered new driver net1080
<6>usbcore: registered new driver zaurus
<6>mice: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<7>i2c-core: driver [dev_driver] registered
<7>i2c-core: driver [eeprom] registered
<6>TCP bic registered
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<4>asic3_mmc: ASIC3 MMC/SD Driver, controller at 0xc000000
<7>PM: Adding info for mmc:mmc0:b368
<6>mmcblk0: mmc0:b368 TWTTI 999936KiB
<6> mmcblk0: p1 p2 p3 p4
<6>kjournald starting.  Commit interval 5 seconds
<4>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
<6>EXT3 FS on mmcblk0p3, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>VFS: Mounted root (ext3 filesystem).
<6>Freeing init memory: 96K
<5>htcuniversal Phone Driver
<5>htcuniversal Power Management Driver
<4>htcuniversal: your DS267x unique id is 30 ee 02 6e 11 00 00 c9
<6>htcuniversal power_change: ac_in=0
<6>htcuniversal power_change: usb_in=0
<6>kjournald starting.  Commit interval 5 seconds
<4>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
<6>EXT3 FS on mmcblk0p4, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>Adding 125976k swap on /dev/mmcblk0p2.  Priority:-1 extents:1 across:125976k
<6>Bluetooth: Core ver 2.10
<7>PM: Adding info for platform:bluetooth
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP ver 2.8
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
<4>htcuniversal_wlan_init: acx-mem platform_device_register
<7>PM: Adding info for platform:acx-mem.0
<6>NET: Registered protocol family 23
<6>IrCOMM protocol (Dag Brattli)
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM ver 1.8
<7>i2c-core: driver [ak4641-i2c] registered
<7>Resetting I2C Controller Unit
<7>PM: Adding info for No Bus:i2c-0
<7>i2c_adapter i2c-0: adapter [pxa2xx-i2c] registered
<7>i2c-dev: adapter [pxa2xx-i2c] registered as minor 0
<7>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x50
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x50, len=0
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000442:000007e0]
<7>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x51
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x51, len=0
<7>Resetting I2C Controller Unit
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x51, len=0
<7>Resetting I2C Controller Unit
<7>i2c_adapter i2c-0: client [eeprom] registered with bus id 0-0051
<7>PM: Adding info for i2c:0-0051
<7>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x52
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x52, len=0
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000442:000007e0]
<7>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x53
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x53, len=0
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000442:000007e0]
<7>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x54
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x54, len=0
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000442:000007e0]
<7>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x55
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=0
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000442:000007e0]
<7>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x56
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x56, len=0
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000442:000007e0]
<7>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x57
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x57, len=0
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000442:000007e0]
<6>I2C: i2c-0: PXA I2C adapter
<5>snd_htcuniversal_audio_set_codec_reset: 1
<5>snd_htcuniversal_audio_set_codec_power: 1
<5>snd_htcuniversal_audio_set_codec_reset: 0
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=0
<7>Resetting I2C Controller Unit
<7>i2c_adapter i2c-0: client [ak4641-i2c at 0-0012] registered with bus id 0-0012
<7>PM: Adding info for i2c:0-0012
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[1] R, addr=0x12, len=1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<5>snd_htcuniversal_audio_set_headphone_detect: 0
<7>PM: Adding info for platform:HTC Universal Audio
<6>ALSA sound/arm/pxa2xx-i2sound.c:881: PXA2xx i2Sound: HTC Universal Audio activated
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<4>htcuniversal_kp: clamshell_rotate 0
<4>htcuniversal_kp: clamshell_rotate 1
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x12, len=2
<6>pxa27x_udc: version 21-Jul-2005
<7>PM: Adding info for No Bus:gadget
<4>ether gadget: using random self ethernet address
<6>usb0: Ethernet Gadget, version: May Day 2005
<6>usb0: using pxa27x_udc, OUT Bulk-out-2 IN Bulk-in-1
<6>usb0: MAC 9a:77:3e:01:87:8e
<6>htcuniversal power_change: ac_in=0
<6>htcuniversal power_change: usb_in=1
<6>udc: USB reset
<6>udc: USB reset
<6>udc: USB reset