dmesg
Linux version 2.6.17.14-0.1.x86.i686.cmov (conary.rpath.com@rpl:1) (gcc version 3.4.4) #1 Tue Oct 17 13:22:46 EDT 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
 BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ffed080 (usable)
 BIOS-e820: 000000007ffed080 - 000000007fff0000 (ACPI data)
 BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 524269
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 294893 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 IBM                                   ) @ 0x000fdfc0
ACPI: RSDT (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @ 0x7ffeff80
ACPI: FADT (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @ 0x7ffeff00
ACPI: MADT (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @ 0x7ffefe80
ACPI: DSDT (v001 IBM    SERBLADE 0x00001000 INTL 0x02002025) @ 0x00000000
ACPI: PM-Timer IO Port: 0x488
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3199.817 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2074316k/2097076k available (1848k kernel code, 21476k reserved, 745k data, 160k init, 1179572k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6403.53 BogoMIPS (lpj=12807070)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: L3 cache: 1024K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 0k freed
ACPI: setting ELCR to 0010 (from 0eb8)
checking if image is initramfs... it is
Freeing initrd memory: 1099k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd82c, last bus=4
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:01.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:02)
PCI: Probing PCI hardware (bus 02)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Root Bridge [PCI2] (0000:01)
PCI: Probing PCI hardware (bus 01)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Interrupt Link [LPUS] (IRQs *7)
ACPI: PCI Interrupt Link [LPID] (IRQs *14)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1163774695.292:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB6: IDE controller at PCI slot 0000:00:0f.1
SvrWks CSB6: chipset revision 176
SvrWks CSB6: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHT2040AS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices: 
PCI0 
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 160k freed
QLogic Fibre Channel HBA Driver
ACPI: PCI Interrupt 0000:02:02.0[A]: no GSI - using IRQ 3
PCI: setting IRQ 3 as level-triggered
qla2300 0000:02:02.0: Found an ISP2312, irq 3, iobase 0xf8816000
qla2300 0000:02:02.0: Configuring PCI space...
qla2300 0000:02:02.0: Configure NVRAM parameters...
qla2300 0000:02:02.0: Verifying loaded RISC code...
qla2300 0000:02:02.0: Extended memory detected (512 KB)...
qla2300 0000:02:02.0: Resizing request queue depth (2048 -> 4096)...
qla2300 0000:02:02.0: Waiting for LIP to complete...
qla2300 0000:02:02.0: LIP reset occured (f7f7).
qla2300 0000:02:02.0: LOOP UP detected (2 Gbps).
qla2300 0000:02:02.0: Topology - (F_Port), Host Loop address 0xffff
scsi0 : qla2xxx
qla2300 0000:02:02.0: 
 QLogic Fibre Channel HBA Driver: 8.01.04-k-fw
  QLogic IBM HS20 - 
  ISP2312: PCI-X (133 MHz) @ 0000:02:02.0 hdma-, host#=0, fw=3.03.20 IPX
ACPI: PCI Interrupt 0000:02:02.1[B]: no GSI - using IRQ 9
PCI: setting IRQ 9 as level-triggered
qla2300 0000:02:02.1: Found an ISP2312, irq 9, iobase 0xf8818000
qla2300 0000:02:02.1: Configuring PCI space...
qla2300 0000:02:02.1: Configure NVRAM parameters...
qla2300 0000:02:02.1: Verifying loaded RISC code...
  Vendor: APPLE     Model: Xserve RAID       Rev: 1.50
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 2171240448 512-byte hdwr sectors (1111675 MB)
sda: Write Protect is off
sda: Mode Sense: ad 00 00 08
SCSI device sda: drive cache: write back
SCSI device sda: 2171240448 512-byte hdwr sectors (1111675 MB)
sda: Write Protect is off
sda: Mode Sense: ad 00 00 08
SCSI device sda: drive cache: write back
 sda: sda1
sd 0:0:0:0: Attached scsi disk sda
  Vendor: APPLE     Model: Xserve RAID       Rev: 1.50
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sdb: 2171240448 512-byte hdwr sectors (1111675 MB)
sdb: Write Protect is off
sdb: Mode Sense: ad 00 00 08
SCSI device sdb: drive cache: write back
SCSI device sdb: 2171240448 512-byte hdwr sectors (1111675 MB)
sdb: Write Protect is off
sdb: Mode Sense: ad 00 00 08
SCSI device sdb: drive cache: write back
 sdb: sdb1
sd 0:0:1:0: Attached scsi disk sdb
  Vendor: APPLE     Model: Xserve RAID       Rev: 1.50
  Type:   Direct-Access                      ANSI SCSI revision: 05
sdc : very big device. try to use READ CAPACITY(16).
SCSI device sdc: 5860573184 512-byte hdwr sectors (3000613 MB)
sdc: Write Protect is off
sdc: Mode Sense: ad 00 00 08
SCSI device sdc: drive cache: write back
sdc : very big device. try to use READ CAPACITY(16).
SCSI device sdc: 5860573184 512-byte hdwr sectors (3000613 MB)
sdc: Write Protect is off
sdc: Mode Sense: ad 00 00 08
SCSI device sdc: drive cache: write back
 sdc: sdc1
sd 0:0:2:0: Attached scsi disk sdc
  Vendor: APPLE     Model: Xserve RAID       Rev: 1.50
  Type:   Direct-Access                      ANSI SCSI revision: 05
qla2300 0000:02:02.1: Extended memory detected (512 KB)...
qla2300 0000:02:02.1: Resizing request queue depth (2048 -> 4096)...
qla2300 0000:02:02.1: Waiting for LIP to complete...
qla2300 0000:02:02.1: Cable is unplugged...
scsi1 : qla2xxx
qla2300 0000:02:02.1: 
 QLogic Fibre Channel HBA Driver: 8.01.04-k-fw
  QLogic IBM HS20 - 
  ISP2312: PCI-X (133 MHz) @ 0000:02:02.1 hdma-, host#=1, fw=3.03.20 IPX
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
tg3.c:v3.59.1 (August 25, 2006)
ACPI: PCI Interrupt 0000:01:00.0[A]: no GSI - using IRQ 10
PCI: setting IRQ 10 as level-triggered
eth0: Tigon3 [partno(BCM95704A41) rev 2002 PHY(serdes)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:29:9f:8e
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[0] TSOcap[0] 
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:01:00.1[B]: no GSI - using IRQ 11
PCI: setting IRQ 11 as level-triggered
eth1: Tigon3 [partno(BCM95704A41) rev 2002 PHY(serdes)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:11:25:29:9f:8f
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] 
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
piix4_smbus 0000:00:0f.0: Unusual config register value
piix4_smbus 0000:00:0f.0: Try using fix_hstcfg=1 if you experience problems
piix4_smbus 0000:00:0f.0: Illegal Interrupt configuration (or code out of date)!
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:0f.2[A]: no GSI - using IRQ 7
PCI: setting IRQ 7 as level-triggered
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.2: irq 7, io mem 0xfebfe000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: Power Button (FF) [PWRF]
Using specific hotkey driver
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on hda2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: Using r5 hash to sort names
ReiserFS: dm-2: found reiserfs format "3.6" with standard journal
ReiserFS: dm-2: using ordered data mode
ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-2: checking transaction log (dm-2)
ReiserFS: dm-2: Using r5 hash to sort names
ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
ReiserFS: dm-3: using ordered data mode
ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-3: checking transaction log (dm-3)
ReiserFS: dm-3: Using r5 hash to sort names
ReiserFS: dm-4: found reiserfs format "3.6" with standard journal
ReiserFS: dm-4: using ordered data mode
ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-4: checking transaction log (dm-4)
ReiserFS: dm-4: Using r5 hash to sort names
ReiserFS: dm-5: found reiserfs format "3.6" with standard journal
ReiserFS: dm-5: using ordered data mode
ReiserFS: dm-5: journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-5: checking transaction log (dm-5)
ReiserFS: dm-5: Using r5 hash to sort names
ReiserFS: dm-6: found reiserfs format "3.6" with standard journal
ReiserFS: dm-6: using ordered data mode
ReiserFS: dm-6: journal params: device dm-6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-6: checking transaction log (dm-6)
ReiserFS: dm-6: Using r5 hash to sort names
ReiserFS: dm-7: found reiserfs format "3.6" with standard journal
ReiserFS: dm-7: using ordered data mode
ReiserFS: dm-7: journal params: device dm-7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-7: checking transaction log (dm-7)
ReiserFS: dm-7: Using r5 hash to sort names
ReiserFS: dm-8: found reiserfs format "3.6" with standard journal
ReiserFS: dm-8: using ordered data mode
ReiserFS: dm-8: journal params: device dm-8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-8: checking transaction log (dm-8)
ReiserFS: dm-8: Using r5 hash to sort names
ReiserFS: dm-9: found reiserfs format "3.6" with standard journal
ReiserFS: dm-9: using ordered data mode
ReiserFS: dm-9: journal params: device dm-9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-9: checking transaction log (dm-9)
ReiserFS: dm-9: Using r5 hash to sort names
ReiserFS: dm-10: found reiserfs format "3.6" with standard journal
ReiserFS: dm-10: using ordered data mode
ReiserFS: dm-10: journal params: device dm-10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-10: checking transaction log (dm-10)
ReiserFS: dm-10: Using r5 hash to sort names
ReiserFS: dm-11: found reiserfs format "3.6" with standard journal
ReiserFS: dm-11: using ordered data mode
ReiserFS: dm-11: journal params: device dm-11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-11: checking transaction log (dm-11)
ReiserFS: dm-11: Using r5 hash to sort names
ReiserFS: dm-12: found reiserfs format "3.6" with standard journal
ReiserFS: dm-12: using ordered data mode
ReiserFS: dm-12: journal params: device dm-12, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-12: checking transaction log (dm-12)
ReiserFS: dm-12: Using r5 hash to sort names
ReiserFS: dm-13: found reiserfs format "3.6" with standard journal
ReiserFS: dm-13: using ordered data mode
ReiserFS: dm-13: journal params: device dm-13, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-13: checking transaction log (dm-13)
ReiserFS: dm-13: Using r5 hash to sort names
ReiserFS: dm-15: found reiserfs format "3.6" with standard journal
ReiserFS: dm-15: using ordered data mode
ReiserFS: dm-15: journal params: device dm-15, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-15: checking transaction log (dm-15)
ReiserFS: dm-15: Using r5 hash to sort names
ReiserFS: dm-16: found reiserfs format "3.6" with standard journal
ReiserFS: dm-16: using ordered data mode
ReiserFS: dm-16: journal params: device dm-16, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-16: checking transaction log (dm-16)
ReiserFS: dm-16: Using r5 hash to sort names
ReiserFS: dm-17: found reiserfs format "3.6" with standard journal
ReiserFS: dm-17: using ordered data mode
ReiserFS: dm-17: journal params: device dm-17, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-17: checking transaction log (dm-17)
ReiserFS: dm-17: Using r5 hash to sort names
ReiserFS: dm-18: found reiserfs format "3.6" with standard journal
ReiserFS: dm-18: using ordered data mode
ReiserFS: dm-18: journal params: device dm-18, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-18: checking transaction log (dm-18)
ReiserFS: dm-18: Using r5 hash to sort names
ReiserFS: dm-19: found reiserfs format "3.6" with standard journal
ReiserFS: dm-19: using ordered data mode
ReiserFS: dm-19: journal params: device dm-19, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-19: checking transaction log (dm-19)
ReiserFS: dm-19: Using r5 hash to sort names
ReiserFS: dm-20: found reiserfs format "3.6" with standard journal
ReiserFS: dm-20: using ordered data mode
ReiserFS: dm-20: journal params: device dm-20, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-20: checking transaction log (dm-20)
ReiserFS: dm-20: Using r5 hash to sort names
ReiserFS: dm-21: found reiserfs format "3.6" with standard journal
ReiserFS: dm-21: using ordered data mode
ReiserFS: dm-21: journal params: device dm-21, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-21: checking transaction log (dm-21)
ReiserFS: dm-21: Using r5 hash to sort names
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-22, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-23, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: dm-24: found reiserfs format "3.6" with standard journal
ReiserFS: dm-24: using ordered data mode
ReiserFS: dm-24: journal params: device dm-24, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-24: checking transaction log (dm-24)
ReiserFS: dm-24: Using r5 hash to sort names
Adding 1052248k swap on /dev/hda3.  Priority:-1 extents:1 across:1052248k
PM: Writing back config space on device 0000:01:00.0 at offset b (was 164814e4, writing 29c1014)
PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 804000, writing 804008)
PM: Writing back config space on device 0000:01:00.0 at offset 2 (was 2000000, writing 2000002)
PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 2b00000, writing 2b00146)
PM: Writing back config space on device 0000:01:00.0 at offset 0 (was 164914e4, writing 16a814e4)
process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6 over IPv4 tunneling driver
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO