Psycho:~# dmesg
Linux version 2.6.16 (slug@nudi) (gcc version 3.4.4) #1 PREEMPT Thu Jun 8 23:38:13 PDT 2006
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)
Machine: Linksys NSLU2
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 8192
  DMA zone: 8192 pages, LIFO batch:1
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 0 pages, LIFO batch:0
  HighMem zone: 0 pages, LIFO batch:0
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: root=/dev/mtdblock4 rootfstype=jffs2 init=/linuxrc rtc-x1205.probe=0,0x6f  noirqdebug console=ttyS0,115200n8
PID hash table entries: 256 (order: 8, 4096 bytes)
IXP4xx: FREQ=66666600 COUNT=666665
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 30188KB available (1925K code, 180K data, 92K init)
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
IXP4xx: FREQ=66000000 COUNT=660001
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:01.1 on pci bus
dmabounce: registered device 0000:00:01.2 on pci bus
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize
libata version 1.20 loaded.
ata1: PATA max PIO4 cmd 0xC2852003 ctl 0xC285201D bmdma 0x0 irq 12
scsi0 : ixp4xx
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
IXP4XX-Flash.0: Found an alias at 0x800000 for the chip at 0x0
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x20000,blocks=64
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000
RedBoot directory 0x507e0000(0x20000) swapped
6 RedBoot partitions found on MTD device IXP4XX-Flash.0
Creating 6 MTD partitions on "IXP4XX-Flash.0":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00060000 : "SysConf"
0x00060000-0x00160000 : "Kernel"
0x00160000-0x00180000 : "Ramdisk"
0x00180000-0x007e0000 : "Flashdisk"
0x007e0000-0x00800000 : "FIS directory"
Using configured DiskOnChip probe address 0x50000000
PCI: enabling device 0000:00:01.2 (0140 -> 0142)
ehci_hcd 0000:00:01.2: EHCI Host Controller
ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000
ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: enabling device 0000:00:01.0 (0140 -> 0142)
ohci_hcd 0000:00:01.0: OHCI Host Controller
ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: enabling device 0000:00:01.1 (0140 -> 0142)
ohci_hcd 0000:00:01.1: OHCI Host Controller
ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
USB Universal Host Controller Interface driver v2.3
Initializing USB Mass Storage driver...
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 3-1.4: new full speed USB device using ohci_hcd and address 3
usb 3-1.4: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: ixp4xx beeper as /class/input/input0
i2c /dev entries driver
x1205 0-006f: chip found, driver version 1.0.6
x1205 0-006f: rtc intf: sysfs
x1205 0-006f: rtc intf: proc
x1205 0-006f: rtc intf: dev (254:0)
x1205 0-006f: rtc core: registered x1205 as rtc0
Registered led device: ready
Registered led device: status
Registered led device: disk-1
Registered led device: disk-2
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
x1205 0-006f: setting the system clock to 2006-11-18 15:00:04 (1163862004)
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 92K
  Vendor: FUJITSU   Model: MPA3043AT         Rev: 0000
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 8544940 512-byte hdwr sectors (4375 MB)
sda: Write Protect is off
sda: Mode Sense: 27 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 8544940 512-byte hdwr sectors (4375 MB)
sda: Write Protect is off
sda: Mode Sense: 27 00 00 00
sda: assuming drive cache: write through
 sda: sda1 sda2
sd 1:0:0:0: Attached scsi disk sda
usb-storage: device scan complete
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 493820k swap on /dev/sda2.  Priority:-1 extents:1 across:493820k
EXT3 FS on sda1, internal journal
Linux video capture interface: v1.00
/home/david/tmp/spca5xx-20060501/drivers/usb/spca5xx.c: USB SPCA5XX camera found. Type Labtec Webcam Pro Zc0302 + Hdcs2020
/home/david/tmp/spca5xx-20060501/drivers/usb/spca5xx.c: [spca5xx_probe:5480] Camera type JPEG
/home/david/tmp/spca5xx-20060501/drivers/usb/zc3xx.h: [zc3xx_config:543] Find Sensor PAS202BCB
/home/david/tmp/spca5xx-20060501/drivers/usb/spca5xx.c: [spca5xx_getcapability:1765] maxw 640 maxh 480 minw 176 minh 144
usbcore: registered new driver spca5xx
/home/david/tmp/spca5xx-20060501/drivers/usb/spca5xx.c: spca5xx driver 00.60.00 registered
ixp400: no version for "struct_module" found: kernel tainted.
ixp400: no version magic, tainting kernel.
ixp400: module license 'unspecified' taints kernel.
ixp400: Module init.
ixp400_eth: no version magic, tainting kernel.
ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. 1.5
ixp400_eth: CPU clock speed (approx) = 266 MHz
[message] ixEthMiiPhyScan, Mii 1: Mii PHY ID 00008201
ixp400_eth: Found PHY 0 at address 1
ixp400_eth: ethernet 0 using NPEB and the PHY at address 1
ixp400_eth: Use default MAC address 00:02:b3:01:01:01 for port 0
ixp400_eth: MAC address now set to 00:0f:66:88:1a:f6 for port 0
ixp400_eth: Use default MAC address 00:02:b3:02:02:02 for port 1