dmesg Linux version 2.6.9-42.0.3.ELsmp (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Mon Sep 25 17:28:02 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe8cc00 (usable) BIOS-e820: 000000007fe8cc00 - 000000007fe8ec00 (ACPI NVS) BIOS-e820: 000000007fe8ec00 - 000000007fe90c00 (ACPI data) BIOS-e820: 000000007fe90c00 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 NX (Execute Disable) protection: active On node 0 totalpages: 523916 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 294540 pages, LIFO batch:16 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 DELL ) @ 0x000fec10 ACPI: RSDT (v001 DELL PE1420 0x00000007 ASL 0x00000061) @ 0x000fcb50 ACPI: FADT (v001 DELL PE1420 0x00000007 ASL 0x00000061) @ 0x000fcb90 ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc5ef2 ACPI: MADT (v001 DELL PE1420 0x00000007 ASL 0x00000061) @ 0x000fcc04 ACPI: BOOT (v001 DELL PE1420 0x00000007 ASL 0x00000061) @ 0x000fccae ACPI: ASF! (v016 DELL PE1420 0x00000007 ASL 0x00000061) @ 0x000fccd6 ACPI: MCFG (v001 DELL PE1420 0x00000007 ASL 0x00000061) @ 0x000fcd3d ACPI: HPET (v001 DELL PE1420 0x00000007 ASL 0x00000061) @ 0x000fcd7b ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) Enabling APIC mode: Flat. Using 0 I/O APICs ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[48]) IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Built 1 zonelists Kernel command line: ro root=/dev/sda5 mapped APIC to ffffd000 (fee00000) Initializing CPU#0 CPU 0 irqstacks, hard=c03ee000 soft=c03ce000 PID hash table entries: 4096 (order: 12, 65536 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2072220k/2095664k available (1877k kernel code, 22516k reserved, 759k data, 184k init, 1178160k highmem) Using HPET for base-timer Using HPET for gettimeofday Detected 3192.280 MHz processor. Using hpet for high-res timesource Calibrating delay using timer specific routine.. 6387.78 BogoMIPS (lpj=3193891) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU0: Initial APIC ID: 0, Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 03 per-CPU timeslice cutoff: 2006.67 usecs. task migration cache decay timeout: 3 msecs. Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c03ef000 soft=c03cf000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6384.09 BogoMIPS (lpj=3192047) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU1: Initial APIC ID: 1, Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (24) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 03 Booting processor 2/6 eip 3000 CPU 2 irqstacks, hard=c03f0000 soft=c03d0000 Initializing CPU#2 Calibrating delay using timer specific routine.. 6384.17 BogoMIPS (lpj=3192087) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU2: Initial APIC ID: 6, Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel P4/Xeon Extended MCE MSRs (24) available CPU2: Thermal monitoring enabled CPU2: Intel(R) Xeon(TM) CPU 3.20GHz stepping 03 Booting processor 3/7 eip 3000 CPU 3 irqstacks, hard=c03f1000 soft=c03d1000 Initializing CPU#3 Calibrating delay using timer specific routine.. 6384.13 BogoMIPS (lpj=3192068) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU3: Initial APIC ID: 7, Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel P4/Xeon Extended MCE MSRs (24) available CPU3: Thermal monitoring enabled CPU3: Intel(R) Xeon(TM) CPU 3.20GHz stepping 03 Total of 4 processors activated (25540.18 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs zapping low mappings. checking if image is initramfs... it is Freeing initrd memory: 565k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb5dd, last bus=6 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 26 (level, low) -> IRQ 209 ACPI: PCI interrupt 0000:03:0d.0[A] -> GSI 49 (level, low) -> IRQ 217 ACPI: PCI interrupt 0000:03:0d.1[B] -> GSI 50 (level, low) -> IRQ 225 ACPI: PCI interrupt 0000:03:0e.0[A] -> GSI 48 (level, low) -> IRQ 233 Simple Boot Flag at 0x7a set to 0x80 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1164311667.949:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key CB84FAFEBB15BCBC - User ID: Red Hat, Inc. (Kernel Module GPG key) Intel E7520/7320/7525 detected.<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) ACPI: Processor [CPU3] (supports C1) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide1... hdc: GCR-8485B, ATAPI CD/DVD-ROM drive Using cfq io scheduler ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide0... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hdc: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 262144 (order: 9, 3145728 bytes) TCP: Hash tables configured (established 262144 bind 262144) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: VBTN PCI0 PCI1 PCI2 PCI3 PCI4 PCI5 PCI6 MOU USB0 USB1 USB2 USB3 Freeing unused kernel memory: 184k freed SCSI subsystem initialized ACPI: PCI interrupt 0000:03:0d.0[A] -> GSI 49 (level, low) -> IRQ 217 ACPI: PCI interrupt 0000:03:0d.1[B] -> GSI 50 (level, low) -> IRQ 225 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs (scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|RTI, 16bit) Vendor: SEAGATE Model: ST3146707LW Rev: D704 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:0:0: Tagged Queuing enabled. Depth 4 SCSI device sda: 286749480 512-byte hdwr sectors (146816 MB) SCSI device sda: drive cache: write through SCSI device sda: 286749480 512-byte hdwr sectors (146816 MB) SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sda4 < sda5 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 185 ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 185 ata1: SATA port has no device. scsi2 : ata_piix ata2: SATA port has no device. scsi3 : ata_piix EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks inserting floppy driver for 2.6.9-42.0.3.ELsmp Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI Copyright (c) 1999-2005 Intel Corporation. ACPI: PCI interrupt 0000:03:0e.0[A] -> GSI 48 (level, low) -> IRQ 233 e1000: 0000:03:0e.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:14:22:5c:1c:05 divert: allocating divert_blk for eth0 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection hw_random: RNG not detected ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 193, pci mem f8820800 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 169, io base 0000ff80 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 177, io base 0000ff60 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 185, io base 0000ff40 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169 uhci_hcd 0000:00:1d.3: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: irq 169, io base 0000ff20 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ACPI: Power Button (FF) [PWRF] EXT3 FS on sda5, internal journal device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Adding 2048276k swap on /dev/sda2. Priority:-1 extents:1 IA-32 Microcode Update Driver: v1.14 microcode: CPU0 already at revision 0x5 (current=0x5) microcode: CPU1 already at revision 0x5 (current=0x5) microcode: CPU2 already at revision 0x5 (current=0x5) microcode: CPU3 already at revision 0x5 (current=0x5) microcode: No new microdata for cpu 1 microcode: No new microdata for cpu 2 microcode: No new microdata for cpu 0 microcode: No new microdata for cpu 3 IA-32 Microcode Update Driver v1.14 unregistered parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8192 buckets, 65536 max) - 340 bytes per conntrack parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready NET: Registered protocol family 10 Disabled Privacy Extensions on device c0344160(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth0: no IPv6 routers present