;--- PROTOCOL TYPE (Parameter type 13H)
;--- Defines the network interface protocol.
;--- Possible values for the data are as follows:
;---    00H = Standard CAS.
;---    01H = PRI ISDN
;---    02H = No signaling.
;--- The default data value is 00H.

0013 01

;---
;--- FRAMING FORMAT (Parameter type 14H)
;--- Defines the T1 framing format.
;--- Possible values for the data are as follows:
;---    00H = D4 framing.
;---    01H = ESF framing. ESF is supported only in SCbus mode, PEB mode 
;---          in signalling insertion or when the protocol type (Parameter 
;---          type 13H) is PRI ISDN.
;--- The default data value is 00H.

0014 01

;---
;--- ENABLE/DISABLE the D channel (Parameter type 16H)
;--- Value 02 is used only when the protocol type (Parameter number 13H) is 
;--- PRI ISDN AND THE D CHANNEL IS NOT ON BOARD IN NFAS CONFIGURATION.
;--- Possible values for the data are as follows:
;---    00H = Undefined.
;---    01H = Enable the D CHANNEL
;---    02H = Disable the D channel. Used only when the board is used as non-
;---          D channel board in T1 NFAS enviroment.

0016 01

;---
;--- ZERO CODE SUPPRESSION MODE (Parameter type 20H)
;--- Sets the Zero Code Suppression mode for T1
;--- Possible values for the data are as follows:
;---    00H = No zero code suppression
;---    01H = B8ZS
;---    02H = Bit 7 jamming
;--- The default data value is 00H (no zero code suppression)

0020 01

;---
;--- Inverted D channel (Parameter type 23H)
;--- This feature is not applicable for DASS2 protocol
;---    00H = Not inverted
;---    01H = D channel is inverted
;--- The default value is 00H
;--- Must be set to 01H for D channel inversion 
;0023 01