] Detected 2992.594 MHz processor. [ 19.225083] Built 1 zonelists. Total pages: 393076 [ 19.225087] Kernel command line: dolvm2 root=/dev/ram0 ramdisk=8192 real_root=/dev/VolGroup00/LogVol00 quiet init=/linuxrc splash=silent,theme:sabayon vga=791 CONSOLE=/dev/tty1 [ 19.225450] mapped APIC to ffffd000 (fee00000) [ 19.225453] mapped IOAPIC to ffffc000 (fec00000) [ 19.225456] Enabling fast FPU save and restore... done. [ 19.225459] Enabling unmasked SIMD FPU exception support... done. [ 19.225464] Initializing CPU#0 [ 19.225537] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 19.225650] Console: colour dummy device 80x25 [ 19.226168] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 19.226715] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 19.279983] Memory: 1541816k/1572304k available (5336k kernel code, 29252k reserved, 2090k data, 476k init, 654800k highmem) [ 19.279987] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 19.339462] Calibrating delay using timer specific routine.. 5987.49 BogoMIPS (lpj=2993746) [ 19.339504] Security Framework v1.0.0 initialized [ 19.339510] SELinux: Initializing. [ 19.339528] SELinux: Starting in permissive mode [ 19.339537] selinux_register_security: Registering secondary module capability [ 19.339539] Capability LSM initialized as secondary [ 19.339555] Mount-cache hash table entries: 512 [ 19.339693] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 [ 19.339705] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 [ 19.339713] monitor/mwait feature present. [ 19.339715] using mwait in idle threads. [ 19.339722] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 19.339725] CPU: L2 cache: 1024K [ 19.339728] CPU: Physical Processor ID: 0 [ 19.339730] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000041d 00000000 00000000 [ 19.339742] Compat vDSO mapped to ffffe000. [ 19.339758] Checking 'hlt' instruction... OK. [ 19.343806] SMP alternatives: switching to UP code [ 19.344282] ACPI: Core revision 20060707 [ 19.367756] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [ 19.367768] SMP alternatives: switching to SMP code [ 19.367960] Booting processor 1/1 eip 3000 [ 19.378532] Initializing CPU#1 [ 19.439390] Calibrating delay using timer specific routine.. 5984.14 BogoMIPS (lpj=2992071) [ 19.439400] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 [ 19.439410] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 [ 19.439417] monitor/mwait feature present. [ 19.439425] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 19.439428] CPU: L2 cache: 1024K [ 19.439430] CPU: Physical Processor ID: 0 [ 19.439433] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000041d 00000000 00000000 [ 19.439708] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [ 19.439751] Total of 2 processors activated (11971.63 BogoMIPS). [ 19.439882] ENABLING IO-APIC IRQs [ 19.440046] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 19.551320] checking TSC synchronization across 2 CPUs: passed. [ 0.001000] Brought up 2 CPUs [ 0.170017] migration_cost=133 [ 0.170180] checking if image is initramfs... it is [ 0.503073] Freeing initrd memory: 7660k freed [ 0.503477] NET: Registered protocol family 16 [ 0.503641] EISA bus registered [ 0.503645] ACPI: bus type pci registered [ 0.503769] PCI: PCI BIOS revision 2.10 entry at 0xfbb30, last bus=2 [ 0.503775] PCI: Using configuration type 1 [ 0.503777] Setting up standard PCI resources [ 0.529324] ACPI: Interpreter enabled [ 0.529328] ACPI: Using IOAPIC for interrupt routing [ 0.533922] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.533926] PCI: Probing PCI hardware (bus 00) [ 0.533952] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 0.549081] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.549085] PCI quirk: region 0880-08bf claimed by ICH4 GPIO [ 0.549137] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 0.549339] Boot video device is 0000:01:00.0 [ 0.549649] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 0.549728] PCI: Transparent bridge - 0000:00:1e.0 [ 0.549756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.708867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.724991] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.725739] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.726486] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.727222] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.727972] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.728714] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.729454] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.730193] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.730382] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.730395] pnp: PnP ACPI init [ 0.760058] pnp: PnP ACPI: found 11 devices [ 0.760063] PnPBIOS: Disabled by ACPI PNP [ 0.760280] SCSI subsystem initialized [ 0.760349] usbcore: registered new driver usbfs [ 0.760395] usbcore: registered new driver hub [ 0.760456] PCI: Using ACPI for IRQ routing [ 0.760459] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.774863] pnp: 00:0a: ioport range 0x800-0x85f could not be reserved [ 0.774868] pnp: 00:0a: ioport range 0xc00-0xc7f has been reserved [ 0.774871] pnp: 00:0a: ioport range 0x860-0x8ff could not be reserved [ 0.774891] PCI: Bridge: 0000:00:01.0 [ 0.774894] IO window: disabled. [ 0.774899] MEM window: fc000000-feafffff [ 0.774903] PREFETCH window: d8000000-efffffff [ 0.774909] PCI: Bridge: 0000:00:1e.0 [ 0.774912] IO window: d000-dfff [ 0.774918] MEM window: fbf00000-fbffffff [ 0.774922] PREFETCH window: f0000000-f3ffffff [ 0.774939] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.774967] NET: Registered protocol family 2 [ 0.785463] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.785644] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.786286] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.786805] TCP: Hash tables configured (established 131072 bind 65536) [ 0.786808] TCP reno registered [ 0.787090] Simple Boot Flag value 0x87 read from CMOS RAM was invalid [ 0.787093] Simple Boot Flag at 0x7a set to 0x1 [ 0.792124] audit: initializing netlink socket (disabled) [ 0.792142] audit(1164990566.313:1): initialized [ 0.792279] highmem bounce pool size: 64 pages [ 0.792284] Total HugeTLB memory allocated, 0 [ 0.792377] VFS: Disk quotas dquot_6.5.1 [ 0.792406] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.792484] squashfs: version 3.1 (2006/08/19) Phillip Lougher [ 0.792503] Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu [ 0.792770] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.793000] NTFS driver 2.1.27 [Flags: R/W]. [ 0.793050] QNX4 filesystem 0.2.3 registered. [ 0.793053] fuse init (API version 7.7) [ 0.793134] JFS: nTxBlock = 8192, nTxLock = 65536 [ 0.797862] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 0.798089] SGI XFS Quota Management subsystem [ 0.798136] SELinux: Registering netfilter hooks [ 0.804432] Initializing Cryptographic API [ 0.804439] io scheduler noop registered [ 0.804449] io scheduler anticipatory registered (default) [ 0.804459] io scheduler deadline registered [ 0.804480] io scheduler cfq registered [ 0.837878] lp: driver loaded but no devices found [ 0.837957] Real Time Clock Driver v1.12ac [ 0.838008] toshiba: not a supported Toshiba laptop [ 0.844314] ppdev: user-space parallel port driver [ 0.844463] vesafb: framebuffer at 0xe0000000, mapped to 0xf8d00000, using 3072k, total 262144k [ 0.844467] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 0.844470] vesafb: protected mode interface info at c000:c6c0 [ 0.844473] vesafb: pmi: set display start = c00cc6f6, set palette = c00cc760 [ 0.844475] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.844492] vesafb: scrolling: redraw [ 0.844495] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.867388] Console: switching to colour frame buffer device 128x48 [ 0.890575] fbsplash: console 0 using theme 'sabayon' [ 1.077262] fbsplash: switched splash state to 'on' on console 0 [ 1.077627] fb0: VESA VGA frame buffer device [ 1.077675] ACPI: Power Button (FF) [PWRF] [ 1.077691] ACPI: Power Button (CM) [VBTN] [ 1.077766] Using specific hotkey driver [ 1.102894] ibm_acpi: ec object not found [ 1.102916] isapnp: Scanning for PnP cards... [ 1.415458] isapnp: No Plug & Play device found [ 1.415463] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 1.415596] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.416329] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.416522] parport: PnPBIOS parport detected. [ 1.416569] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 1.423969] parport0: Legacy device [ 1.424065] lp0: using parport0 (interrupt-driven). [ 1.424251] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1 [ 1.424254] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 1.426488] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.426655] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.426668] parport0: cannot grant exclusive access for device parkbd [ 1.426823] mice: PS/2 mouse device common for all mice [ 1.426827] ts: Compaq touchscreen protocol output [ 1.426948] Floppy drive(s): fd0 is 1.44M [ 1.439938] FDC 0 is a post-1991 82077 [ 1.441564] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [ 1.441920] loop: loaded (max 8 devices) [ 1.441923] Compaq SMART2 Driver (v 2.6.0) [ 1.441969] HP CISS Driver (v 3.6.10) [ 1.442133] v2.3 : Micro Memory(tm) PCI memory board block driver [ 1.442178] MM: desc_per_page = 128 [ 1.612649] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.613321] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.613326] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.613370] ICH5: IDE controller at PCI slot 0000:00:1f.1 [ 1.613383] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169 [ 1.613393] ICH5: chipset revision 2 [ 1.613395] ICH5: not 100% native mode: will probe irqs later [ 1.613405] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio [ 1.613420] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA [ 1.613430] Probing IDE interface ide0... [ 1.877690] hda: Maxtor 6L100P0, ATA DISK drive [ 2.491599] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.491661] Probing IDE interface ide1... [ 2.857930] hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive [ 3.265614] hdd: CD-RW IDE5232, ATAPI CD/DVD-ROM drive [ 3.323638] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.325124] hda: max request size: 128KiB [ 3.346054] hda: 195813072 sectors (100256 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 3.347602] hda: cache flushes supported [ 3.347638] hda: hda1 hda2 [ 3.357392] hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33) [ 3.357402] Uniform CD-ROM driver Revision: 3.20 [ 3.371443] hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 3.372890] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 3.372893] Detecting Adaptec I2O RAID controllers... [ 3.373240] Adaptec aacraid driver (1.1-5[2409]-mh2) [ 3.373591] NCR53c406a: no available ports found [ 3.373595] sym53c416.c: Version 1.0.0-ac [ 3.373618] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver [ 3.373712] Emulex LightPulse Fibre Channel SCSI driver 8.1.9 [ 3.373715] Copyright(c) 2004-2006 Emulex. All rights reserved. [ 3.396375] Failed initialization of WD-7000 SCSI card! [ 3.396497] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 3.396501] megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) [ 3.396542] megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006 [ 3.396635] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 3.396750] GDT-HA: Found 0 PCI Storage RAID Controllers [ 3.396824] 3ware Storage Controller device driver for Linux v1.26.02.001. [ 3.396865] 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. [ 3.396907] nsp32: loading... [ 3.396948] ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006) [ 3.397030] libata version 2.00 loaded. [ 3.397154] ata_piix 0000:00:1f.2: version 2.00 [ 3.397158] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 3.397174] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169 [ 3.397186] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.397224] ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 169 [ 3.397257] ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 169 [ 3.397272] scsi2 : ata_piix [ 10.433965] ata1: port is slow to respond, please be patient [ 33.421169] ata1: port failed to respond (30 secs) [ 33.572052] ata1: SRST failed (status 0xFF) [ 33.572056] ata1: SRST failed (err_mask=0x100) [ 33.572059] ata1: softreset failed, retrying in 5 secs [ 38.720075] ata1: SRST failed (status 0xFF) [ 38.720079] ata1: SRST failed (err_mask=0x100) [ 38.720081] ata1: softreset failed, retrying in 5 secs [ 43.868095] ata1: SRST failed (status 0xFF) [ 43.868099] ata1: SRST failed (err_mask=0x100) [ 43.868101] ata1: reset failed, giving up [ 43.868110] scsi3 : ata_piix [ 50.914683] ata2: port is slow to respond, please be patient [ 73.850925] ata2: port failed to respond (30 secs) [ 74.002808] ata2: SRST failed (status 0xFF) [ 74.002811] ata2: SRST failed (err_mask=0x100) [ 74.002814] ata2: softreset failed, retrying in 5 secs [ 79.150829] ata2: SRST failed (status 0xFF) [ 79.150833] ata2: SRST failed (err_mask=0x100) [ 79.150836] ata2: softreset failed, retrying in 5 secs [ 84.298851] ata2: SRST failed (status 0xFF) [ 84.298855] ata2: SRST failed (err_mask=0x100) [ 84.298857] ata2: reset failed, giving up [ 84.299380] RocketRAID 3xxx SATA Controller driver v1.0 (060426) [ 84.299424] st: Version 20050830, fixed bufsize 32768, s/g segs 256 [ 84.299477] osst :I: Tape driver with OnStream support version 0.99.4 [ 84.299479] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 84.299608] I2O subsystem v1.325 [ 84.299611] i2o: max drivers = 8 [ 84.299736] I2O Configuration OSM v1.323 [ 84.299809] I2O Bus Adapter OSM v1.317 [ 84.299842] I2O Block Device OSM v1.325 [ 84.299936] I2O SCSI Peripheral OSM v1.316 [ 84.299969] I2O ProcFS OSM v1.316 [ 84.300004] Fusion MPT base driver 3.04.01 [ 84.300007] Copyright (c) 1999-2005 LSI Logic Corporation [ 84.300011] Fusion MPT SPI Host driver 3.04.01 [ 84.300057] Fusion MPT FC Host driver 3.04.01 [ 84.300104] Fusion MPT SAS Host driver 3.04.01 [ 84.300152] Fusion MPT misc device (ioctl) driver 3.04.01 [ 84.300190] mptctl: Registered with Fusion MPT base driver [ 84.300193] mptctl: /dev/mptctl @ (major,minor=10,220) [ 84.300196] Fusion MPT LAN driver 3.04.01 [ 84.300209] ieee1394: Initialized config rom entry `ip1394' [ 84.300318] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 177 [ 84.300324] PCI: VIA IRQ fixup for 0000:02:01.0, from 5 to 1 [ 84.353594] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[fbffe800-fbffefff] Max Packet=[2048] IR/IT contexts=[4/8] [ 84.361676] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 84.361679] ieee1394: sbp2: Try serialize_io=0 for better performance [ 84.361732] usbmon: debugfs is not available [ 84.361766] usbcore: registered new driver usblp [ 84.361770] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 84.361772] Initializing USB Mass Storage driver... [ 84.361808] usbcore: registered new driver usb-storage [ 84.361811] USB Mass Storage support registered. [ 84.361843] usbcore: registered new driver libusual [ 84.361875] usbcore: registered new driver hiddev [ 84.361907] usbcore: registered new driver usbhid [ 84.361910] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 84.361929] md: linear personality registered for level -1 [ 84.361931] md: raid0 personality registered for level 0 [ 84.361934] md: raid1 personality registered for level 1 [ 84.361936] md: raid10 personality registered for level 10 [ 84.378569] raid6: int32x1 789 MB/s [ 84.395545] raid6: int32x2 796 MB/s [ 84.412562] raid6: int32x4 667 MB/s [ 84.429569] raid6: int32x8 523 MB/s [ 84.446514] raid6: mmxx1 1804 MB/s [ 84.463502] raid6: mmxx2 1855 MB/s [ 84.480473] raid6: sse1x1 1078 MB/s [ 84.497470] raid6: sse1x2 1183 MB/s [ 84.514466] raid6: sse2x1 2210 MB/s [ 84.531449] raid6: sse2x2 1855 MB/s [ 84.531452] raid6: using algorithm sse2x1 (2210 MB/s) [ 84.531455] md: raid6 personality registered for level 6 [ 84.531457] md: raid5 personality registered for level 5 [ 84.531459] md: raid4 personality registered for level 4 [ 84.531462] raid5: automatically using best checksumming function: pIII_sse [ 84.536427] pIII_sse : 4780.000 MB/sec [ 84.536430] raid5: using function: pIII_sse (4780.000 MB/sec) [ 84.536433] md: multipath personality registered for level -4 [ 84.536436] md: faulty personality registered for level -5 [ 84.536439] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 84.536441] md: bitmap version 4.39 [ 84.536558] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com [ 84.536826] EISA: Probing bus 0 at eisa.0 [ 84.536902] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). [ 84.537032] specify port [ 84.537037] snd_cs4231: probe of snd_cs4231.0 failed with error -22 [ 84.537602] ALSA device list: [ 84.537605] No soundcards found. [ 84.537695] TCP bic registered [ 84.537707] NET: Registered protocol family 1 [ 84.537714] NET: Registered protocol family 17 [ 84.537881] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available [ 84.537888] Starting balanced_irq [ 84.537897] Using IPI No-Shortcut mode [ 84.537991] ACPI: (supports S0 S1 S3 S4 S5) [ 84.538024] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 84.538428] Time: tsc clocksource has been installed. [ 84.538432] Freeing unused kernel memory: 476k freed [ 84.796782] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185 [ 84.796802] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 84.796806] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 84.796879] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 84.796915] ehci_hcd 0000:00:1d.7: debug port 1 [ 84.796922] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 84.796934] ehci_hcd 0000:00:1d.7: irq 185, io mem 0xffa80800 [ 84.800814] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 84.800963] usb usb1: configuration #1 chosen from 1 choice [ 84.801016] hub 1-0:1.0: USB hub found [ 84.801026] hub 1-0:1.0: 8 ports detected [ 84.938808] USB Universal Host Controller Interface driver v3.0 [ 84.938911] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193 [ 84.938924] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 84.938929] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 84.938987] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 84.939014] uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000ff80 [ 84.939181] usb usb2: configuration #1 chosen from 1 choice [ 84.939237] hub 2-0:1.0: USB hub found [ 84.939247] hub 2-0:1.0: 2 ports detected [ 85.040395] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201 [ 85.040404] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 85.040408] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 85.040454] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 85.040477] uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000ff60 [ 85.040622] usb usb3: configuration #1 chosen from 1 choice [ 85.040673] hub 3-0:1.0: USB hub found [ 85.040686] hub 3-0:1.0: 2 ports detected [ 85.141311] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169 [ 85.141320] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 85.141323] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 85.141371] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 85.141391] uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000ff40 [ 85.141540] usb usb4: configuration #1 chosen from 1 choice [ 85.141588] hub 4-0:1.0: USB hub found [ 85.141596] hub 4-0:1.0: 2 ports detected [ 85.242234] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 193 [ 85.242243] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 85.242247] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 85.242293] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 85.242313] uhci_hcd 0000:00:1d.3: irq 193, io base 0x0000ff20 [ 85.242462] usb usb5: configuration #1 chosen from 1 choice [ 85.242510] hub 5-0:1.0: USB hub found [ 85.242517] hub 5-0:1.0: 2 ports detected [ 85.370276] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 85.398489] sl811: driver sl811-hcd, 19 May 2005 [ 85.526000] Registering unionfs 20060916-2203 [ 85.526006] unionfs: debugging is not enabled [ 85.559294] Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 [ 85.559300] Copyright (c) 1999-2006 Intel Corporation. [ 85.571883] usb 1-4: new high speed USB device using ehci_hcd and address 5 [ 85.618931] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011066645556252] [ 85.633721] ieee1394: Node added: ID:BUS[0-01:1023] GUID[0016b5fffe0443fb] [ 85.686705] usb 1-4: configuration #1 chosen from 1 choice [ 85.686933] scsi4 : SCSI emulation for USB Mass Storage devices [ 85.687044] usb-storage: device found at 5 [ 85.687048] usb-storage: waiting for device to settle before scanning [ 85.892623] usb 1-6: new high speed USB device using ehci_hcd and address 6 [ 86.104141] usb 1-6: configuration #1 chosen from 1 choice [ 86.104369] scsi5 : SCSI emulation for USB Mass Storage devices [ 86.104471] usb-storage: device found at 6 [ 86.104475] usb-storage: waiting for device to settle before scanning [ 86.310299] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 86.479052] usb 2-1: configuration #1 chosen from 1 choice [ 86.486993] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 3 vid 0x03F0 pid 0x0211 [ 86.693006] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 86.866939] kjournald starting. Commit interval 5 seconds [ 86.866949] EXT3-fs: dm-0: orphan cleanup on readonly fs [ 86.869872] usb 2-2: configuration #1 chosen from 1 choice [ 86.895002] ext3_orphan_cleanup: deleting unreferenced inode 11821222 [ 86.895031] EXT3-fs: dm-0: 1 orphan inode deleted [ 86.895033] EXT3-fs: recovery complete. [ 86.902073] EXT3-fs: mounted filesystem with ordered data mode. [ 87.079718] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 87.290483] usb 3-1: configuration #1 chosen from 1 choice [ 87.321097] input: Microsoft Corporation Microsoft Laser Mouse 6000 as /class/input/input1 [ 87.321276] input: USB HID v1.11 Mouse [Microsoft Corporation Microsoft Laser Mouse 6000] on usb-0000:00:1d.1-1 [ 90.222971] Linux video capture interface: v2.00 [ 90.264457] drivers/media/video/usbvideo/quickcam_messenger.c: Logitech Quickcam Messenger USB v0.01 [ 90.321214] videodev: "QCM USB Camera" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ [ 90.321223] drivers/media/video/usbvideo/usbvideo.c: QCM on /dev/video0: canvas=320x240 videosize=320x240 [ 90.321315] input: QCM button as /class/input/input2 [ 90.321365] usbcore: registered new driver QCM [ 90.349572] usbcore: registered new driver snd-usb-audio [ 90.684939] Vendor: WDC Model: WD2500JB-00GVA0 Rev: 08.0 [ 90.684965] Type: Direct-Access ANSI SCSI revision: 02 [ 90.686925] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 90.687868] sda: Write Protect is off [ 90.687873] sda: Mode Sense: 53 00 00 08 [ 90.687876] sda: assuming drive cache: write through [ 90.688922] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 90.689867] sda: Write Protect is off [ 90.689871] sda: Mode Sense: 53 00 00 08 [ 90.689875] sda: assuming drive cache: write through [ 90.689879] sda: sda1 [ 90.710004] sd 4:0:0:0: Attached scsi disk sda [ 90.710065] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 90.714102] usb-storage: device scan complete [ 91.102616] Vendor: SONY Model: DVD RW DRU-800A Rev: KY01 [ 91.102642] Type: CD-ROM ANSI SCSI revision: 00 [ 91.114594] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 91.114662] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 91.114728] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 91.118609] usb-storage: device scan complete [ 100.221912] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 209 [ 100.236083] Linux agpgart interface v0.101 (c) Dave Jones [ 100.391073] nvidia: module license 'NVIDIA' taints kernel. [ 100.646236] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 [ 100.646469] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9629 Wed Nov 1 19:30:07 PST 2006 [ 101.005769] e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI [ 101.005774] e100: Copyright(c) 1999-2005 Intel Corporation [ 101.009663] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 217 [ 101.441035] input: PC Speaker as /class/input/input3 [ 101.765235] e100: eth0: e100_probe: addr 0xfbfff000, irq 217, MAC addr 00:0C:F1:D6:BC:64 [ 101.814196] agpgart: Detected an Intel i875 Chipset. [ 101.849322] agpgart: AGP aperture is 128M @ 0xd0000000 [ 102.440648] eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html [ 102.440652] eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others [ 102.483593] ivtv: ==================== START INIT IVTV ==================== [ 102.483598] ivtv: version 0.8.1 (tagged release) loading [ 102.483602] ivtv: Linux version: 2.6.18-gentoo-r4 SMP mod_unload 586 REGPARM gcc-4.1 [ 102.483606] ivtv: In case of problems please include the debug info between [ 102.483610] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 102.483614] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 102.491058] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 102.491196] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 225 [ 103.286121] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [ 103.562096] tveeprom 1-0050: Hauppauge model 26032, rev C599, serial# 8383553 [ 103.562102] tveeprom 1-0050: tuner model is TCL 2002N 5H (idx 99, type 50) [ 103.562108] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) [ 103.562112] tveeprom 1-0050: audio processor is CX25841 (idx 35) [ 103.562117] tveeprom 1-0050: decoder processor is CX25841 (idx 28) [ 103.562121] tveeprom 1-0050: has no radio, has IR remote [ 103.562126] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 103.562129] ivtv0: reopen i2c bus for IR-blaster support [ 103.654981] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 103.821719] cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) [ 105.016826] i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayout=0) [ 107.988150] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 108.083674] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 108.150454] ivtv0: Encoder revision: 0x02050032 [ 108.150508] ivtv0: Registered device video1 for encoder MPEG [ 108.150781] ivtv0: Registered device video32 for encoder YUV [ 108.151110] ivtv0: Registered device vbi0 for encoder VBI [ 108.151339] ivtv0: Registered device video24 for encoder PCM audio [ 108.152050] tuner 1-0061: type set to 50 (TCL 2002N) [ 108.775934] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 [ 108.775979] ivtv: ==================== END INIT IVTV ==================== [ 108.776012] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 201 [ 108.779770] Audigy2 value: Special config. [ 109.420779] ieee1394: raw1394: /dev/raw1394 device initialized [ 119.887189] EXT3 FS on dm-0, internal journal [ 120.714895] kjournald starting. Commit interval 5 seconds [ 120.714976] EXT3 FS on hda1, internal journal [ 120.714982] EXT3-fs: mounted filesystem with ordered data mode. [ 121.022046] Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k [ 139.770180] fbsplash: console 1 using theme 'sabayon' [ 139.785015] fbsplash: switched splash state to 'on' on console 1 [ 139.817349] fbsplash: console 2 using theme 'sabayon' [ 139.825458] fbsplash: switched splash state to 'on' on console 2 [ 139.897535] fbsplash: console 3 using theme 'sabayon' [ 139.918618] fbsplash: switched splash state to 'on' on console 3 [ 139.935985] fbsplash: console 4 using theme 'sabayon' [ 139.971481] fbsplash: switched splash state to 'on' on console 4 [ 140.006355] fbsplash: console 5 using theme 'sabayon' [ 140.014487] fbsplash: switched splash state to 'on' on console 5 [ 140.022841] fbsplash: console 11 using theme 'sabayon' [ 140.072714] fbsplash: switched splash state to 'on' on console 11 [ 142.318350] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 142.318507] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 142.318599] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 154.422766] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 295.953273] usbcore: deregistering driver snd-usb-audio [ 320.574275] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 201 [ 320.577402] Audigy2 value: Special config.