Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet) Linux version 2.6.9-42.ELsmp (buildcentos@mehak.karan.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Tue Aug 15 10:35:26 BST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bff80000 (usable) BIOS-e820: 00000000bff80000 - 00000000bff8e000 (ACPI data) BIOS-e820: 00000000bff8e000 - 00000000bffe0000 (ACPI NVS) BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa4e0 ACPI: RSDT (v001 A M I OEMRSDT 0x08000601 MSFT 0x00000097) @ 0x00000000bff80000 ACPI: FADT (v001 A M I OEMFACP 0x08000601 MSFT 0x00000097) @ 0x00000000bff80200 ACPI: MADT (v001 A M I OEMAPIC 0x08000601 MSFT 0x00000097) @ 0x00000000bff80390 ACPI: OEMB (v001 A M I AMI_OEM 0x08000601 MSFT 0x00000097) @ 0x00000000bff8e040 ACPI: MCFG (v001 A M I OEMMCFG 0x08000601 MSFT 0x00000097) @ 0x00000000bff889c0 ACPI: DSDT (v001 A0590 A0590001 0x00000001 INTL 0x02002026) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-0000000140000000 Bootmem setup node 0 0000000000000000-0000000140000000 No mptable found. On node 0 totalpages: 1310720 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 1306624 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) Setting APIC routing to flat ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c4000000 (gap: c0000000:3fb00000) Checking aperture... Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet console=tty0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2404.169 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Placing software IO TLB between 0x1ca5000 - 0x5ca5000 Memory: 4036572k/5242880k available (2105k kernel code, 0k reserved, 1297k data, 196k init) Calibrating delay using timer specific routine.. 4812.64 BogoMIPS (lpj=2406321) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K using mwait in idle threads. CPU0: Physical Processor ID: 0 CPU0: Processor Core ID: 0 CPU0: Initial APIC ID: 0 Using IO APIC NMI watchdog CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU0: Physical Processor ID: 0 CPU0: Processor Core ID: 0 CPU0: Initial APIC ID: 0 CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 per-CPU timeslice cutoff: 521.67 usecs. task migration cache decay timeout: 1 msecs. Booting processor 1/1 rip 6000 rsp 10005d75f58 Initializing CPU#1 Calibrating delay using timer specific routine.. 4807.54 BogoMIPS (lpj=2403774) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU1: Physical Processor ID: 0 CPU1: Processor Core ID: 1 CPU1: Initial APIC ID: 1 Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Total of 2 processors activated (9620.19 BogoMIPS). activating NMI Watchdog ... done. testing NMI watchdog ... OK. Using local APIC timer interrupts. Detected 16.695 MHz APIC timer. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs time.c: Using PIT/TSC based timekeeping. checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 PCI: Using MMCONFIG at f0000000 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 185 GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 193 GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 185 GSI 21 sharing vector 0xD1 and IRQ 21 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 209 GSI 22 sharing vector 0xD9 and IRQ 22 ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 217 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 217 ACPI: PCI interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:08:0e.0[A] -> GSI 18 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 GSI 23 sharing vector 0xE1 and IRQ 23 ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 225 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1164719296.468:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 40E182233A4BCA05 - User ID: CentOS (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU1] (supports C1, 8 throttling states) ACPI: Processor [CPU2] (supports C1, 8 throttling states) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 209 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 262144 (order: 10, 4194304 bytes) TCP: Hash tables configured (established 262144 bind 262144) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S3 S4 S5) ACPI wakeup devices: P0P1 P0P3 P0P5 P0P6 P0P7 P0P8 P0P9 UAR1 USB2 USB3 USB4 MC97 USB1 EUSB P0P4 Freeing unused kernel memory: 196k freed SCSI subsystem initialized libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xD880 irq 217 ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 217 ata1: dev 0 cfg 49:2f00 82:346b 83:7fe9 84:4773 85:3469 86:be01 87:4763 88:207f ata1: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ata2: SATA port has no device. scsi1 : ata_piix isa bounce pool size: 16 pages Vendor: ATA Model: Hitachi HDT72504 Rev: V5CO Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) SCSI device sda: drive cache: write back SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 4 roles, 355 types, 26 bools security: 55 classes, 22582 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts inserting floppy driver for 2.6.9-42.ELsmp floppy0: no floppy controllers found ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v1.1 addr 0xff7fc000 irq 169 Yukon-EC (0xb6) rev 2 divert: allocating divert_blk for eth0 sky2 eth0: addr 00:18:f3:58:2c:88 MSI INIT SUCCESS ACPI: PCI interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1b.0 to 64 Evaluate _OSC Set fails. Status = 0x0005 pciehp: Both _OSC and OSHP methods do not exist Evaluate _OSC Set fails. Status = 0x0005 pciehp: Both _OSC and OSHP methods do not exist Evaluate _OSC Set fails. Status = 0x0005 pciehp: Both _OSC and OSHP methods do not exist hw_random: RNG not detected ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 185 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 185, pci mem ffffff000006ec00 SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 185 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 185, io base 000000000000e480 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 193 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 193, io base 000000000000e800 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 201, io base 000000000000e880 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 177 uhci_hcd 0000:00:1d.3: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: irq 177, io base 000000000000ec00 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 1-4: new high speed USB device using address 4 hub 1-4:1.0: USB hub found hub 1-4:1.0: 3 ports detected SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts usb 2-2: new full speed USB device using address 2 input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2 input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2 usb 3-1: new low speed USB device using address 2 NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff80405540(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 input: USB HID v1.11 Keyboard [Microsoft Natural� Ergonomic Keyboard 4000] on usb-0000:00:1d.1-1 input: USB HID v1.11 Device [Microsoft Natural� Ergonomic Keyboard 4000] on usb-0000:00:1d.1-1 usb 1-4.1: new high speed USB device using address 5 hub 1-4.1:1.0: USB hub found hub 1-4.1:1.0: 3 ports detected usb 1-4.1.1: new high speed USB device using address 6 Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices Vendor: Generic Model: Flash HS-CF Rev: 4.49 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0 USB Mass Storage device found at 6 usbcore: registered new driver usb-storage USB Mass Storage support registered. fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 3780 MBytes. [fglrx] module loaded - fglrx 8.31.5 [Nov 9 2006] on minor 0 ACPI: PCI interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 169 mtrr: type mismatch for dffc0000,20000 old: uncachable new: write-combining mtrr: type mismatch for dff80000,40000 old: uncachable new: write-combining mtrr: type mismatch for dff00000,80000 old: uncachable new: write-combining mtrr: type mismatch for dfe00000,100000 old: uncachable new: write-combining mtrr: type mismatch for dfc00000,200000 old: uncachable new: write-combining mtrr: type mismatch for df800000,400000 old: uncachable new: write-combining mtrr: type mismatch for df000000,800000 old: uncachable new: write-combining mtrr: type mismatch for de000000,1000000 old: uncachable new: write-combining mtrr: type mismatch for dc000000,2000000 old: uncachable new: write-combining mtrr: type mismatch for d8000000,4000000 old: uncachable new: write-combining mtrr: type mismatch for d0000000,8000000 old: uncachable new: write-combining drivers/usb/input/hid-input.c: event field not found drivers/usb/input/hid-input.c: event field not found drivers/usb/input/hid-input.c: event field not found drivers/usb/input/hid-input.c: event field not found ACPI: Power Button (FF) [PWRF] EXT3 FS on dm-0, internal journal cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14 microcode: No new microdata for cpu 1 microcode: No new microdata for cpu 0 IA-32 Microcode Update Driver v1.14 unregistered parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected Device not ready. Make sure there is a disc in the drive. Device not ready. Make sure there is a disc in the drive. ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8192 buckets, 65536 max) - 456 bytes per conntrack Linux Kernel Card Services options: [pci] [cardbus] [pm] sky2 eth0: enabling interface sky2 eth0: Link is up at 100 Mbps, full duplex, flow control none SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts i2c /dev entries driver eth0: no IPv6 routers present parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready Device not ready. Make sure there is a disc in the drive. Device not ready. Make sure there is a disc in the drive. ACPI: PCI interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 169 mtrr: type mismatch for d0000000,10000000 old: uncachable new: write-combining [fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22) [fglrx] total GART = 134217728 [fglrx] free GART = 118226944 [fglrx] max single GART = 118226944 [fglrx] total LFB = 249819136 [fglrx] free LFB = 217051136 [fglrx] max single LFB = 217051136 [fglrx] total Inv = 268435456 [fglrx] free Inv = 268435456 [fglrx] max single Inv = 268435456 [fglrx] total TIM = 0 mtrr: type mismatch for d11a0000,1000 old: uncachable new: write-combining mtrr: type mismatch for d1180000,20000 old: uncachable new: write-combining mtrr: type mismatch for d1100000,80000 old: uncachable new: write-combining mtrr: type mismatch for d1000000,100000 old: uncachable new: write-combining mtrr: type mismatch for d0000000,1000000 old: uncachable new: write-combining loop: loaded (max 8 devices) usb 1-4: USB disconnect, address 4 usb 1-4.1: USB disconnect, address 5 usb 1-4.1.1: USB disconnect, address 6 usb 1-4: new high speed USB device using address 7 hub 1-4:1.0: USB hub found hub 1-4:1.0: 3 ports detected usb 1-4.1: new high speed USB device using address 8 hub 1-4.1:1.0: USB hub found hub 1-4.1:1.0: 3 ports detected usb 1-4.1.1: new high speed USB device using address 9 scsi3 : SCSI emulation for USB Mass Storage devices Vendor: Generic Model: Flash HS-CF Rev: 4.49 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdb at scsi3, channel 0, id 0, lun 0 USB Mass Storage device found at 9 Device not ready. Make sure there is a disc in the drive. Device not ready. Make sure there is a disc in the drive. usb 1-4: USB disconnect, address 7 usb 1-4.1: USB disconnect, address 8 usb 1-4.1.1: USB disconnect, address 9 usb 1-4: new high speed USB device using address 10 hub 1-4:1.0: USB hub found hub 1-4:1.0: 3 ports detected usb 1-4.1: new high speed USB device using address 11 hub 1-4.1:1.0: USB hub found hub 1-4.1:1.0: 3 ports detected usb 1-4.1.1: new high speed USB device using address 12 scsi4 : SCSI emulation for USB Mass Storage devices Vendor: Generic Model: Flash HS-CF Rev: 4.49 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdb at scsi4, channel 0, id 0, lun 0 USB Mass Storage device found at 12 Device not ready. Make sure there is a disc in the drive. Device not ready. Make sure there is a disc in the drive.