adil@provision:~$ lspci
0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Graphics Port (rev 03)
0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
0000:00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (re v 01)
0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0398 (rev a1)
0000:06:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02)
0000:08:06.0 CardBus bridge: Texas Instruments: Unknown device 8039
0000:08:06.1 FireWire (IEEE 1394): Texas Instruments: Unknown device 803a
0000:08:06.2 Mass storage controller: Texas Instruments: Unknown device 803b
0000:08:06.3 0805: Texas Instruments: Unknown device 803c
0000:08:08.0 Ethernet controller: Intel Corporation: Unknown device 1092 (rev 01)

[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
[17179569.184000]  BIOS-e820: 000000007fe80000 - 000000007ff00000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[17179569.184000] 1150MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f65b0
[17179569.184000] On node 0 totalpages: 523904
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 294528 pages, LIFO batch:31
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6580
[17179569.184000] ACPI: RSDT (v001 PTLTD  Capell00 0x06040000  LTP 0x00000000) @ 0x7fe8b3a7
[17179569.184000] ACPI: FADT (v001 HP     NISSAN   0x06040000 LOHR 0x0000005a) @ 0x7fe92dee
[17179569.184000] ACPI: MADT (v001 HP     NISSAN   0x06040000 LOHR 0x0000005a) @ 0x7fe92e62
[17179569.184000] ACPI: HPET (v001 HP     NISSAN   0x06040000 LOHR 0x0000005a) @ 0x7fe92eca
[17179569.184000] ACPI: MCFG (v001 HP     NISSAN   0x06040000 LOHR 0x0000005a) @ 0x7fe92f02
[17179569.184000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x7fe92fd8
[17179569.184000] ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x7fe92f70
[17179569.184000] ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20060217) @ 0x7fe8c451
[17179569.184000] ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20060217) @ 0x7fe8bdbf
[17179569.184000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20060217) @ 0x7fe8b3ef
[17179569.184000] ACPI: DSDT (v001 HP     NISSAN   0x06040000 INTL 0x20060217) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: 2 duplicate APIC table ignored.
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 6:14 APIC version 20
[17179569.184000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1 already used, trying 2
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda5 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Console: colour VGA+ 80x25
[17179569.184000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.184000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.184000] Memory: 2067160k/2095616k available (1976k kernel code, 27132k reserved, 606k data, 288k init, 1178112k highmem)
[17179569.184000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.184000] hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
[17179569.184000] hpet0: 3 64-bit timers, 14318180 Hz
[17179569.184000] Using HPET for base-timer
[17179569.184000] Using HPET for gettimeofday
[17179569.184000] Detected 1995.017 MHz processor.
[17179569.184000] Using hpet for high-res timesource
[17179569.268000] Calibrating delay using timer specific routine.. 3995.18 BogoMIPS (lpj=7990366)
[17179569.268000] Security Framework v1.0.0 initialized
[17179569.268000] SELinux:  Disabled at boot.
[17179569.268000] Mount-cache hash table entries: 512
[17179569.268000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179569.268000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179569.268000] monitor/mwait feature present.
[17179569.268000] using mwait in idle threads.
[17179569.268000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179569.268000] CPU: L2 cache: 2048K
[17179569.268000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000
[17179569.268000] mtrr: v2.0 (20020519)
[17179569.268000] CPU: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
[17179569.268000] Enabling fast FPU save and restore... done.
[17179569.268000] Enabling unmasked SIMD FPU exception support... done.
[17179569.268000] Checking 'hlt' instruction... OK.
[17179569.284000] checking if image is initramfs... it is
[17179570.328000] Freeing initrd memory: 6616k freed
[17179570.332000] ACPI: Looking for DSDT ... not found!
[17179570.340000] ENABLING IO-APIC IRQs
[17179570.340000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.492000] NET: Registered protocol family 16
[17179570.492000] EISA bus registered
[17179570.492000] ACPI: bus type pci registered
[17179570.492000] PCI: PCI BIOS revision 2.10 entry at 0xfd873, last bus=9
[17179570.492000] PCI: Using MMCONFIG
[17179570.492000] ACPI: Subsystem revision 20051216
[17179570.496000] ACPI: Interpreter enabled
[17179570.496000] ACPI: Using IOAPIC for interrupt routing
[17179570.496000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.496000] PCI: Probing PCI hardware (bus 00)
[17179570.516000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[17179570.516000] Boot video device is 0000:01:00.0
[17179570.516000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.516000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.520000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[17179570.524000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[17179570.524000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[17179570.524000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[17179570.524000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[17179570.524000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[17179570.524000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[17179570.524000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[17179570.524000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[17179570.524000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 *6 7 10 12 14 15)
[17179570.528000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[17179570.528000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[17179570.528000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[17179570.528000] ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
[17179570.572000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.572000] pnp: PnP ACPI init
[17179570.596000] pnp: PnP ACPI: found 10 devices
[17179570.596000] PnPBIOS: Disabled by ACPI PNP
[17179570.596000] PCI: Using ACPI for IRQ routing
[17179570.596000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.596000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[17179570.596000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[17179570.596000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[17179570.596000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[17179570.596000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[17179570.596000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[17179570.596000] PCI: Cannot allocate resource region 0 of device 0000:06:00.0
[17179570.628000] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[17179570.628000] PCI: Bridge: 0000:00:01.0
[17179570.628000]   IO window: 2000-2fff
[17179570.628000]   MEM window: d0000000-d1ffffff
[17179570.628000]   PREFETCH window: c0000000-cfffffff
[17179570.628000] PCI: Bridge: 0000:00:1c.0
[17179570.628000]   IO window: disabled.
[17179570.628000]   MEM window: disabled.
[17179570.628000]   PREFETCH window: disabled.
[17179570.628000] PCI: Bridge: 0000:00:1c.1
[17179570.628000]   IO window: disabled.
[17179570.628000]   MEM window: disabled.
[17179570.628000]   PREFETCH window: disabled.
[17179570.628000] PCI: Bridge: 0000:00:1c.2
[17179570.628000]   IO window: disabled.
[17179570.628000]   MEM window: 8a000000-8a0fffff
[17179570.628000]   PREFETCH window: disabled.
[17179570.628000] PCI: Bus 9, cardbus bridge: 0000:08:06.0
[17179570.628000]   IO window: 00003400-000034ff
[17179570.628000]   IO window: 00003800-000038ff
[17179570.628000]   PREFETCH window: 88000000-89ffffff
[17179570.628000]   MEM window: 8c000000-8dffffff
[17179570.628000] PCI: Bridge: 0000:00:1e.0
[17179570.628000]   IO window: 3000-3fff
[17179570.628000]   MEM window: d2000000-d20fffff
[17179570.628000]   PREFETCH window: 88000000-89ffffff
[17179570.628000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.628000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.628000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179570.628000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.628000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
[17179570.628000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179570.628000] PCI: Enabling device 0000:00:1c.2 (0100 -> 0102)
[17179570.628000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179570.628000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179570.628000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.628000] ACPI: PCI Interrupt 0000:08:06.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179570.628000] Simple Boot Flag at 0x36 set to 0x1
[17179570.628000] audit: initializing netlink socket (disabled)
[17179570.628000] audit(1165055316.628:1): initialized
[17179570.628000] highmem bounce pool size: 64 pages
[17179570.628000] VFS: Disk quotas dquot_6.5.1
[17179570.628000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.628000] Initializing Cryptographic API
[17179570.628000] io scheduler noop registered
[17179570.628000] io scheduler anticipatory registered
[17179570.628000] io scheduler deadline registered
[17179570.628000] io scheduler cfq registered
[17179578.628000] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[17179578.628000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179578.628000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179578.628000] assign_interrupt_mode Found MSI capability
[17179578.628000] Allocate Port Service[pcie00]
[17179578.628000] Allocate Port Service[pcie03]
[17179578.628000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179578.628000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179578.628000] assign_interrupt_mode Found MSI capability
[17179578.628000] Allocate Port Service[pcie00]
[17179578.628000] Allocate Port Service[pcie02]
[17179578.628000] Allocate Port Service[pcie03]
[17179578.628000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
[17179578.628000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179578.628000] assign_interrupt_mode Found MSI capability
[17179578.628000] Allocate Port Service[pcie00]
[17179578.628000] Allocate Port Service[pcie02]
[17179578.628000] Allocate Port Service[pcie03]
[17179578.628000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179578.628000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179578.628000] assign_interrupt_mode Found MSI capability
[17179578.628000] Allocate Port Service[pcie00]
[17179578.628000] Allocate Port Service[pcie02]
[17179578.628000] Allocate Port Service[pcie03]
[17179578.628000] isapnp: Scanning for PnP cards...
[17179578.984000] isapnp: No Plug & Play device found
[17179579.004000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179579.020000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179579.036000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179579.036000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179579.040000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179579.040000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179579.044000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179579.044000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179579.048000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179579.048000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179579.048000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179579.048000] mice: PS/2 mouse device common for all mice
[17179579.052000] EISA: Probing bus 0 at eisa.0
[17179579.052000] Cannot allocate resource for EISA slot 1
[17179579.052000] Cannot allocate resource for EISA slot 2
[17179579.052000] Cannot allocate resource for EISA slot 3
[17179579.052000] EISA: Detected 0 cards.
[17179579.052000] NET: Registered protocol family 2
[17179579.092000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179579.092000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179579.092000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179579.092000] TCP: Hash tables configured (established 262144 bind 65536)
[17179579.092000] TCP reno registered
[17179579.092000] TCP bic registered
[17179579.092000] NET: Registered protocol family 1
[17179579.092000] NET: Registered protocol family 8
[17179579.092000] NET: Registered protocol family 20
[17179579.092000] Using IPI Shortcut mode
[17179579.092000] ACPI wakeup devices: 
[17179579.092000] LANC PS2K PS2M 
[17179579.092000] ACPI: (supports S0 S3 S4 S5)
[17179579.092000] Freeing unused kernel memory: 288k freed
[17179579.108000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179579.160000] vga16fb: initializing
[17179579.160000] vga16fb: mapped to 0xc00a0000
[17179579.416000] Console: switching to colour frame buffer device 80x25
[17179579.416000] fb0: VGA16 VGA frame buffer device
[17179580.608000] Capability LSM initialized
[17179580.660000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179580.660000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179580.672000] ACPI: Thermal Zone [TZ01] (31 C)
[17179580.680000] ACPI: Thermal Zone [TZ02] (0 C)
[17179581.388000] SCSI subsystem initialized
[17179581.388000] ACPI: bus type scsi registered
[17179581.388000] libata version 1.20 loaded.
[17179581.392000] ata_piix 0000:00:1f.2: version 1.05
[17179581.392000] ata_pci_init_one: pci_dev class+intf: 0x10180
[17179581.392000] ata_pci_init_one: NO_LEGACY == 0
[17179581.392000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 233
[17179581.392000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179581.392000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
[17179581.556000] ata1: dev 0 cfg 00:0c5a 49:2f00 82:3069 83:7c09 84:6003 85:3069 86:3c09 87:6003 88:203f 93:0000
[17179581.556000] ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48
[17179581.556000] ata_acpi_push_id: skipping for PATA mode
[17179581.556000] ata1: dev 0 configured for UDMA/100
[17179581.556000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179581.556000] pata_get_dev_handle: dev_handle: 0xdffe3840, parent_handle: 0xdffea8e0
[17179581.556000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff73800, *handle=0xdffe3840
[17179581.556000] do_drive_get_GTF:   drive w/ adr=0: v: 0xdffe3460
[17179581.556000] scsi0 : ata_piix
[17179581.556000]   Vendor: ATA       Model: ST98823AS         Rev: 3.05
[17179581.556000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179581.556000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179581.556000] pata_get_dev_handle: dev_handle: 0xdffe3840, parent_handle: 0xdffea8e0
[17179581.556000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff73800, *handle=0xdffe3840
[17179581.556000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
[17179581.876000] ata2: dev 0 cfg 00:85c0 49:0f00 82:421c 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000 93:404f
[17179581.876000] ata2: dev 0 ATAPI, max MWDMA2
[17179581.876000] ata2(0): applying bridge limits
[17179581.876000] ata_acpi_push_id: skipping for PATA mode
[17179581.876000] ata2: dev 0 configured for MWDMA2
[17179581.876000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179581.876000] pata_get_dev_handle: dev_handle: 0xdffe3840, parent_handle: 0xdffea8e0
[17179581.876000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff73800, *handle=0xdffe3840
[17179581.876000] do_drive_get_GTF:   drive w/ adr=0: v: 0xdffe3320
[17179581.876000] scsi1 : ata_piix
[17179581.880000]   Vendor: HL-DT-ST  Model: DVDRAM GSA-4084N  Rev: KQ09
[17179581.880000]   Type:   CD-ROM                             ANSI SCSI revision: 05
[17179581.880000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179581.880000] pata_get_dev_handle: dev_handle: 0xdffe3840, parent_handle: 0xdffea8e0
[17179581.880000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff73800, *handle=0xdffe3840
[17179581.892000] Driver 'sd' needs updating - please use bus_type methods
[17179581.896000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[17179581.900000] SCSI device sda: drive cache: write back
[17179581.904000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[17179581.908000] SCSI device sda: drive cache: write back
[17179581.908000]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[17179581.952000] sd 0:0:0:0: Attached scsi disk sda
[17179582.440000] usbcore: registered new driver usbfs
[17179582.440000] usbcore: registered new driver hub
[17179582.440000] USB Universal Host Controller Interface driver v2.3
[17179582.440000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 50
[17179582.440000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179582.440000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179582.444000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179582.444000] uhci_hcd 0000:00:1d.0: irq 50, io base 0x00001800
[17179582.444000] hub 1-0:1.0: USB hub found
[17179582.444000] hub 1-0:1.0: 2 ports detected
[17179582.548000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
[17179582.548000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179582.548000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179582.548000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179582.548000] uhci_hcd 0000:00:1d.1: irq 233, io base 0x00001820
[17179582.548000] hub 2-0:1.0: USB hub found
[17179582.548000] hub 2-0:1.0: 2 ports detected
[17179582.568000] ieee1394: Initialized config rom entry `ip1394'
[17179582.652000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179582.652000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179582.652000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179582.652000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179582.652000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001840
[17179582.652000] hub 3-0:1.0: USB hub found
[17179582.652000] hub 3-0:1.0: 2 ports detected
[17179582.756000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[17179582.756000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179582.756000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179582.756000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179582.756000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001860
[17179582.756000] hub 4-0:1.0: USB hub found
[17179582.756000] hub 4-0:1.0: 2 ports detected
[17179582.860000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 50
[17179582.860000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179582.860000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179582.860000] ehci_hcd 0000:00:1d.7: debug port 1
[17179582.860000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179582.860000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179582.860000] ehci_hcd 0000:00:1d.7: irq 50, io mem 0xd2404000
[17179582.864000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179582.864000] hub 5-0:1.0: USB hub found
[17179582.864000] hub 5-0:1.0: 8 ports detected
[17179582.968000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[17179582.968000] ACPI: PCI Interrupt 0000:08:06.1[B] -> GSI 19 (level, low) -> IRQ 233
[17179583.016000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[233]  MMIO=[d2007000-d20077ff]  Max Packet=[2048]
[17179583.056000] ide0: I/O resource 0x1F0-0x1F7 not free.
[17179583.056000] ide0: ports already in use, skipping probe
[17179583.056000] ide1: I/O resource 0x170-0x177 not free.
[17179583.056000] ide1: ports already in use, skipping probe
[17179583.084000] Attempting manual resume
[17179583.096000] EXT3-fs: INFO: recovery required on readonly filesystem.
[17179583.096000] EXT3-fs: write access will be enabled during recovery.
[17179583.260000] usb 5-6: new high speed USB device using ehci_hcd and address 2
[17179583.408000] Initializing USB Mass Storage driver...
[17179583.576000] scsi2 : SCSI emulation for USB Mass Storage devices
[17179583.576000] usb-storage: device found at 2
[17179583.576000] usb-storage: waiting for device to settle before scanning
[17179583.576000] usbcore: registered new driver usb-storage
[17179583.576000] USB Mass Storage support registered.
[17179583.944000] usb 4-1: new full speed USB device using uhci_hcd and address 2
[17179584.288000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[663f02003b33407e]
[17179584.716000] EXT3-fs: recovery complete.
[17179584.716000] kjournald starting.  Commit interval 5 seconds
[17179584.724000] EXT3-fs: mounted filesystem with ordered data mode.
[17179588.576000]   Vendor: USB2.0    Model: Mobile Disk       Rev: 1.00
[17179588.576000]   Type:   Direct-Access                      ANSI SCSI revision: 02
[17179588.576000] SCSI device sdb: 1007616 512-byte hdwr sectors (516 MB)
[17179588.576000] sdb: Write Protect is off
[17179588.576000] sdb: Mode Sense: 00 00 00 00
[17179588.576000] sdb: assuming drive cache: write through
[17179588.580000] SCSI device sdb: 1007616 512-byte hdwr sectors (516 MB)
[17179588.580000] sdb: Write Protect is off
[17179588.580000] sdb: Mode Sense: 00 00 00 00
[17179588.580000] sdb: assuming drive cache: write through
[17179588.580000]  sdb: sdb1
[17179588.724000] sd 2:0:0:0: Attached scsi removable disk sdb
[17179588.724000] usb-storage: device scan complete
[17179596.000000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179596.000000]  1:0:0:0: Attached scsi generic sg1 type 5
[17179596.000000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[17179596.084000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[17179596.084000] Uniform CD-ROM driver Revision: 3.20
[17179596.084000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[17179597.472000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179597.476000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179597.584000] usb 5-6: USB disconnect, address 2
[17179597.644000] Linux agpgart interface v0.101 (c) Dave Jones
[17179597.648000] agpgart: Detected an Intel 945GM Chipset.
[17179597.668000] agpgart: AGP aperture is 256M @ 0x0
[17179597.924000] nvidia: module license 'NVIDIA' taints kernel.
[17179597.928000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179597.928000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[17179597.928000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8776  Mon Oct 16 21:56:04 PDT 2006
[17179598.288000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 58
[17179598.288000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179598.896000] hw_random hardware driver 1.0.0 loaded
[17179599.228000] Bluetooth: Core ver 2.8
[17179599.228000] NET: Registered protocol family 31
[17179599.228000] Bluetooth: HCI device and connection manager initialized
[17179599.228000] Bluetooth: HCI socket layer initialized
[17179599.240000] Bluetooth: HCI USB driver ver 2.9
[17179599.240000] usbcore: registered new driver hci_usb
[17179599.724000] ieee80211_1_1_13_crypt: registered algorithm 'NULL'
[17179599.804000] ACPI: PCI Interrupt 0000:08:06.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179599.804000] Yenta: CardBus bridge found at 0000:08:06.0 [103c:30a5]
[17179599.804000] Yenta: Enabling burst memory read transactions
[17179599.804000] Yenta: Using INTVAL to route CSC interrupts to PCI
[17179599.804000] Yenta: Routing CardBus interrupts to ISA
[17179599.804000] Yenta TI: socket 0000:08:06.0, mfunc 0x01aa1b22, devctl 0x64
[17179599.820000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13
[17179599.820000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179599.832000] ieee80211_crypt: registered algorithm 'NULL'
[17179599.836000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[17179599.836000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179600.036000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 185
[17179600.036000] Socket status: 30000006
[17179600.036000] Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c
[17179600.036000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[17179600.036000] cs: IO port probe 0x3000-0x3fff: clean.
[17179600.036000] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff
[17179600.036000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
[17179600.440000] Real Time Clock Driver v1.12
[17179600.496000] sdhci: Secure Digital Host Controller Interface driver, 0.10
[17179600.496000] sdhci: Copyright(c) Pierre Ossman
[17179600.496000] ACPI: PCI Interrupt 0000:08:06.3[D] -> GSI 20 (level, low) -> IRQ 66
[17179600.548000] sdhci: ============== REGISTER DUMP ==============
[17179600.548000] sdhci: Sys addr: 0x00000000 | Version:  0x00008900
[17179600.548000] sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
[17179600.548000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[17179600.548000] sdhci: Present:  0x000a0000 | Host ctl: 0x00000000
[17179600.548000] sdhci: Power:    0x00000000 | Blk gap:  0x00000000
[17179600.548000] sdhci: Walk up:  0x00000000 | Clock:    0x00000000
[17179600.548000] sdhci: Timeout:  0x0000000e | Int stat: 0x00000000
[17179600.548000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[17179600.548000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[17179600.548000] sdhci: Caps:     0x018030b0 | Max curr: 0x00000000
[17179600.548000] sdhci: ===========================================
[17179600.600000] mmc0: SDHCI at 0xd2007800 irq 66 DMA
[17179600.616000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
[17179600.616000] e100: Copyright(c) 1999-2005 Intel Corporation
[17179600.616000] ACPI: PCI Interrupt 0000:08:08.0[A] -> GSI 20 (level, low) -> IRQ 66
[17179600.632000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[17179600.704000] e100: eth0: e100_probe: addr 0xd2006000, irq 66, MAC addr 00:16:D4:0E:3C:4A
[17179600.748000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[17179601.344000] ts: Compaq touchscreen protocol output
[17179601.596000] cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
[17179601.600000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[17179601.600000] cs: IO port probe 0x820-0x8ff: clean.
[17179601.600000] cs: IO port probe 0xc00-0xcf7: clean.
[17179601.604000] cs: IO port probe 0xa00-0xaff: clean.
[17179603.164000] NET: Registered protocol family 17
[17179606.044000] lp: driver loaded but no devices found
[17179606.088000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179606.088000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179606.088000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179606.144000] Adding 570268k swap on /dev/sda6.  Priority:-1 extents:1 across:570268k
[17179606.352000] EXT3 FS on sda5, internal journal
[17179606.548000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179606.548000] md: bitmap version 4.39
[17179607.076000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179610.380000] cdrom: open failed.
[17179612.868000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179612.968000] NTFS volume version 3.1.
[17179613.176000] NTFS volume version 3.1.
[17179620.380000] ACPI: AC Adapter [ACAD] (on-line)
[17179620.428000] ACPI: Battery Slot [BAT1] (battery present)
[17179620.544000] ACPI: Power Button (FF) [PWRF]
[17179620.544000] ACPI: Lid Switch [LID]
[17179620.544000] ACPI: Power Button (CM) [PWRB]
[17179620.700000] ibm_acpi: ec object not found
[17179620.740000] pcc_acpi: loading...
[17179620.864000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[17179620.864000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[17179622.304000] driverloader: stack=8192/60/0 PREEMPT
[17179622.304000] usbcore: registered new driver driverloader
[17179622.660000] driverloader: w39n51.sys: 0xf8df3000..0xf8f4fc00 entry = f8df3b20 (pbase = 0x10000)
[17179622.660000] driverloader: /var/lib/driverloader/ntoskrnl.exe: unable to open (err=-2)
[17179622.660000] driverloader: w39n51.sys: export not found: strncat (ntoskrnl.exe)
[17179622.660000] driverloader: /var/lib/driverloader/ntoskrnl.exe: unable to open (err=-2)
[17179622.660000] driverloader: w39n51.sys: export not found: KeQueryTickCount (ntoskrnl.exe)
[17179622.660000] driverloader: /var/lib/driverloader/ntoskrnl.exe: unable to open (err=-2)
[17179622.660000] driverloader: w39n51.sys: export not found: InterlockedPushEntrySList (ntoskrnl.exe)
[17179622.660000] driverloader: /var/lib/driverloader/ntoskrnl.exe: unable to open (err=-2)
[17179622.660000] driverloader: w39n51.sys: export not found: InterlockedPopEntrySList (ntoskrnl.exe)
[17179622.660000] driverloader: /var/lib/driverloader/ndis.sys: unable to open (err=-2)
[17179622.660000] driverloader: w39n51.sys: export not found: NdisIMCopySendPerPacketInfo (NDIS.SYS)
[17179622.660000] driverloader: /var/lib/driverloader/hal.dll: unable to open (err=-2)
[17179622.660000] driverloader: w39n51.sys: export not found: KeQueryPerformanceCounter (HAL.dll)
[17179622.660000] driverloader: unable to load "w39n51.sys" (-6)
[17179626.264000] ppdev: user-space parallel port driver
[17179626.672000] apm: BIOS not found.
[17179633.316000] Bluetooth: L2CAP ver 2.8
[17179633.316000] Bluetooth: L2CAP socket layer initialized
[17179633.344000] Bluetooth: RFCOMM socket layer initialized
[17179633.344000] Bluetooth: RFCOMM TTY layer initialized
[17179633.344000] Bluetooth: RFCOMM ver 1.7
[17179661.996000] NET: Registered protocol family 10
[17179661.996000] lo: Disabled Privacy Extensions
[17179661.996000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179661.996000] IPv6 over IPv4 tunneling driver
[17180360.112000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[17180360.116000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[17180374.808000] eth0: no IPv6 routers present
[17181247.164000] usb 5-6: new high speed USB device using ehci_hcd and address 4
[17181247.296000] scsi3 : SCSI emulation for USB Mass Storage devices
[17181247.296000] usb-storage: device found at 4
[17181247.296000] usb-storage: waiting for device to settle before scanning
[17181252.296000]   Vendor: USB2.0    Model: Mobile Disk       Rev: 1.00
[17181252.296000]   Type:   Direct-Access                      ANSI SCSI revision: 02
[17181252.296000] SCSI device sdb: 1007616 512-byte hdwr sectors (516 MB)
[17181252.300000] sdb: Write Protect is off
[17181252.300000] sdb: Mode Sense: 00 00 00 00
[17181252.300000] sdb: assuming drive cache: write through
[17181252.300000] SCSI device sdb: 1007616 512-byte hdwr sectors (516 MB)
[17181252.300000] sdb: Write Protect is off
[17181252.300000] sdb: Mode Sense: 00 00 00 00
[17181252.300000] sdb: assuming drive cache: write through
[17181252.300000]  sdb: sdb1
[17181252.444000] sd 3:0:0:0: Attached scsi removable disk sdb
[17181252.444000] sd 3:0:0:0: Attached scsi generic sg2 type 0
[17181252.448000] usb-storage: device scan complete
[17181252.992000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17185002.400000] cdrom: open failed.
[17185005.076000] cdrom: open failed.
[17185042.188000] usb 4-1: USB disconnect, address 2
[17185168.484000] cdrom: open failed.
[17185171.124000] cdrom: open failed.
[17185178.504000] cdrom: open failed.
[17185181.128000] cdrom: open failed.
[17185219.936000] cdrom: open failed.
[17185222.560000] cdrom: open failed.
[17185961.260000] usb 4-1: new full speed USB device using uhci_hcd and address 3