Bootdata ok (command line is root=/dev/sda6) Linux version 2.6.18-gentoo (root@sabayonx86-64) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 SMP Sun Oct 8 15:17:26 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ef90000 (usable) BIOS-e820: 000000003ef90000 - 000000003ef9e000 (ACPI data) BIOS-e820: 000000003ef9e000 - 000000003efe0000 (ACPI NVS) BIOS-e820: 000000003efe0000 - 000000003f000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.4 present. ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa950 ACPI: XSDT (v001 A M I OEMXSDT 0x09000621 MSFT 0x00000097) @ 0x000000003ef90100 ACPI: FADT (v003 A M I OEMFACP 0x09000621 MSFT 0x00000097) @ 0x000000003ef90290 ACPI: MADT (v001 A M I OEMAPIC 0x09000621 MSFT 0x00000097) @ 0x000000003ef90390 ACPI: MCFG (v001 A M I OEMMCFG 0x09000621 MSFT 0x00000097) @ 0x000000003ef90400 ACPI: OEMB (v001 A M I AMI_OEM 0x09000621 MSFT 0x00000097) @ 0x000000003ef9e040 ACPI: HPET (v001 A M I OEMHPET 0x09000621 MSFT 0x00000097) @ 0x000000003ef97af0 ACPI: GSCI (v001 A M I GMCHSCI 0x09000621 MSFT 0x00000097) @ 0x000000003ef9e0c0 ACPI: DSDT (v001 A0518 A0518000 0x00000000 INTL 0x20060113) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000003ef90000 Bootmem setup node 0 0000000000000000-000000003ef90000 On node 0 totalpages: 252714 DMA zone: 2344 pages, LIFO batch:0 DMA32 zone: 250370 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0x8086a202 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3f000000:bfe00000) SMP: Allowing 4 CPUs, 2 hotplug CPUs Built 1 zonelists. Total pages: 252714 Kernel command line: root=/dev/sda6 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 2133.335 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... Memory: 1008840k/1031744k available (3211k kernel code, 22516k reserved, 2200k data, 204k init) Calibrating delay using timer specific routine.. 4270.37 BogoMIPS (lpj=8540752) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20060707 Using local APIC timer interrupts. result 16666669 Detected 16.666 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4266.68 BogoMIPS (lpj=8533378) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 Brought up 2 CPUs testing NMI watchdog ... OK. migration_cost=21 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz PCI-GART: No AMD northbridge found. PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: fa700000-fe7fffff PREFETCH window: bfe00000-dfdfffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: dfe00000-dfefffff PCI: Bridge: 0000:00:1c.4 IO window: b000-bfff MEM window: fe900000-fe9fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: a000-afff MEM window: fe800000-fe8fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: fea00000-feafffff PREFETCH window: disabled. GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered IA-32 Microcode Update Driver: v1.14a Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.27 [Flags: R/O]. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] Allocate Port Service[0000:00:1c.5:pcie02] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.101 (c) Dave Jones ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1 floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006 libata version 2.00 loaded. ahci 0000:03:00.0: version 2.0 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:03:00.0 to 64 ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC2000000C100 ctl 0x0 bmdma 0x0 irq 169 ata2: SATA max UDMA/133 cmd 0xFFFFC2000000C180 ctl 0x0 bmdma 0x0 irq 169 scsi0 : ahci ata1: SATA link down (SStatus 0 SControl 300) scsi1 : ahci ata2: SATA link down (SStatus 0 SControl 300) ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] GSI 18 sharing vector 0xE1 and IRQ 18 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata3: SATA max UDMA/133 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 225 ata4: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 225 scsi2 : ata_piix ata3.00: ATA-7, max UDMA7, 781422768 sectors: LBA48 NCQ (depth 0/32) ata3.00: ata3: dev 0 multi count 16 ata3.00: configured for UDMA/133 scsi3 : ata_piix ATA: abnormal status 0x7F on port 0xE807 Vendor: ATA Model: SAMSUNG HD401LJ Rev: ZZ10 Type: Direct-Access ANSI SCSI revision: 05 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ata5: SATA max UDMA/133 cmd 0xD400 ctl 0xD082 bmdma 0xC880 irq 225 ata6: SATA max UDMA/133 cmd 0xD000 ctl 0xCC02 bmdma 0xC888 irq 225 scsi4 : ata_piix ATA: abnormal status 0x7F on port 0xD407 scsi5 : ata_piix ATA: abnormal status 0x7F on port 0xD007 SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sd 2:0:0:0: Attached scsi disk sda sd 2:0:0:0: Attached scsi generic sg0 type 0 Fusion MPT base driver 3.04.01 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.01 Fusion MPT SAS Host driver 3.04.01 GSI 19 sharing vector 0xE9 and IRQ 19 ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 20 (level, low) -> IRQ 233 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[233] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: raw1394: /dev/raw1394 device initialized GSI 20 sharing vector 0x32 and IRQ 20 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 50, io mem 0xfebff800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected GSI 21 sharing vector 0x3A and IRQ 21 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 58, io mem 0xfebff400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000dc00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 177, io base 0x0000e000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 58, io base 0x0000d480 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 225, io base 0x0000d800 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 50, io base 0x0000d880 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com Intel 810 + AC97 Audio, version 1.01, 15:16:36 Oct 8 2006 oprofile: using NMI interrupt. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 ACPI: (supports S0 S1 S3 S4 S5) ReiserFS: sda6: found reiserfs format "3.6" with standard journal ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000035799a] ReiserFS: sda6: using ordered data mode ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda6: checking transaction log (sda6) ReiserFS: sda6: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 204k freed ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Identified chip type is 'RTL8168B/8111B'. eth0: r10001.04, the Linux device driver for Realtek Ethernet Controllers at 0xa800, 00:17:31:65:7b:3e, IRQ 177 Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter Driver version:1.04 Released date:2006/07/07 Link Status:Linked Link Speed:100Mbps Duplex mode:Full-Duplex I/O Base:0xA800(I/O port) IRQ:177 Unable to handle kernel paging request at ffffffff8800dc80 RIP: [] sys_init_module+0x9db/0x17a5 PGD 203027 PUD 205027 PMD 3dadd067 PTE 0 Oops: 0002 [1] SMP CPU 0 Modules linked in: r1000 Pid: 2298, comm: modprobe Not tainted 2.6.18-gentoo #1 RIP: 0010:[] [] sys_init_module+0x9db/0x17a5 RSP: 0018:ffff81003dd85e68 EFLAGS: 00010246 RAX: ffffffff8800dc80 RBX: ffffc20000198000 RCX: 0000000000000000 RDX: 000000000000001c RSI: ffffc2000019f57c RDI: ffffffff8800c424 RBP: fffffffffffffff4 R08: ffffc2000019b7f8 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000004 R13: ffffc2000019b138 R14: ffffffff8800ca80 R15: 0000000000508b50 FS: 00002b12341b6ae0(0000) GS:ffffffff807e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffff8800dc80 CR3: 000000003c9dc000 CR4: 00000000000006e0 Process modprobe (pid: 2298, threadinfo ffff81003dd84000, task ffff81003c9a2750) Stack: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000010 0000000000000000 0000000c00000000 0000000a00000000 0000000000000000 ffffc2000019e820 ffff81003d4a9e20 0000000000000000 Call Trace: [] system_call+0x7e/0x83 DWARF2 unwinder stuck at system_call+0x7e/0x83 Leftover inexact backtrace: Code: 49 89 86 00 12 00 00 48 89 40 08 31 d2 89 d0 48 c1 e0 07 4c RIP [] sys_init_module+0x9db/0x17a5 RSP CR2: ffffffff8800dc80 <6>Adding 2096440k swap on /dev/sda5. Priority:-1 extents:1 across:2096440k eth0: no IPv6 routers present sh[3153]: segfault at 0000000000000000 rip 00002b69309e0892 rsp 00007fff7a5b2528 error 4 sh[3029]: segfault at 0000000000000013 rip 00002b69309e0892 rsp 00007fff7a5b29c8 error 4 sh[2987]: segfault at 0000000000000000 rip 00002b92daf46892 rsp 00007fffd0050d58 error 4 sh[2890]: segfault at 0000000000000019 rip 00002b978f47f892 rsp 00007fff1bb15f28 error 4 sh[2886]: segfault at 0000000000000000 rip 00002ab93aefb892 rsp 00007fff7009bdb8 error 4