Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #0: Mon Jun  5 11:20:12 UTC 2006
    technix@amateria:/usr/obj/usr/src/sys/FRENZY
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.34-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
  AMD Features2=0x1<LAHF>
real memory  = 2079260672 (1982 MB)
avail memory = 2025385984 (1931 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
netsmb_dev: loaded
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <display, VGA> at device 0.0 (no driver attached)
pci0: <display, VGA> at device 5.0 (no driver attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
ichsmb0: <SMBus controller> port 0x1c00-0x1c3f,0x1c40-0x1c7f irq 20 at device 10.1 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq 21 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff irq 22 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: waiting for BIOS to give up control
usb1: timed out waiting for BIOS
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xefffd000-0xefffdfff irq 23 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
rl0: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem 0xefdff000-0xefdff0ff irq 16 at device 7.0 on pci4
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:30:bd:ba:0d:84
rl0: [GIANT-LOCKED]
pcm0: <nVidia nForce 410 MCP> port 0xdc00-0xdcff,0xd800-0xd8ff mem 0xefffc000-0xefffcfff irq 20 at device 16.2 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
pci0: <bridge> at device 20.0 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: KYE Optical Mouse, rev 1.10/1.10, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounter "TSC" frequency 1808341005 Hz quality 800
Timecounters tick every 1.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
IPsec: Initialized Security Association Processing.
ncp_load: loaded
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
md0: Preloaded image </boot/frenzyroot> 2097152 bytes at 0xc0d230bc
acd0: DVDR <HL-DT-ST DVDRAM GSA-H10N/JL10> at ata0-master UDMA33
ad4: 238475MB <Seagate ST3250820AS 3.AAC> at ata2-master SATA150
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-H10N JL10> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: cd present [129549 x 2048 byte records]
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <WDC WD16 00BB-00GUC0 0811> Fixed Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 152627MB (312581808 512 byte sectors: 255H 63S/T 19457C)
Trying to mount root from ufs:/dev/md0
md1.uzip: 5547 x 130560 blocks
ext2fs: ad4s1: wrong magic number 0xffff (expected 0xef53)
ext2fs: ad4s2: wrong magic number 0xffff (expected 0xef53)
mountmsdosfs(): disk too big, sorry
fuse4bsd: version 0.3.0, FUSE ABI 7.5