alinux@ubuntu:~$ smartctl -l long /dev/hda smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ =======> INVALID ARGUMENT TO -l: long =======> VALID ARGUMENTS ARE: error, selftest, selective, directory <======= Use smartctl -h to get a usage summary alinux@ubuntu:~$ smartctl -t long /dev/hda smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Smartctl open device: /dev/hda failed: Permission denied alinux@ubuntu:~$ sudo smartctl -t long /dev/hda Password: smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-li ne mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 65 minutes for test to complete. Test will complete after Wed Oct 26 22:10:23 2005 Use smartctl -X to abort test. alinux@ubuntu:~$ sudo smartctl -a /dev/hda smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK6021GAS Serial Number: 33GL2597T Firmware Version: GA023A Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Oct 26 21:13:24 2005 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: ( 587) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 65) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1289 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3012 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 2 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 6003 10 Spin_Retry_Count 0x0033 159 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1978 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 263 193 Load_Cycle_Count 0x0032 076 076 000 Old_age Always - 246091 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 41 (Lifetime Min/Max 11/65) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 4 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 73 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 99 222 Loaded_Hours 0x0032 090 090 000 Old_age Always - 4342 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 157 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 451 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 451 occurred at disk power-on lifetime: 5970 hours (248 days + 18 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 86 49 96 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00964986 = 984922 2 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 7f 49 96 e0 00 00:19:21.223 READ DMA ef 03 45 01 00 00 a0 02 00:19:21.211 SET FEATURES [Set transfer mode] ef 03 0c 01 00 00 a0 02 00:19:21.211 SET FEATURES [Set transfer mode] c6 03 10 01 00 00 a0 02 00:19:21.211 SET MULTIPLE MODE 91 03 3f 01 00 00 af 02 00:19:21.210 INITIALIZE DEVICE PARAMETERS [OBS-6 ] Error 450 occurred at disk power-on lifetime: 5968 hours (248 days + 16 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 de 25 41 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x004125de = 426953 4 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 d7 25 41 e0 00 00:18:04.408 READ DMA ef 03 45 01 00 00 a0 02 00:18:04.396 SET FEATURES [Set transfer mode] ef 03 0c 01 00 00 a0 02 00:18:04.396 SET FEATURES [Set transfer mode] c6 00 10 01 00 00 a0 02 00:18:04.395 SET MULTIPLE MODE 91 00 3f 01 00 00 af 02 00:18:04.395 INITIALIZE DEVICE PARAMETERS [OBS-6 ] Error 449 occurred at disk power-on lifetime: 5925 hours (246 days + 21 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 a0 2f 5e e5 Error: UNC 3 sectors at LBA = 0x055e2fa0 = 90058656 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 26 7d 2f 5e e5 00 01:27:43.812 READ DMA c8 00 28 7b 2f 5e e5 00 01:27:35.340 READ DMA c8 00 2a 79 2f 5e e5 00 01:27:26.883 READ DMA c8 00 2c 77 2f 5e e5 00 01:27:18.397 READ DMA c8 00 2e 75 2f 5e e5 00 01:27:09.926 READ DMA Error 448 occurred at disk power-on lifetime: 5925 hours (246 days + 21 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 a0 2f 5e e5 Error: UNC 3 sectors at LBA = 0x055e2fa0 = 90058656 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 28 7b 2f 5e e5 00 01:27:35.340 READ DMA c8 00 2a 79 2f 5e e5 00 01:27:26.883 READ DMA c8 00 2c 77 2f 5e e5 00 01:27:18.397 READ DMA c8 00 2e 75 2f 5e e5 00 01:27:09.926 READ DMA c8 00 30 73 2f 5e e5 00 01:27:01.468 READ DMA Error 447 occurred at disk power-on lifetime: 5925 hours (246 days + 21 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 a0 2f 5e e5 Error: UNC 3 sectors at LBA = 0x055e2fa0 = 90058656 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 2a 79 2f 5e e5 00 01:27:26.883 READ DMA c8 00 2c 77 2f 5e e5 00 01:27:18.397 READ DMA c8 00 2e 75 2f 5e e5 00 01:27:09.926 READ DMA c8 00 30 73 2f 5e e5 00 01:27:01.468 READ DMA c8 00 32 71 2f 5e e5 00 01:26:53.010 READ DMA SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging alinux@ubuntu:~$